OVERALL DIMENSIONS
(59.7)
23 1/2"
24 3/4"
23 7/8"
22 1/16"
ZIR240NPKIIMONOGRAM 24" INTEGRATED REFRIGERATOR
(62.9)
(60.6)
(56.0)
SPECIFICATIONS
Overall Width 23 1/2" (59.7 cm)
Overall Height 83 3/8" (211.8 cm)
Overall Depth 24 3/4" (62.9 cm)
Door Clearance at 90°
Door Clearance at 115°
Cutout Width 23 3/4" (60.3 cm)
Cutout Height 84" (213.4 cm)
Cutout Depth 25" (63.5 cm)
Plumbing Requirements GE SmartConnect
Net Weight (approx) 460 lb (208.7 kg)
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power
supply is required. An individual properly
grounded branch circuit or circuit breaker
is recommended. For multiple unit
installation, each unit requires separate
individually properly grounded circuit or
breaker and separate properly grounded
3-prong electrical receptacle recessed.
27 1/4" (69.2 cm)
24 1/2" (62.2 cm)
kit
83 3/8"
(211.8)
FRONT VIEW
(59.1)
23 1/4"
27 1/4"
(69.2)
TOP VIEWS
4"
(10.1)
23 1/4"
SIDE VIEW
(59.1)
83 1/4"
(211.5)
24 1/2"
(62.2)
WARNING:
When installing appliance, you must
use and follow the product installation
instructions. These can be found with unit
or on web at monogram.com.
DOOR OPEN 90˚ DOOR OPEN 115˚
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
Product Specification Revised 8/17
MONOGRAM 24" INTEGRATED REFRIGERATOR ZIR240NPKII
SINGLE INSTALLATION
FLUSH INSTALLATION
NOTES
WARNING:
When installing appliance, you
must use and follow the product
installation instructions. These can
be found with unit or on web at
monogram.com.
This document is intended for
cabinet and panel construction
only.
NOTES
C
A minimum 3 1/2" (8.9) finished
return matching cabinet exterior
recommended on interior on all
sides and top at front of opening
84"
(213.4)
9 1/2"
(24.1)4"(10.2)
4 3/8"
(11.1)
23 3/4" (60.3)
C
3 1/2"
(8.9)
Finished
Return
25" (63.5)
Back
ELEC W
5"
(12.7)
FRONT VIEW
6 3/4"
(17.2)
2 1/2"
(6.4)
SIDE VIEW
FLUSH 3/4" PANEL DIMENSIONS SINGLE INSTALLATION
A
Door
Panel
B
PANEL DIMENSIONS
A B
23 1/2" 79 7/8"
NOTES
Trimmed refrigerators are
designed to be customized with
decorative panels. Field-installed
3/4" custom door panels are
required.
Maximum total panel weight:
• Door panel – 45 lbs.
Note: For panels constructed with
rails and stiles (5-panel), the rails
and stiles must be a minimum of
2" wide.
For Custom Panels: Use templates
provided with units to pre-drill
holes for mounting panel brackets
(provided with unit). Adjustment
screws and instructions also
provided with units.
Door Handles: Custom handles are
required for flush installation.
ZKHCSSK: European tubular
stainless steel handle designed to
fit 3/4" panels. Kit includes one
handle – 44 1/4" long.
ZKCSC244: Door panel with
European tubular stainless steel
handle
ZKCSP244: Door panel with
Professional stainless handle
Product Specification Revised 8/17