MONOGRAM DOUBLE-DRAWER
REFRIGERATOR
ZIDS240NSS
When ordering this product,
be sure to use the model number
associated with the chosen handle.
Statemenet handle
ZXGD2H2PPSS
Minimalist handle
ZXGD2H2CPSS
MINIMALIST HANDLE
Model is shown with the Minimalist
handle, which needs to be ordered
separately. To order this handle use
model number ZXGD2H2CPSS.
DIGITAL TOUCH CONTROLS
Offer a ra nge of temperatures for precise chilling of a variety
of fresh foods and beverages, a nd a LED display allows easy
viewing of temperatures
FULL-EXTENSION SLIDE-OUT REFRIGERATED
DRAWERS
Storage for everything from whole melons to 146 12-oz. cans
SPACIOUS INTERIOR WITH ADJUSTABLE DIVIDERS,
FOLD-DOWN SHELF AND REMOVABLE DRAWER BIN
Maximizes useable storage space a nd flexibility
SOFT INTERIOR LED LIGHTING
Automatically illumina tes when the door is open, but can be
activated by a n internal on/off switch
FLUSH INSTALLATION
Allows near-sea mless integration with surrounding cabinetry
For questions about your
appliance, please call 1-800-626-2000.
PAGE 1 OF 3
Product Specication Revised 10/19
OVERALL DIMENSIONS
23 5/8" (60.0)
FRONT VIEW
34 1/4"
(87.0)
SPECIFICATIONS
Overall Width 23 1/2" (59.7 cm)
Overall Height 34 3/4" (88.3 cm)
Overall Depth 23 1/4" (59.1 cm)
Overall Capacity 5.0 cu. ft.
Minimum Cabinet Width 23 3/4" (60.3 cm)
Minimum Cabinet Depth 24" (61.0 cm)
Cutout Width 23 3/4" (60.3 cm)
34 1/2" (87.6 cm) Min
Cutout Height
35" (88.9 cm) Max
Electrical Requirements 1.2 A
Voltz/Hertz/Amps 120 V, 60 Hz, 15 or 20 amp circuit
Shipping Weight 155 lb (70.5 kg)
ATTENTION ELECTRICIAN:
A 115 volt 60Hz, 15 or 20 amp power supply is required. An
individual properly grounded branch circuit or circuit breaker
is recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.
24 1/2" (62.2)
21 3/4" (55.3)
SIDE VIEW
23 5/8" (60.0)
34 1/4"
(87.0)
For questions about your
appliance, please call 1-800-626-2000.
PAGE 2 OF 3
TOP VIEW
Dimensions in parentheses a re in centimeters unless otherwise noted.
Actual product dimensions may vary due to ma nufacturing tolerances.
Product Specication Revised 10/19