Monogram ZHU36RDJBB Specifications

OVERALL DIMENSIONS

ZHU36RDJBBMONOGRAM 36" INDUCTION COOKTOP

SPECIFICATIONS

Overall Width 36" (91.4 cm)

Overall Depth 20 3/8" (51.8 cm)

Overall Height 4 5/8" (11.8 cm)

Cut-out Width 33 7/8" (86.0 cm)

Cut-out Depth 19 1/8" (48.6 cm)

Conduit Length 48" (122 cm)

Electrical Rating

Recommended Circuit
Breaker Size

Net Weight 48 lbs. (21.8 kg)

Approx. Shipping
Weight

11,600W at 240V/60Hz

10,100W at 208V/60Hz

50 Amps

58 lbs. (27.6 kg)

1 1/16"

(2.7)

Cutout

overlap

20 3/8"

(51.8)

36" (91.4)

33 7/8" (86.0)

Cutout width

TOP VIEW (SHOWING CUTOUT OVERLAP)

R 1/2" (1.3)

All Four Corners

5/8"

(1.6)

Cutout

overlap

19 1/8"

(48.6)

Cutout

depth

OPTIONAL ACCESSORIES

Precision Cooking Kit JXSOUSV1

Flush-Mount Kit JXFLUSH1

ATTENTION ELECTRICIAN:

This cooktop is provided with a 48"
flexible conduit and must be hard wired
(direct wired) into an approved junction
box and be properly grounded. It is not
permitted to use a “plug and receptacle”
type installation on this cooktop.

Use a two-wire, three conductor 208/240
VAC, 60 Hertz electrical system. A white
(neutral) wire is not needed for this
cooktop

For more details refer to the installation
instructions for this product.

3 1/16"

(7.8)

1 1/8"

(2.9)

3/4"

(1.9)

FRONT VIEW

Front of Cooktop

18 15/16" (48.1)

Baffle

33 3/4" (85.7)

SIDE VIEW

3/16"

(0.5)

4 7/16"

(11.3)

Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.

Product Specification Revised 3/18

ZHU36RDJBBMONOGRAM 36" INDUCTION COOKTOP

INSTALLATION

B

E

Locate electrical junction box

at least

A

16" (40.6) min

To electrical junction box

16" below the countertop

F

36 " (91.4)

Cabinet base

COUNTERTOP CUT-OUT
DIMENSIONS

33 7/8" (86.0) min

34" (86.3) max

Cutout width

FRONT

TOP VIEW OF CUTOUT SIDE VIEW

Dimensions in parentheses are in centimeters unless otherwise noted.

C

19 1/8" (48.6) min
19 1/4" (48.9) max

Cutout depth

15"

D

(38.1)

min

1 3/4" (4.5) min

Clearance between the
rear edge of the cutout

and the nearest wall

behind the cooktop

2 1/2" (6.4) min

Clearance between the

front edge of the cutout

and the front edge of the

countertop

3"

(7.6) min

DRAWER

SIDE VIEWFRONT VIEW

ADA INSTALLATION

5"

(12.7) min

H

13"

(33.0) max

G

NOTES

A

Wall coverings, countertop

NOTES

and cabinets surrounding
cooktop must be able to
withstand temperatures of
up to 200ºF.

B

Minimum 30" clearance

from countertop to
unprotected overhead
surfaces, when no
ventilation hood or
microwave oven is installed.

C

When using a ventilation

hood or microwave
oven above the cooktop,
see hood or microwave
installation instructions
for minimum overhead
clearance dimensions.

D

Minimum 15" of clearance

from countertop to nearest
overhead surface on both
sides of cooktop. Make sure
to include any lighting rail
covers in calculation.

E

Minimum 2" distance from

edge of cutout to nearest
adjacent side wall below
upper cabinets.

F

Install an approved

junction box where it can
be easily reached through
the front of the cabinet
where the cooktop is
located. IMPORTANT: For
serviceability, the junction
box must be located where
it will allow considerable
slack in the 48" long
conduit.

G

Maximum 13" depth of

unprotected overhead
surfaces, when no
ventilation hood or
microwave oven is installed.

H

For Americans with

Disabilities Act (ADA)
forward approach
installation: Minimum 5"
clearance between the
top of the countertop
and the enclosure. The
enclosure must be made
of at least 1/4" thick wood
material, and must have
an access panel installed
in order to provide access
to the junction box and
hold-down brackets, and
to allow for service of the
cooktop.

For more details refer to the
installation instructions for this
product.

Product Specification Revised 3/18