Monogram ZGU366NTSS Specification Sheet

MONOGRAM 36" PROFESSIONAL GAS RANGETOP WITH 6 BURNERS
ZGU366NTSS (NATURAL GAS)
BURNER PERFORMANCE
Front Left Burner Element 23,000-BTU
Back Left Burner Element 18,000-BTU
Front Middle Burner Element 15,000-BTU
Back Middle Burner Element 15,000-BTU
Front Right Burner Element 23,000-BTU
Back Right Burner Element 18,000-BTU
VERSATILE GAS BURNER CONFIGURATION Delivering exceptional cooking flexibility, the two 23,000-BTU multi-ring brass burners and dual-stack burners offer a range of heat settings, from gentle simmer to intense fla me
RING-LIT KNOBS Delivering a modern approach to accent lighting, the rings illuminate to indica te when a burner is in use
SOLID BRASS BLADES ON PRECISION MACHINED KNOBS
With an unma tched attention to deta il, all knobs on the new Monogram Pro ra nges and ra ngetops come with solid brass accents
SEAMLESS STAINLESS TOP FRAME Meticulously crafted from one piece of sta inless steel that covers the cooktop and control pa nel, this seamless a nd stylish surface is easy to clean a nd beautiful to look a t
LP CONVERSION KIT INCLUDED Designed to deliver a sea mless conversion experience, this self­contained kit includes everything needed to convert a rangetop to liquid propane
For questions about your appliance, please call 1-800-626-2000.
PAGE 1 OF 4
Product Specication Created 12/20
OVERALL DIMENSIONS
SPECIFICATIONS
Overall Width 35 7/8" (91.1 cm)
Overall Depth 27 1/2" (69.8 cm)
Overall Height 8 1/2" (21.6 cm)
Volts/Hertz/Amps 120v; 60Hz; 15A
Net Weight 135 lbs (61.2 kg)
Approx. Shipping Weight 163 lbs (74 kg)
ATTENTION ELECTRICIAN: Rangetops must be supplied with 120V, 60Hz, and connected to an individual, properly grounded branch circuit protected by a 15 amp circuit breaker or time-delay fuse.
For more details refer to the installation instructions for this product.
8-1/2" Height
35-7/8" Width
27-5/8" to Front of Bullnose
29-1/8"
To front of control knobs
27-5/8"
To front of bullnose
8"
Countertop
Level
Include the overhang of the rear trim when countertop continues behind the product.
The overhang is decorative only. The weight of the rangetop is fully supported by the side trims.
** Maximum countertop cutout depth from the back of the rear trim to the back edge of chamfer at the sides of the control panel - typically, the maximum countertop cutout depth (front to back). Minimum countertop cutout depth is 25-1/4"
Rear finished edge of the control panel
23-5/8"
**26-7/8"
To front of
control panel
6-1/2"
7-1/4"
8-1/2" Height
5-1/4"
To pipe
stub center
1"
1/2"
Countertop
Level
3/16"
11/32"
1-3/16"
For questions about your appliance, please call 1-800-626-2000.
Dimensions in parentheses a re in centimeters unless otherwise noted. Actual product dimensions may vary due to ma nufacturing tolerances.
PAGE 2 OF 4 Product Specication Created 12/20
Loading...
+ 2 hidden pages