Monogram ZET1SHSS Specs
MONOGRAM 30" BUILT-IN SINGLE OVEN ZET1SHSS
ZET1SHSS
OVERALL DIMENSIONS
29 3/4" (75.6)
28 1/2" (72.4)
min cutout width
15/16"
(2.4)
5 3/16"
(13.2)
SPECIFICATIONS
Overall Width 29 3/4" (75.6 cm)
Overall Height 28 5/8" (72.7 cm)
Overall Depth
Including Handle
Oven Door Clearance 20 11/16" (52.6 cm)
Overall Oven
Interior Capacity
Oven Interior Dimensions
(W x H x D)
Minimum Cabinet Width* 30" (76.2 cm)
Minimum Cabinet Depth* 24" (61.0 cm)
Minimum Base Support 220 lbs. (99 kg)
Cutout Width*
Cutout Height*
Cutout Depth* 23 1/2" (59.7 cm) Min
Volts/Hertz/Amps 240/208 V AC, 60 Hz, 20A
Conduit Length
Electrical Rating
Shipping Weight 184 lbs. (84 kg)
* Additional space will be needed for flush installation.
ATTENTION ELECTRICIAN:
A 240/208V, 60Hz, 20 Amp circuit is
required. An individual properly grounded
branch circuit or circuit breaker is required.
Hardware junction box is required for
built-in product.
26 5/8" (67.7 cm)
5.0 cu. ft. (141.6 liters)
25" x 17 3/8" x 20 1/4"
(63.5 x 44.1 x 51.4 cm)
28 1/2" (72.4 cm) Min
28 5/8" (72.7 cm) Max
27 1/4" (69.2 cm) Min
27 5/16" (69.4 cm) Max
40" (72" available special
order: WB18T10398)
3.4 kW at 208V
4.5 kW at 240V
27 1/4"
(69.2)
min cutout
height
7/16"
(1.1)
FRONT VIEW (SHOWING CUTOUT OVERLAP)
24 5/8" (62.6)
1 5/16" (3.3)
7 1/4"
(18.4)
28 5/8"
(72.7)
2 5/8"
(6.8)
14 15/16"
(38.0)
8 3/8"
(21.4)
SIDE VIEW
5/8"
26 5/8"
(67.7)
(1.6)
2"
(5.1)
SHOWING DOOR CLEARANCE
28 1/2" (72 .4)
TOP VIEW
OPEN OVEN DOOR
10 1/2"
(26.6)
23 1/16"
(58.6)
12 1/2"
(31.8)
6 1/4"
(15.9)
1 7/8"
(4.8)
5/8"
(1.6)
8 3/8"
(21.4)
20 11/16"
(52.6)
min
3 1/2"
(8.8)
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
Product Specification Revised 5/19
MONOGRAM 30" BUILT-IN SINGLE OVEN ZET1SHSS
30" (76.2) flush inset width
with
1/8" (0.3) reveals
30" (76.2)
1 5/16"
(3.3)
27 1/4"
(69.2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
Side cleat
Top cleat
Bottom cleat
5 1/4"
(13.3)
9 1/2"
(24.1)
28 1/2" (72.4)
cutout width
3/4"
(1.9)
Side cleats
1 1/16"
(2.7)
Top cleat
24 13/16" (63.0)
cutout depth
23 1/2"
(59.7)
min cutout depth
2 1/2"
(6.4)
Side cleats
depth
29"
(73.7)
Flush inset
height with
1/8" (0.3)
reveal at top,
1/4" (0.6)
reveal at
bottom
11/16" (1.7) Bottom cleat
(Extends full depth of cabinet)
TOP VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
ZET1SHSS
ELEC.
ZET1SHSS
WALL INSTALLATION
23 1/2"
(59.7)
min cutout depth
27 1/4"
(69.2)
C
32 1/2"
(82.6)
Recommended
UNDERCOUNTER INSTALLATION
cutout
location
from floor
A
STANDARD
INSTALLATION
24 13/16" (63.0)
cutout depth
Top cleat
Side cleat
Bottom cleat
D
FLUSH INSET
INSTALLATION
C
1 5/16"
29"
(73.7)
Flush inset
height with
1/8" (0.3)
reveal at top,
1/4" (0.6)
reveal at
bottom
TOP VIEW
2 1/2"
(3.3)
30" (76.2) flush inset width
with
1 1/16"
(2.7)
Top cleat
3/4"
(1.9)
Side cleats
11/16" (1.7) Bottom cleat
(Extends full depth of cabinet)
1/8" (0.3) reveals
5 1/4"
28 1/2" (72.4)
cutout width
Side cleats
(13.3)
30" (76.2)
(6.4)
depth
B
ELEC.
9 1/2"
(24.1)
FLUSH INSET INSTALLATION
FRONT VIEW
Allow 1/8" (0.3) clearances
from side edges of oven door.
NOTES
A
Based on a user
height of 5' 6"
to 5' 10"
B
Junction box location
(May also be located
in adjacent cabinet.)
C
Platform must be
able to support
220 lbs (99 kg)
D
Cabinet surfaces
must be an
appearance finished
surface for flush
installation.
E
Cleats may be
visible and should
be finished to match
cabinetry.
F
Minimum 31 1/4" from
the top surface of
E
the countertop to the
top surface of the
wall oven support
platform when
installed beneath a
certified cooktop.
3
31 1/4"
(79.4) min
27 1/4"
F
(59.7) min cutout depth
(69.2)
STANDARD
INSTALLATION
23 1/2"
(7.6)
5 1/4"
28 1/2" (72.4)
min cutout width
3/4"
(1.9)
STANDARD INSTALLATION
FRONT VIEW
(13.3)
C
B
ELEC.
9 1/2"
(24.1)
For more details, refer to the installation instructions for this product on Monogram.com.
Dimensions in parentheses are in centimeters unless otherwise noted.
24 13/16"
(63.0)
cutout depth
FLUSH INSET
INSTALLATION
Product Specification Revised 5/19
Loading...