Monogram ZDT985SPNSS Specifications
OVERALL DIMENSIONS
ZDT870SPFSS & ZDT800SPFSS
ZDT985SPNSSMONOGRAM 24" FULLY INTEGRATED DISHWASHER
Subject to change
SPECIFICATIONS
Overall Width 23 3/4" (60.3 cm)
Overall Height
Overall Depth 24" (61 cm)
Door Clearance 25 1/2" (64.8 cm)
Overall Dishwasher
Capacity
Minimum Cabinet Width 24" (61 cm)
Minimum Cabinet Depth 24" (61 cm)
Cutout Width 24" (61 cm)
Cutout Height
Electrical Requirements 10.2 A
Hose Length
Voltz/Hertz/Amps
Shipping Weight 139 lb (63 kg)
33 3/8" (84.8 cm) Min
34 5/8" (88.0 cm) Max
16 Place Settings
33 1/2" (85.1 cm) Min
34 3/4" (88.3 cm) Max
No more than
12' (3.7 m)
115 V, 60 Hz,
15 or 20 amp circuit
33 3/8" min
34 5/8" max
(84.8 - 88.0)
2 11/16"
(6.8)
1 11/16" (4.3)
30"
(76.2)
3 1/2"
(8.9)
23 3/4" (60.3)
FRONT VIEW
24" (61.0)
SIDE VIEW
23 3/4" (60.3)
TOP VIEW
2" (5.1)
3 3/8" min
4 5/8" max
(8.6 - 11.8)
Toe kick
height
33 3/8" min
34 5/8" max
(84.8 - 88.0)
Height at rear
OPEN DISHWASHER DOOR
SHOWING DOOR CLEARANCE
2" (5.1)
min
clearance
to wall
Dimensions in parentheses are in
centimeters unless otherwise noted.
25 1/2"
(64.8)
2" (5.1)
min
clearance
to wall
Product Speciļ¬cation Created 8/19
MONOGRAM 24" FULLY INTEGRATED DISHWASHER ZDT985SPNSS
ZDT870SPFSS & ZDT800SPFSS
INSTALLATION
33 1/2"
(85.1) min
underside of
counter to floor
34 3/4"
max
(88.3)
FLUSH CUTOUT INSTALLATION
24" (61.0)
min cutout depth
4"(10.2)
B
6"
(15.2)
ELECTRIC/
WATER
NOTES
A
The dishwasher drain
hose must be no
more than 12 feet
in length for proper
drainage.
B
Electrical
connections are at
the right front of
the dishwasher and
water connections
are on the left. The
hot water line should
extend forward 30"
to 40" from the rear
wall. The electrical
must extend forward
at least 24" to reach
the junction box.
C
To prevent siphoning,
an air gap or high
drain loop must be
used.
24 " (61.0) Min
cutout width
B
6" (15.2)
ELECTRIC/
WATER
INSTALLATION CUTOUT FRONT VIEW
Product Speciļ¬cation Created 8/19
Loading...