Monogram ZDOD240HSS Quick Specs

ZDOD240HSS

OVERALL DIMENSIONS

23 5/8" (60)

FRONT VIEW

23 1/2" (59.7)

21 3/4" (55.3)

ZDOD240HSSGE Monogram® Outdoor/Indoor Refrigerator

36 1/4"

34 1/8"

(86.4)

(92.1)

SPECIFICATIONS

Overall Width 23 5/8" (60 cm)

Overall Height 36 1/4" (92.1 cm)

Overall Depth 23 1/2" (59.7 cm)

Door Clearance 9 15/16" (25.2 cm) @ 110°

3 3/16" (8.1 cm) @ 90°
21 13/16" (60.6) door length

Overall Capacity 5.4 cu. ft.

Minimum Cabinet Width 23 3/4" (60.3 cm)

Minimum Cabinet Depth 24" (60.9 cm)

Cutout Width 23 3/4" (60.3 cm)

Cutout Height 34 1/2" (87.7 cm) Min

36 1/2" (89 cm) Max

Electrical Requirements 1.0 A

Voltz/Hertz/Amps 120 V, 60 Hz,

15 or 20 amp circuit

Shipping Weight 154 lb (70 kg)

ATTENTION ELECTRICIAN:

A 115 volt 60Hz., 15 or 20 amp power supply
is required. An inidividual properly grounded
branch circuit or circuit breaker is recommended.
Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.

Dimensions in parentheses
are in centimeters unless
otherwise noted.

Actual product dimension
may vary due to
manufacturing tolerances.

SIDE VIEW

23 5/8" (60)

TOP VIEW

(SHOWING

DOOR SWING)

9 15/16"

(25.2)

3 3/16"

(8.1)

21 13/16"

(55.4)

Product Specification Created 7/14

GE Monogram® Outdoor/Indoor Refrigerator

ZDOD240PSS

ZDOD240HSS

INSTALLATION

34 1/2"

(87.7)

Min

underside of

counter to floor

??" (??) Max

FLUSH CUTOUT INSTALLATION

24"

(60.1)

min cutout depth

SIDE VIEW

23 3/4" (60.3) Min

cutout width

10 1/2" (26.7)

9" (22.9)

Max

ELECTRIC

1 1/2" (3.81)

INSTALLATION CUTOUT

FRONT VIEW

NOTES

Note: If installing between
frameless cabinets, a 1/2"
wide filler strip or side panel
may be required. The filler
strip will act as a spacer
between the door case and
adjacent cabinet and will
prevent interference with
cabinet door swing. The
width of the opening must
include filler panels.

Note: This product can be
installed as a built-in or
used free-standing. The top
canopy can be removed
for installation below a
countertop.

The cutout depth must
be 24"

The cutout dimensions
shown allows for a full door
swing and access to the
pull-out racks when installed
as a built-in.

• The outdoor/indoor
refrigerator can be used
freestanding.

• Stainless steel top canopy
can be removed for built-in
installation.

• Vented stainless steel
toekick.

Product Specification Created 7/14