Monogram ZDBI240HII Specifications

OVERALL DIMENSIONS

23 1/2" (59.7)

FRONT VIEW

ZDBI240HIIMONOGRAM BEVERAGE CENTER

34 1/4"

(87)

SPECIFICATIONS

Overall Width 23 1/2" (59.7 cm)

Overall Height 34 1/4" (87 cm)

Overall Depth 23 9/16" (59.8 cm)

Door Clearance 9 3/8" (23.8 cm) @ 110°

Overall Capacity 5.5 cu. ft.

Minimum Cabinet
Width

Minimum Cabinet
Depth

Cutout Width 23 3/4" (60.3 cm)

Cutout Height 34 1/2" (87.6 cm) Min

Electrical
Requirements

Voltz/Hertz/Amps 120 V, 60 Hz,

Shipping Weight 146 lb (66 kg)

5/8" (1.6 cm) @ 90°
23 5/8" (60.0) door
length

23 3/4" (60.3 cm)

24" (61.0 cm)

35" (88.9 cm) Max

1.2 A

15 or 20 amp circuit

24 1/2" (62.2)

21 1/2" (54.6)

SIDE VIEW

23 1/2" (59.7)

4 1/2"

(11.4)

ATTENTION ELECTRICIAN:

A 115 volt 60Hz., 15 or 20 amp power
supply is required. An individual properly
grounded branch circuit or circuit breaker
is recommended. Install a properly
grounded 3-prong electrical receptacle
recessed into the back wall.

Dimensions in parentheses are in
centimeters unless otherwise noted.

Actual product dimension may vary
due to manufacturing tolerances.

TOP VIEW

(SHOWING

DOOR SWING)

Product Specification Revised 1/18

5/8"

(1.6)

23 5/8"

(60.0)

ZDBI240HIIMONOGRAM BEVERAGE CENTER

ZDBI240WII, ZDWI240WII

INSTALLATION

34 1/2"

(87.6)

Min

underside of

counter to floor

35" (88.9) Max

CUTOUT INSTALLATION

(61.0)

24"

min cutout depth

SIDE VIEW

23 3/4" (60.3) Min

cutout width

24 3/4" (62.9) Min

Flush Inset

10 1/2" (26.7)

9" (22.9)

Max

ELECTRIC

1 1/2" (3.8)

INSTALLATION CUTOUT

FRONT VIEW

NOTES

Installation Space
The Monogram Beverage
Center may be installed
beneath a countertop or can
be used free-standing.

23 3/4" min.

Standard

Installation

CABINET CABINET

Dim. A

In a standard installation, the
product will project forward of
adjacent cabinets. See Dim. A.

Front Edge of
Product Case

Front Face

110º

120º

24" min. width

stainless steel models

Flush

Installation

Filler panel or cleat to be set
back even with front of case.

CABINET CABINET

These products will fit flush to adjacent
cabinets when installed with a Dim. A - width
filler panel or cleat. The filler panel should be
recessed or set back behind the door and
even with the front edge of the product case.

Front Edge of
Product Case

Front Face

Dim. A

110º

120º

Product Specification Revised 1/18