ZBD1870NSS
GE Monogram® 18" Dishwasher
Dimensions and Installation Information (in Inches)
• The dishwasher must be installed so that the drain hose is
• The dishwasher must be fully enclosed on the top, sides
CLEARANCES:
When installed into a corner, allow 2" min. clearance
between dishwasher and adjacent cabinet,wall or other
appliances. Allow 25-5/8" min. clearance from the front of
the dishwasher for door opening.
no more than 10 feet in length for proper drainage.
and back, and must not support any part of the enclosure.
Countertop
Dishwasher
ZBD1870NSS:
Installation below 34"-high countertops
A reduced-height installation (32-1/2" min.) beneath a
34" countertop can be accomplished by removing the
front leveling legs. The rear legs should be screwed in
flush with the bottom support, as shipped. The front of
the dishwasher must be shimmed to level it. Water and
electrical must be routed through the back wall.
Electrical Requirements
The dishwasher must be supplied with 120V, 60Hz, and
connected to an individual properly grounded branch
circuit protected by a 15- or 20-amp circuit breaker or
time-delay fuse.
25-5/8"
Clearance for Door
Opening 2" Minimum
Installation Information:
Before installing, consult installation instructions packed
with product, or available at Monogram.com, for current
dimensional data.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Specification Revised 2/12
Listed by
Underwriters
Laboratories
150049
ZBD1870NSS
GE Monogram® 18" Dishwasher
Features and Benefits
• Integrated Design - Offers a stainless steel door
and slim tubular handle
• Hidden, Integrated Electronic Controls - Allow
easy activation of wash cycles: heavy wash,
normal wash, light wash, china and rinse only
• Five-Level Wash System - Provides effective, yet
quiet cleaning power
• Pearlescent Gray, Nylon-Coated Racks with
Ball-Tipped Tines - Provide plenty of space and
loading flexibility
• S t e m S a f e
and delicate stemware
• Model ZBD1870NSS – Stainless steel
™
Shelf - Allows for odd-shaped items
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Specification Revised 2/12
Listed by
Underwriters
Laboratories
150049