Monogram MOCTWODW109 Specs
OVERALL DIMENSIONS
ZGU30RSLSSMONOGRAM 30" GAS COOKTOP
SPECIFICATIONS
Overall Width 30" (76.2 cm)
Overall Depth 21" (53.3 cm)
Overall Height 7 7/8" (20.0 cm)*
Cut-out Width 28 1/2" (72.4 cm)
Cut-out Depth 19 5/8" (49.8 cm)
Conduit Length 46 1/2" (118.1 cm)
Volts/Hertz/Amps 120 V AC, 60Hz, 15A
Net Weight 51 lbs. (23 kg)*
Approx. Shipping
Weight
*Including cooking grates, but not including griddle accessory
71 lbs. (32 kg)
3/4"
(1.9)
Cutout
overlap
21"
(53.3)
30" (76.2)
28 1/2" (72.4)
Cutout width
TOP VIEW (SHOWING CUTOUT OVERLAP)
11/16"
(1.7)
Cutout
overlap
19 5/8"
(49.8)
Cutout
depth
Accessory – Cast Iron Griddle:
Achieve even results with this heavy-duty
cast iron griddle, designed to fit over the
left-side grates.
ATTENTION ELECTRICIAN:
A 120V, 60Hz, 15 Amp circuit is required.
An individual properly grounded branch
circuit or circuit breaker is required. Hard
wired junction box is required for
built-in product.
For more details refer to the installation
instructions for this product.
4 1/8"
(10.5)
Including Screw Depth
3/4"
(1.9)
28 7/16" (72.2)
FRONT VIEW
Front of Cooktop
19 7/16" (49.3)
SIDE VIEW
3 11/16"
(9.4)
Including Screw Depth
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
Product Specification Revised 2/18
ZGU30RSLSSMONOGRAM 30" GAS COOKTOP
4 9/16"
(11.6)
18"
(45.7)
min
7/16"
(1.1) min
14 3/4"
(37.5) max
drawer depth
(36" models only)
16"
(40.6) max
36 "(91.4)
Cabinet base
FRONT VIEW
SIDE VIEW
REAR WALL
Gas
supply
line
DRAWER
12"
(30.5)
INSTALLATION
B
E
A
REAR WALL
F
36 "(91.4)
Cabinet base
FRONT VIEW
COUNTERTOP CUT-OUT
DIMENSIONS
TOP VIEW OF CUTOUT
H
28 1/2" (72.4)
Cutout width
FRONT
C
12"
(30.5)
Gas
supply
line
Rear Wall
Non-Combustible
Combustible
18"
(45.7)
Min. Clearance From
Cutout to Rear Wall
Min clearance between the
rear edge of the cutout
and the nearest wall
behind the cooktop
19 5/8" (49.8)
Cutout depth
1 1/2" (3.8) min
Clearance between the
front edge of the cutout
and the front edge of the
min
2 7/8" (6.0)
3 7/8" (8.6)
countertop
NOTES
Wall coverings, countertop and
A
cabinets surrounding cooktop
must be able to withstand
NOTES
temperatures of up to 200ºF.
B
Minimum 30" clearance from
countertop to unprotected
16"
(40.6) max
G
D
7/16"
(1.1) min
4 9/16"
(11.6)
DRAWER
14 3/4"
(37.5) max
drawer depth
(36" models only)
SIDE VIEW
ADA INSTALLATION
5"(12.7)
I
Allow 5"
minimum
depth
between the
countertop
and an
enclosure
SIDE VIEW
overhead surfaces, when no
ventilation hood or microwave
oven is installed.
C
When using a ventilation
hood or microwave oven
above the cooktop, see hood
or microwave installation
instructions for minimum
overhead clearance dimensions.
D
Minimum 18" of clearance
from countertop to nearest
overhead surface on both
sides of cooktop. Make sure to
include any lighting rail covers
in calculation.
E
Minimum 12" distance from
edge of cutout to adjacent side
wall below upper cabinets.
Minimum 12" distance from
F
of countertop to electrical
junction box. Gas supply line
must be 1" distance from rear
wall of cabinet.
Maximum 16" depth of
G
unprotected overhead surfaces,
when no ventilation hood or
microwave oven is installed.
H
Non-Combustible as defined
in the National Fuel Gas
Code (ANSI Z223.1 Current
Edition). Clearances from noncombustible materials are not
part of the ANSI Z21.1 scope
and are not certified by UL.
Clearances less than 3 7/8"
must be approved by local
codes and/or the authority
having jurisdiction.
I
For Americans with Disabilities
Act (ADA) forward approach
installation: Minimum 5"
clearance between the top
of the countertop and the
enclosure. The enclosure must
be made of at least 1/4" thick
wood material, and must have
an access panel installed in
order to provide access to the
junction box and hold-down
brackets, and to allow for
service of the cooktop.
For more details refer to the
installation instructions for this
product.
Dimensions in parentheses are in centimeters unless otherwise noted.
Product Specification Revised 2/18
Loading...