ADA
MONOGRAM 30" BUILT-IN SINGLE OVEN
ZTS90DPSNSS
COMPLIANT
THE MONOGRAM STATEMENT COLLECTION
Edge-to-edge handles, polished sta inless steel, and ha nd-finished
edges convey a sense of solidity a nd beauty
LCD CONTROLS
Allow you to adjust oven settings with little effort
WIFI CONNECT
Perfectly in sync with a busy lifestyle, Alexa or Google Home can
be used to control an a rray of oven functions from both inside
and outside the home
PRECISION COOKING MODES
Master new recipes and perfectly execute favorite dishes using
this ultra-smart system tha t automa tically tracks cooking progress,
modifies temperatures a nd adjusts cook times
SCAN-TO-COOK
Innovative a nd time saving, scan-to-cook technology ensures tha t
packaged foods are always prepa red correctly. A simple scan of the
barcode with a smartphone delivers consistently, delicious results
TRUE EUROPEAN CONVECTION WITH DIRECT AIR
Channels hea ted air from the top of the oven a nd circulates it
around food on all sides for perfectly uniform baking a nd roasting
5.0 CUBIC FOOT CAPACITY
Easily accommodates even the la rgest meals
EXCLUSIVE SELF-CLEAN, (1 FULL-EXTENSION,
2 REGULAR) OVEN RACKS
Glide in and out smoothly on sta inless steel ball bearings, a nd
are designed to be left in the oven during the self-clea n cycle
TEN-PASS BAKE ELEMENT
Covers more surface area for more even baking results
EIGHT-PASS BROIL ELEMENT
Provides complete coverage and even browning, even for
large dishes
SELF-CLEAN WITH STEAM CLEAN OPTION
Gives you flexible options for thorough oven cleaning
For questions about your
appliance, please call 1-800-626-2000.
PAGE 1 OF 4
Product Specication Created 10/19
OVERALL DIMENSIONS
ZET9050SHSS
29 3/4" (75.6)
28 1/2" (72.4)
1"
(2.5)
min cutout width
5 1/4"
(13.3)
SPECIFICATIONS
Overall Width 29 3/4" (75.6 cm)
Overall Height 28 11/16" (728 cm)
Overall Depth Including Handle 27 5/16" (70.6 cm)
Oven Door Clearance 20 9/16" (52.2 cm)
Overall Oven Interior Capacity 5.0 cu. ft. (141.6 liters)
Oven Interior Dimensions
(W x H x D)
Minimum Cabinet Width* 30" (76.2 cm)
Minimum Cabinet Depth* 24" (61.0 cm)
Minimum Base Support 220 lbs. (99 kg)
Cutout Width*
Cutout Height*
Cutout Depth* 23 1/2" (59.7 cm) Min
Volts/Hertz/Amps 240/208 V AC, 60 Hz, 20A
Conduit Length
25" x 17 3/8" x 20 1/4"
(63.5 x 44.1 x 51.4 cm)
28 1/2" (72.4 cm) Min
28 5/8" (72.7 cm) Max
27 1/4" (69.2 cm) Min
27 5/16" (69.4 cm) Max
48" (72" available special
order: WB18T10398)
27 1/4"
min cutout
7/16"
(1.1)
(69.2)
height
25 3/4" (65.4)
15 1/4"
(38.7)
FRONT VIEW (SHOWING CUTOUT OVERLAP)
24 3/4" (62.8)
1 7/16" (3.6)
28 11/16"
(72.8)
6 3/8"
(16.2)
14 15/16"
(38.1)
8 3/8"
(21.4)
SIDE VIEW
5/8"
(1.7)
27 5/16"
(69.3)
28 1/2" (72 .4)
10 1/2"
(26.6)
5 1/8"
(13.0)
1 7/8"
(4.7)
5/8"
(1.7)
8 3/8"
(21.4)
23 1/8"
(58.7)
3 1/2"
(8.8)
Electrical Rating
3.4 kW at 208V
4.5 kW at 240V
Shipping Weight 184 lbs. (84 kg)
* Additional space will be needed for ush installation.
ATTENTION ELECTRICIAN:
A 240/208V, 60Hz, 20 Amp circuit is required. An individual
properly grounded branch circuit or circuit breaker is required.
Hardware junction box is required for built-in product.
For questions about your
appliance, please call 1-800-626-2000.
2 9/16"
(6.5)
SHOWING DOOR CLEARANCE
TOP VIEW
OPEN OVEN DOOR
20 9/16"
(52.2)
min
Dimensions in parentheses a re in centimeters unless otherwise noted.
Actual product dimensions may vary due to ma nufacturing tolerances.
Product Specication Created 10/19PAGE 2 OF 4
30" (76.2) flush inset width
with
1/8" (0.3) reveals
30" (76.2)
1 7/16"
(3.6)
27 1/4"
(69.2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
Side cleat
Top cleat
Bottom cleat
5 1/4"
(13.3)
9 1/2"
(24.1)
28 1/2" (72.4)
cutout width
3/4"
(1.9)
Side cleats
1 1/8"
(2.8)
Top cleat
9/16" (1.4)
Bottom cleat
(Extends full depth of cabinet)
28 15/16"
(73.5)
Flush inset
height with
1/8" (0.3)
reveal at top
and bottom
24 15/16" (63.3)
cutout depth
23 1/2"
(59.7)
min cutout depth
2 1/2"
(6.4)
Side cleats
depth
TOP VIEW
STANDARD
INSTALLATION
FLUSH INSET
INSTALLATION
FLUSH INSET INSTALLATION
FRONT VIEW
ZET9050SHSS
ELEC.
ZET9050SHSS
WALL INSTALLATION
(59.7)
27 1/4"
(69.2)
32 1/2"
(82.6)
Recommended
cutout
location
from floor
A
23 1/2"
min cutout depth
C
24 15/16" (63.3)
cutout depth
Top cleat
Side cleat
Bottom cleat
D
Allow 1/8" (0.3 cm) clearances from side edges of oven door.
1 7/16"
(3.6)
30" (76.2) flush inset width
with
1 1/8"
(2.8)
Top cleat
28 15/16"
(73.5)
Flush inset
height with
1/8" (0.3)
reveal at top
and bottom
F
3/4"
(1.9)
Side cleats
9/16" (1.4)
Bottom cleat
(Extends full depth of cabinet)
TOP VIEW
E
1/8" (0.3) reveals
5 1/4"
(13.3)
28 1/2" (72.4)
cutout width
30" (76.2)
2 1/2"
(6.4)
Side cleats
depth
B
ELEC.
9 1/2"
(24.1)
HELPFUL TIPS
A
Based on a user height
of 5' 6" to 5' 10"
B
Junction box location (May
also be located in adjacent
cabinet.)
C
Platform must be a ble to
support 220 lbs (99 kg)
D
Cabinet surfaces must be a n
appeara nce finished surface
for flush installation.
E
Cleats may be visible a nd
should be finished to match
cabinetry.
F
If using optional flush
install vent trim accessory
ZX30VT1, please adjust
cutout height to 28-5/8”
CC
and bottom cleat height
to 1/4".
G
Minimum 31 1/4" from
the top surface of the
countertop to the top
surface of the wall oven
support platform when
installed beneath a certified
cooktop.
UNDERCOUNTER INSTALLATION
B
3
31 1/4"
(79.4) min
27 1/4"
G
(69.2)
23 1/2"
(59.7) min cutout depth
3/4" thick
platform
required
STANDARD
INSTALLATION
(7.6)
3/4"
(1.9)
STANDARD INSTALLATION
5 1/4"
(13.3)
28 1/2" (72.4)
min cutout width
ELEC.
9 1/2"
(24.1)
C
FRONT VIEW
For more details, refer to the installa tion instructions for this product on Monogram.com.
Dimensions in parentheses a re in centimeters unless otherwise noted.
For questions about your
appliance, please call 1-800-626-2000.
24 15/16"
(63.3)
cutout depth
FLUSH INSET
INSTALLATION
Product Specication Created 10/19PAGE 3 OF 4
2" (5.1) min
2 1/2"
(6.4) min
2"
(5.1) min
ZET9050SHSS
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
STANDARD INSTALLATION
SIDE VIEW
ELEC. ELEC.
2"
INSTALLATION WITH ADVANTIUM
2" (5.1) min
ZET9050SHSS
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
ELEC. ELEC.
AND WARMING DRAWER
A
2 1/2"
(6.4) min
2"
(5.1) min
B
STANDARD INSTALLATION
SIDE VIEW
UNDER COOKTOP INSTALLATION
H
C
SIDE BY SIDE INSTALLATION
SIDE-BY-SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
I
(5.1) min
ELEC. ELEC.
C
L
J
GAS
HELPFUL TIPS
Dimensions per Advantium or
A
Microwave Oven requirements
Dimension per Warming Drawer
B
requirements
Note this oven is only approved to
C
be installed under specific models
as labeled on this unit.
Support platform made of 3/4"
D
(1.9 cm) wood is required. Must
be capable of supporting 220 lbs
(99 kg). Support Platform base to
be same height as toe kick.
Junction box location for wall oven.
E
(May also be located in adjacent
cabinet).
Gas regulator a nd electric
F
connections for cooktops must be
located in a n adjacent accessible
location to the right
Top and/or side fillers may be
G
necessary if unit is positioned
between existing cabinets. Be sure
they are a ttached securely, since they
will anchor the oven in the ca binet.
For flush oven installations, the
H
cooktop cutout must be set back
2 1/2" (6.4 cm) plus the cleat setback.
ELEC.
D
Wall oven
2 7/8"
(7.4) max
Junction box
can protrude
from back wall
of installation
(Not cabinet wall)
31 1/4"
(79.4)
27 1/4"
L
(69.2)
3/4" thick platform
required
GAS
STANDARD INSTALLATION
SIDE VIEW
For more details, refer to the installa tion instructions for this product on Monogram.com.
Dimensions in parentheses a re in centimeters unless otherwise noted.
For questions about your
appliance, please call 1-800-626-2000.
E
FRONT VIEW
ELEC.
Wall oven
F
G
Cooktop
Dimension varies based on model.
K
I
exa mple:
ZGU36 5 1/2" (14.0 cm) (from wall)
ZGU30 4 5/16" (11.0 cm) (from wall)
Dimension varies based on model.
J
example:
ZGU36 0" (centerline)
ZGU30 12 1/16" (30.6 cm) (centerline)
Dimension varies based on model
K
ZGU36: 5 1/2" (13.9 cm) requires
use of a 90°1/2" FPT x 1/2" FL brass
street elbow ZGU30: 5" (12.7 cm)
From the top surface of the
L
countertop to the top surface of
the wall oven support platform
Product Specication Created 10/19PAGE 4 OF 4
Loading...