Monnit Ethernet Gateway, Ethernet Sensors Quick Start Manual

TM

by

The Leading Enterprise Internet of Things Solution

Quick Start Guide - Ethernet Gateway and Sensors

Simple Setup

1.

Create an online sensor monitoring account
at www.imonnit.com.

2.

Follow the on-screen instructions to add
devices to your account.

4.

Insert batteries or use switch to power the
wireless sensors on.

5.

View your sensor data from your online
account or mobile app, and customize
sensor settings.

Wall

Outlet

3.

Connect the wireless gateway to an Internet
router and power supply (all lights should
turn green).

Power

DC 5V

Reset

Internet RouterPower Supply Antenna

Ethernet

Antenna

Alert!
Temperature is
48*F. 11:35 PM

6.

Create notications for things you want to
know about.

The Basics

Monnit Ethernet Gateway Lights

Sent From - Select devices (sensors and gateways) that
will cause the notication to be sent.

Network

Internet
Servers

Sensor

Data

Local sensor network: communication problem

Local sensor network: communication is OK

(Blinking) Sensor communication in progress

Last server communication was unsuccessful

Last server communication was successful

(Blinking) Server communication in progress

No Internet connection found

Internet connection successful

Service

Note: If the lights do not turn green view the Ethernet gateway

troubleshooting guide at, http://www.monnit.com/support/.

Sensor Settings

From the overview page click on a sensor row to access
detailed information. Click the “Settings” tab to change
the sensor settings.

Actions - Click the Action tab to select how they will
recieve the alert.
(green is on, grey is off).

All notications will show in the list after they are created.

For more detailed instructions, documentation,
“how-to” guides and video demonstrations on using
Monnit wireless sensors, wireless gateways and
iMonnit software, visit our support page at

http://www.monnit.com/support/.

Note: Changes made to a sensor’s settings will be applied on the

next sensor heartbeat (check-in). Additional changes can not be
made until the sensor has applied the previous changes. To force
sensor communication, power cycle the sensor by removing the
battery, waiting 30 seconds, then reinserting the battery.

Sensor Events

Click “Events” in the main menu. Click “Add Event” then
choose the type you want to create.

Types of Notications

Sensor Reading - Alert based on sensor reading or activity.
Battery - Alert based on battery power remaining.
Device Inactivity - Alert when a sensor has not checked in.

Trigger Conditions - Set conditions that trigger the
notication.

Monnit Corporation
3400 South West Temple
South Salt Lake, UT 84115
801-561-5555
www.monnit.com

Monnit, Monnit Logo, ALTA, MonnitLink and iMonnit are trademarks of Monnit, Corp.

© 2009-2017 Monnit Corp. All Rights Reserved.

AQS-001-1A (07/17)