Page 1
CONTENTS
Speaker Mount
Installation Instructions
Mark fixing points of wall plate and
1
drill holes.
Size will be depend on fixing method and you should
refer to the appropriate manufacturers instructions.
If you are unsure of being able to provide a secure fixing
seek the advise of a professional installer.
Fixing Dial
Wall Plate
NOTE: No fixings are supplied.
Please use the appropriate fixings dependant
on the wall structure.
2
Fix wall plate to wall
Ceiling
Arm
Wall Arm
Locking
Nut
3
Fit locking nut onto either the
wall mount or ceiling mount arms
(depending on application).
Page 2
4
Slide the fixing dial over the threaded
part of the arm and fix the arm to
the cabinet turning it clockwise.
5
Offer the cabinet and bracket
assembly up to the wall plate
and start to tighten the fixing dial
supporting the weight of the cabinet.
Do not completely tighten.
6
Ensure the cabinet is in the desired
angle and fully tighten the Fixing
Dial.
Extra purchase can be achieved by using a spanner on
the Fixing Dial.
If further adjustment is required, loosen the Fixing Dial
before adjusting.
This Universal Speaker Mount from Monitor Audio uses
a 1/4” UNC thread and can be used with any of our
speakers with the 1/4” UNC threaded insert.
The Maximum weight the bracket can hold is 4Kg.
Monitor Audio Ltd
24 Brook Road, Rayleigh
Essex, SS6 7XJ
England
Tel: + 44 (0)1268 740580
Fax: + 44 (0)1268 740589
Email: info@monitoraudio.co.uk
Designed in the United Kingdom
Loading...