100 - 200 - 300 Series
In-Ceiling & In-Wall Trimless Speakers
High Performance
Architecture
Monitor Audio’s in-wall and in-ceiling speakers
are engineered for high performance, reliability and
ease-of-use. They’ve been developed using the
advanced driver technologies of our award-winning
hi- speaker ranges to deliver world-famous sound
quality without compromising room design.
Available across four performance levels,
Monitor Audio’s architectural speakers bring
innovation to every application - wherever you
decide to experience dynamic music and lm
sound, there’s an in-wall or in-ceiling speaker
that’s perfect for the role, expertly optimised
for rhythmic wideband audio, seamless room
integration and easy, secure installation.
If you love your décor and appreciate
great audio, you needn’t compromise:
Monitor Audio’s architectural speakers will
create harmony all around your home.
monitoraudio.com
Performance guide
To achieve a harmony of space and sound for every possible application, we’ve built a wide range of in-wall
and in-ceiling options across four performance levels: good/better/best/agship, all featuring our core speaker
technologies and as always, our renowned design and construction quality.
Good: 100 Series 2-way Loudspeakers
All 100 Series loudspeakers incorporate the
proprietary technologies and materials found in our
award-winning Radius HD. 100 Series models are
2-way designs that combine advanced MMP
bass drivers with Monitor Audio’s trademark
®
C-CAM
performance sound, ease-of-drive, and wide
frequency response and dispersion. Optimum
imaging and set-up are established via a pivoting
tweeter and high-frequency (+3dB / 0dB /-3dB)
level adjustment.
gold dome tweeter to provide high
®
II
Better: 200 Series 2-way Loudspeakers
The step to the 200 Series 2-way loudspeakers
is dened by upgrades in driver technology and
control features. All 200 Series loudspeakers
incorporate the proprietary technologies and
materials found in our highly acclaimed Silver RX
series in-room loudspeakers, and in our Award
winning Bronze BX range and in the Climate all-
weather speakers. 200 Series models marry C-CAM
bass drivers with a more highly specied version of
the C-CAM gold dome tweeter. Optimum imaging
and set-up are established via a pivoting tweeter,
high frequency (+3dB / 0dB / -3dB) level adjustment,
and boundary compensation (on / off) controls.
The 200 Series 2-way loudspeakers provide an
extended high-frequency response to 30kHz, and
higher output and power handling capacity than
the 100 Series 2-way models.
Best: 200 Series 3-way Loudspeakers
with IDC
200 Series 3-way loudspeakers feature our unique
Inverted Dual Concentric (IDC) driver module.
The IDC driver module houses a 4-inch C-CAM
midrange and 1-inch C-CAM gold dome tweeter.
200 Series 3-way models combine C-CAM bass
drivers with an IDC driver module to provide rich
midrange detail, higher system output, greater
power handling, and superior vocal intelligibility
and sound localisation than 200 Series 2-way
models. Optimum imaging and set-up are
established via the pivoting IDC, high frequency
(+3dB /0dB / -3dB) level adjustment, and
boundary compensation (on / off) controls.
®
Flagship: 300 Series 3-way
Loudspeakers with IDC
Our agship 300 Series 3-way loudspeakers
provide the best Monitor Audio in-wall and
in-ceiling loudspeaker options for music and
home theatre applications. All 300 Series
loudspeakers incorporate proprietary technologies
and materials found in our award-winning Apex,
Silver RX and Gold Signature ranges.
300 Series 3-way models marry C-CAM bass drivers
with Rigid Surface Technology (RST
and a cast-aluminium driver chassis with an IDC
driver module to provide deeper bass, higher system
output, and greater power handling than the 200
Series 3-way models.
®
®
) cone proles
Like the 200 Series 3-way loudspeakers, 300 Series
models provide rich midrange detail, and superior vocal
intelligibility and sound localisation. Optimum imaging
and set-up are established via the pivoting IDC, high-
frequency (+3dB / 0dB / -3dB) level adjustment, and
boundary compensation (on / off) controls.
The WT380-IDC in-wall loudspeaker adds a
midrange-frequency level adjustment for system
tuning and a die-cast aluminium front bafe for added
rigidity, resulting in superior bass articulation.
FX Surround Loudspeakers
The FX Surround loudspeaker models feature
selectable dipole (diffuse sound) or bipole
(direct sound) modes for use as rear surround
speakers in discreet home theatre applications.
Both models utilise a front-mounted switch, to change
the surround mode. The CT380-FX features a 12-volt
trigger input for automatic surround mode switching.
The CT265-FX and CT380-FX models use dual 1-inch
C-CAM gold dome tweeters mounted at a precise
xed-angle for optimised performance. The CT265-FX
has a 6.5-inch C-CAM bass driver. The CT380-FX has
an 8-inch C-CAM bass driver with RST cone prole
and a cast aluminium driver chassis.
T2 Stereo Loudspeakers
Our T2 Stereo models feature dual, independent,
pivoting 1-inch C-CAM tweeters, and 6.5 inch
(CT165-T2) or 8-inch (CT180-T2) Metal Matrix
Polymer (MMP
high performance stereo sound from a single speaker.
The T2 models are ideal for bathrooms, hallways, or any
area where space does not allow for stereo pairs.
®
II) dual wound voice coil bass drivers for
Performance at a glance
CT180 In-Ceiling 2-Way
CT280 In-Ceiling 2-Way
CT280-IDC In-Ceiling 3-Way
8˝ In-Ceiling
6.5˝ In-Ceiling
8˝ In-Wall
6.5˝ In-Wall
CT380-IDC In-Ceiling 3-Way
CT380-FX In-Ceiling Surrounds
CT180-T2 In-Ceiling Stereo
CT165 In-Ceiling 2-Way
CT265 In-Ceiling 2-Way
CT265-IDC In-Ceiling 3-Way
CT265-FX In-Ceiling Surrounds
CT165-T2 In-Ceiling Stereo
WT180 In-Wall 2-Way
WT280 In-Wall 2-Way
WT280-IDC In-Wall 3-Way
WT380-IDC In-Wall 3-Way
WT165 In-Wall 2-Way
WT265 In-Wall 2-Way
GOOD
•
•
•
•
BETTER
•
•
•
•
BEST
•
•
•
FLAGSHIP
•
•
FX SURROUND
T2 STEREO
•
•
•
•
monitoraudio.com
Technology guide
Features
‘Trimless’ Grilles
All speakers feature near invisible, easy-to-install
‘trimless’ grilles. The grilles attach magnetically to
the speaker frame, allowing removal and re-xing in
seconds. Their stealthy appearance favours discreet,
décor-friendly installation.
Patented Tri-Grip® Fixing Clamps
The Tri-Grip mounting clamps feature three clamping
points per dogleg, providing three times the clamping
surface area of conventional single-point clamping
speakers. Our wider three-point clamps provide a
better seal between the speaker and the ceiling,
maximising bass response and midrange clarity.
Easy Handling during Installation
All models feature protective crossover covers
designed to prevent the ingress of loose building
materials and dust into the drivers and crossover.
The protective covers also make handling easy,
and protect the crossover components from
damage during installation.
Ready for Action in
Humid Environments
All models will resist high humidity and
ultraviolet light and can be placed in
bathrooms and pool areas.
Adjustable Response Controls
Optimum imaging and set-up are established
via pivoting tweeters, pivoting IDC driver
modules, high-frequency, midrange-frequency,
and/or boundary compensation controls
(depending on model). The boundary
compensation control provides a gentle
midrange roll-off response while preserving
extreme low frequency output when the speaker
is placed close to ceiling and wall boundaries.
New Construction Brackets
New construction brackets are available for all
models as an accessory to help mark speaker
placement during framing and prior to sheetrock
application. The brackets will span up to 24-inch
stud spacing. New construction brackets are not
required for retrot applications.
Painting
To achieve seamless decor integration, the
trimless grilles can be painted. A replacement
scrim is included to ensure the stealthy presence
of the speaker is maintained after painting.
Technology
MMP®II
MMP®II (Metal Matrix Polymer) driver cones have a
polypropylene base loaded with metallic particles
for a rigid and responsive structure. A high pressure,
injection-moulded process achieves a different cone
thickness at critical points to optimise stiffness and
consistency, resulting in superior sonic performance.
C-CAM
C-CAM (Ceramic-Coated Aluminium Magnesium) is
an innovative alloy material originally developed by
the aerospace industry for use in the construction
of jet engine blades where low mass and extreme
rigidity are required. Monitor Audio C-CAM driver
cones are formed from an alloy of aluminium and
magnesium, which is shaped by a two-stage high
pressure forming technique. After forming, a layer of
pure ceramic (alumina) is depleted onto the surfaces
to give a completely rigid exterior. The resulting
properties are lightning-fast response for incredible
clarity and extreme rigidity for low distortion.
RST
The dimpled surface of C-CAM drivers with the RST
cone prole provides the driver surfaces with a greater
degree of resistance to mechanical bending forces.
The dimples signicantly increase cone rigidity and
allow us to use thinner and therefore lighter C-CAM
cones. The dimpled RST pattern also displaces any
standing waves that can propagate across the cone
surface. C-CAM drivers with the RST cone prole
provide speed and accuracy, while virtually eliminating
the distortion caused by cone-ex during operation.
®
®
Technology
at a glance
100 Series
200 Series
300 Series
C-CAM Tweeter
• •
• •
• • •
MMP II Woofer
C-CAM Woofer
RST Technology
monitoraudio.com
Inverted Dual Concentric Driver module Inverted Dual Concentric Driver module
For the in-ceiling and in-wall IDC models
Trimless grilles.
For the perfect blend with
any decor, all grilles are
paintable: additional scrim
material is provided.
Typical 2-Way Speakers
Our ‘IDC’ models are the best choice as front speakers in theatre
and music applications.
Two of the most important qualities for the reproduction of movies and music
from front speakers are vocal band intelligibility and front sound localisation.
1˝ C-CAM® Tweeter
Highfrequency
control
Boundary
Compensation
control
Vocal-band information
(250Hz to 30KHz) is produced
by the pivoting IDC® midrange/
tweeter driver module
Magnetic grille xing.
Ultra-powerful Neodymium
magnets hold the speaker
grilles in place, allowing
for easier installation
and access.
Low-frequency information
radiates from the woofer
The in-ceiling and in-wall IDC models feature a unique Inverted Dual
Concentric (IDC) pivoting midrange/tweeter module with up to 18 degrees
of adjustment in all directions. Speakers can be discreetly positioned, and the
sound directed toward the desired listening area by pivoting the IDC driver module
for maximum performance. These models are true 3-way designs offering superior
performance and exibility over typical 2-way or xed angle speaker designs.
®
Monitor Audio IDC
Monitor Audio’s innovative IDC driver module is proprietary. Its inverted 4” midrange
driver provides superior dispersion, while enabling the midrange cone and tweeter
dome to be set as far forward as possible. This conguration allows for the clear
acoustic ‘sighting’ of the desired listening area and reduces undesirable diffraction
effects. It’s impossible to avoid the diffraction of critical vocal band frequencies in
two-way designs, where the bass driver is set 3” to 6” back from the speaker grille.
Speaker
4˝ Inverted C-CAM
®
midrange with
®
RST
cone prole
Midrange Neo magnet structure
with 1.5˝ voice coil
Vocal Band Intelligibility
The ability to hear every sound clearly and without strain is difcult when dialogue
is competing with the lm score and loud sound effects such as explosions and
collisions. When you can’t hear the dialogue clearly, it’s difcult to understand the
movie plot or in the case of music, to appreciate what the vocalist is singing.
Front Sound Localisation
The ability to match the sound of on-screen action with the image is critical to the
success of any lm performance. For example, if a car travels from left to right on
the screen, the scene only becomes believable if the sound pans with the action.
Likewise with music: an accurate “stereo image” of the band, which places all
instruments properly in space, will add realism to your listening experience.
Pivoting housing and
midrange chassis
Tweeter Neo magnet structure
Superior Clarity and Imaging
The IDC driver module houses a 4-inch C-CAM midrange and 1-inch C-CAM
dome tweeter, covering the response from 250Hz to 30kHz.
We selected a 4-inch midrange driver so that a wider range of directional
frequencies - which are critical to vocal band intelligibility and accurate sound
localisation - can radiate without diffraction from the IDC driver module.
High Power Handling and Output
The 4-inch midrange driver utilises an over-sized 1.5-inch edge-wound voice
coil. Separate tweeter and midrange Neodymium magnet systems provide high
overall power handling and efciency. The IDC driver module operates within its
own sealed chamber to provide accurate damping and perfect acoustic alignment.
monitoraudio.com
8˝ Full Range Speakers 8˝ Special Application Speakers
Good Better Best Flagship T2 Stereo FX Surrounds
6.5˝ Full Range Speakers 6.5˝ Special Application Speakers
Good Better Best T2 Stereo FX Surrounds
8˝ In-Ceiling
speakers
Frequency Response
Impedance
Sensitivity (1W@1m)
Maximum SPL
Power Handling (RMS)
Recommended Amp Requirements
Drive Unit Complement
Adjustment Controls
Overall Diameter
(Including grille)
Overall Depth (Including grille)
Cut Out Diameter
Mounting Depth
Fixing Type
Construction Material
Pre-Construction Bracket
Weight
CT180 CT280 CT280-IDC CT380-IDC CT180-T2 CT380-FX
50Hz - 25kHz 50Hz - 30kHz 50Hz - 30kHz 45Hz - 30kHz 50Hz - 25kHz 45Hz - 30kHz
6 ohms 6 ohms 6 ohms 6 ohms 6 ohms 6 ohms
90dB 90dB 90dB 90dB 90dB 90dB
111.6dBA 111.6dBA 111.6dBA 112dBA 111.6dBA 111.6dBA
120 W 120 W 120W 150 W 120 W 120 W
30 - 120W 30 - 120W 30 - 120W 40 - 150W 30 - 120W 30 - 120W
2- Way
®
II cone
8˝ MMP
bass driver
®
1˝ C-CAM
gold dome tweeter
pivoting
HF Level Switch
(+3dB/ 0dB/ -3dB)
1/4˝
(285mm) 11
11
15/16˝
4
(125mm) 4
3/4
˝ (247mm) 9
9
3/4
˝ (121mm) 4
4
2-Way
8˝ C-CAM® cone
bass driver
1˝ C-CAM® pivoting
gold dome tweeter
1/4
˝ (285mm) 11
15/16
˝ (125mm) 6
3/4
˝ (247mm) 9
3/4
˝ (121mm) 6
3-Way
8˝ C-CAM® cone bass
driver, pivoting IDC
module housing:
®
4˝ C-CAM
RST® inverted
mid range driver
1˝ C-CAM
gold dome tweeter
®
pivoting IDC module housing:
HF Level Switch (+3dB/ 0dB/ -3dB)
Boundary Compensation Switch
1/4
˝ (285mm) 11
5/16
˝ (160mm) 6
3/4˝
(247mm) 9
1/8˝
(156mm) 6
3 Position Tri-Grip
3-Way
8˝ C-CAM
®
cone bass
driver featuring RST
®
4˝ C-CAM
RST® inverted
mid range driver
1˝ C-CAM
gold dome tweeter
1/4
˝ (285mm) 11
5/16
˝ (160mm) 4
3/4
˝ (247mm) 9
1/8˝
(156mm) 4
®
Dog Leg Fixings
®
®
Mineral Filled ABS Plastic (UL V0 Fire Retardent, RoHS2 Compliant)
CB8 (Green)
6lb (2.72kg) 6lb 2oz (2.8kg) 7lb 8oz (3.42kg) 8lb (3.64kg) 6lb 10oz (3kg) 7lb (3.2kg)
CB8 construction bracket ts all
8˝ In-ceiling speakers
2-Way
®
8˝ MMP
II cone
bass driver
2 x 1˝ C-CAM®
pivoting gold dome
tweeters
HF Level Switch
(+3dB/ 0dB/ -3dB)
1/4
˝ (285mm) 11
15/16
˝ (125mm) 6
3/4
˝ (247mm) 9
3/4
˝ (121mm) 6
bass driver featuring RST
2 x 1˝ C-CAM
HF Level Switch (+3dB/ 0dB/ -3dB)
Bi pole/ Di pole Switch with
Additional 12v Trigger Switching
2-Way
8˝ C-CAM® cone
®
xed angle
gold dome tweeters
1/4
˝ (285mm)
5/16
˝ (160mm)
3/4
˝ (247mm)
1/8˝
(156mm)
CT165 CT265 CT265-IDC CT165-T2 CT265-FX
6.5˝ In-Ceiling
speakers
Frequency Response
Impedance
Sensitivity (1W@1m)
Maximum SPL
Power Handling (RMS)
Recommended Amp Requirements
Drive Unit Complement
®
Adjustment Controls
Overall Diameter
(Including grille)
Overall Depth (Including grille)
Cut Out Diameter
Mounting Depth
Fixing Type
Construction Material
Pre-Construction Bracket
Weight
CB6 construction bracket ts all
6.5˝ In-ceiling speakers
60Hz - 25kHz 60Hz - 30kHz 60Hz - 30kHz 60Hz - 25kHz 60Hz - 30kHz
6 ohms 6 ohms 6 ohms 6+6 ohms 6 ohms
88.5dB 88.5dB 88.5dB 88.5dB 88.5dB
107.4dBA 108dBA 108dBA 107.9dBA 108dBA
65W 75W 85W 65W 85W
20 - 65W 20 - 75W 20 - 85W 20 - 65 W 20 - 85W
2-Way
®
6.5˝ MMP
II
cone bass driver
1˝ C-CAM® pivoting,
gold dome tweeter
HF Level Switch
(+3dB/ 0dB/ -3dB)
13/16
9
˝ (250mm) 9
5/8
4
˝ (118mm) 4
1/4
˝ (211mm) 8
8
1/2
˝ (114mm) 4
4
2-Way
6.5˝ C-CAM®
cone bass driver
6.5˝ C-CAM
pivoting IDC module housing:
1˝ C-CAM® pivoting,
gold dome tweeter
HF Level Switch (+3dB/ 0dB/ -3dB)
Boundary Compensation Switch
13/16
˝ (250mm) 9
5/8
˝ (118mm) 6˝ (153mm) 4
1/4
˝ (211mm) 8
1/2
˝ (114mm) 5
3 Position Tri-Grip
3-Way
®
cone bass driver,
®
4˝ C-CAM
RST® inverted
mid range driver
®
1˝ C-CAM
gold dome tweeter
13/16
1/4
7/8
˝ (250mm) 9
˝ (211mm) 8
˝ (149mm) 4
®
Dog Leg Fixings
2-Way
®
6.5˝ MMP
II cone
bass driver
2 x 1˝ C-CAM® pivoting
gold dome tweeters
HF Level Switch (+3dB/ 0dB/ -3dB)
-
13/16
˝ (250mm) 9
5/8
˝ (118mm) 6˝ (153mm)
1/4
˝ (211mm) 8
1/2
˝ (114mm) 5
2-Way
6.5˝ C-CAM®
cone bass driver
2 x 1˝ C-CAM® xed
angle gold dome tweeters
Bi pole/ Di pole Switch
13/16
˝ (250mm)
1/4
˝ (211mm)
7/8
˝ (149mm)
Mineral Filled ABS Plastic (UL V0 Fire Retardent, RoHS2 Compliant)
CB6 (Purple)
4lb 4oz (1.92kg) 4lb 8oz (2.04kg) 6lb 10oz (2.54kg) 4lb 10oz (2.08kg) 4lb 10oz (2.08kg)
monitoraudio.com
8˝ and 6.5˝
In-Wall
speakers
8˝ Full Range Speakers 6.5˝ Full Range Speakers
Good Better Best Flagship Good Better
WT180 WT280 WT280-IDC WT380-IDC WT165 WT265
In-Wall Speakers
G
A
A
D
C
F
Frequency Response
Impedance
Sensitivity (1W@1m)
Maximum SPL
Power Handling (RMS)
Recommended Amp Requirements
Drive Unit Complement
Adjustment Controls
Overall Dimensions
(Including Grille)
Overall Depth (Including grille)
Cut Out Dimensions
Mounting Depth
Fixing Type
Construction Material
Pre-Construction Bracket
Weight
50Hz - 25kHz 45Hz - 30kHz 45Hz - 30kHz 45Hz - 30kHz 60Hz - 25kHz 55Hz -30kHz
6 ohms 6 ohms 6 ohms 6 ohms 6 ohms 6 ohms
90dB 90dB 90dB 90dB 88.5dB 88.5dB
111.6dBA 111.6dBA 111.6dBA 112dBA 107.4dBA 107.4dBA
120 W 120 W 150 W 120W 65 W 65 W
30 - 120W 30 - 120W 40 - 150W 30 - 120W 20 - 65W 20 - 65W
2-Way
®
II cone
8˝ MMP
bass driver
1˝ C-CAM® pivoting
gold dome tweeter
HF Level Switch
(+3dB/ 0dB/ -3dB)
3/8˝
5/16˝
x 11
3/16
˝
17
(441 x 288mm)
13/16˝
(97.5mm) 3
3
1/4
˝ x 9
15
(387 x 234mm)
11/16
3
˝ (93mm) 3
6lb 12oz (3.08kg) 6lb 14oz (3.1kg) 7lb 14oz (3.6kg) 9lb (4.1kg) 4lb 14oz (2.21kg) 5lb (2.26kg)
2-Way
8˝ C-CAM® cone
bass driver
1˝ C-CAM® pivoting
gold dome tweeter
HF Level Switch (+3dB/ 0dB/ -3dB)
Boundary Compensation Switch
3/8˝
17
x 11
(441 x 288mm)
13/16
˝ (97.5mm) 3
1/4
15
(387 x 234mm)
3/16
˝ x 9
11/16
˝ (93mm) 3
cone bass driver, pivoting
5/16
˝
˝
3-Way
8˝ C-CAM
IDC module housing:
4˝ C-CAM
mid range driver
1˝ C-CAM
gold dome tweeter
17
(441 x 288mm)
13/16
15
(387 x 234mm)
11/16
Mineral Filled ABS Plastic (UL V0 Fire Retardent, RoHS Compliant)
WB8 (Green) WB6 (Purple)
®
®
RST® inverted
®
3/8˝
5/16
x 11
˝
˝ (97.5mm) 4˝ (101.5mm) 3
1/4
3/16
˝ x 9
˝
˝ (93mm) 3
6 Position Tri-Grip
cone bass driver featuring RST
pivoting IDC module housing:
HF Level Switch (+3dB/ 0dB/ -3dB)
MF Level Switch (+3dB/ 0dB/ -3dB)
Boundary Compensation Switch
3-Way
8˝ C-CAM
®
4˝ C-CAM
RST® inverted
mid range driver
1˝ C-CAM
gold dome tweeter
3/8
17
˝ x 11
(441 x 288mm)
1/4
15
˝ x 9
(387 x 234mm)
13/16
˝ (97.5mm) 3
®
Dog Leg Fixings
3/16
®
®
5/16
2-Way
®
6.5˝ MMP
1˝ C-CAM® pivoting
gold dome tweeter
(+3dB/ 0dB/ -3dB)
˝
˝
®
II cone
bass driver
HF Level Switch
9/16
14
(370 x 250mm)
13
(332 x 213mm)
13/16
˝ x 9
˝
1/2
˝ (89.5mm) 3
1/16
3/8
˝ x 8
˝
3/8
˝ (85.5mm) 3
Boundary Compensation Switch
2-Way
6.5˝ C-CAM® cone
bass driver
1˝ C-CAM® pivoting
gold dome tweeter
HF Level Switch
(+3dB/ 0dB/ -3dB)
9/16
14
˝ x 9
(370 x 250mm)
1/2
˝ (89.5mm)
1/16
13
˝ x 8
(332 x 213mm)
3/8
˝ (85.5mm)
13/16
3/8
F
B
B
C
E
E
D
˝
WT380-IDC Front
˝
Pivoting IDC® Midrange/Tweeter Driver Module
A
High-Frequency Control
B
Midrange-Frequency Control
C
D
8˝ C-CAM® Woofer with RST® Cone Prole
Rigid Cast-Aluminum Front Bafe
E
F
Boundary Compensation Control
WT380-IDC Back
®
Driver Module Enclosure
IDC
A
Rigid Cast-Aluminum Woofer Chassis
B
Sophisticated 4th Order Crossover
C
Protective Crossover Cover
D
Patented Tri-Grip Mounting Clamps
E
F
Gold-plated Cable Terminals
WB8 construction bracket ts all
8˝ In-wall speakers
WB6 construction bracket ts all
6.5˝ In-wall speakers
G
Ultra-powerful Neodymium magnets
monitoraudio.com
Theatre systems
Create your theatre
In-Ceiling 5.1 Theatre
A
C
Front Left-Centre-Right main loudspeakers
Rear Left-Right surround loudspeakers
Add your choice of Monitor Audio subwoofer to complete the theatre
You can use in-wall front IDC loudspeakers with in-ceiling left-right surrounds if desired
B
In-Wall 5.1 Theatre
D
A
B
C
Front
Theatre at a glance
8” In-Ceiling Loudspeakers
6.5” In-Ceiling Loudspeakers
8” In-Wall Loudspeakers
6.5” In-Wall Loudspeakers
Best choice speakers are indicated by bold, coloured type
6.1 and 7.1 Theatres:
Use three surround loudspeakers for 6.1 theatres and use four surround loudspeakers for 7.1 theatres
CT180, CT280, CT280-IDC, CT380-IDC
WT180, WT280, WT280-IDC, WT380-IDC
Left - Center - Right
Speakers
CT165, CT265, CT265-IDC
WT165, WT265 CT265-FX, or use same as front speaker choice
Rear
Surround
Speakers
CT380-FX, or use same as front speaker choice
CT265-FX, or use same as front speaker choice
CT380-FX, or use same as front speaker choice
monitoraudio.com
Monitor Audio Ltd
24 Brook Road, Rayleigh
Essex, SS6 7XJ
England
Tel: + 44 (0)1268 740580
Fax: + 44 (0)1268 740589
Email: info@monitoraudio.co.uk
monitoraudio.com
Designed in the United Kingdom
Loading...