USER GUIDE
SHOE RACK BENCH
Natural / Stylish / Unique
HARDWARE
HINGE ASSEMBLY
DOOR STOPPER ASSEMBLY
(a) Top Panel x 1
(b) Back Panel x 1
(c) Front Panel x 1
(d) Bottom Panel x 1 (With Groove)
(e) Door Panel x 2
(f) Panel x 1
(i) Back Slat x 1
(j) Middle Slat x 1
(k) Furniture Pad x 1
(q) Door Stopper
(r) Hinge
(l) Left Frame x 1
(m) Right Frame x 1
(n) Door Panel x 1
(o) Vertical Slat x 1
(With Groove)
(p) Vertical Slat x 1
(t) Long Screw(s) Brace
Install Hinges (r) on Back Panel (b) with Small Screws
(v).
© 2020-2023 by Pundarika LLC - MoNiBloom.com
DOOR ASSEMBLY
Install Brace (s) on Door Panel (e) with Small Screws (v) as
picture shown.
Install Door Stoppers (q) on Left
Frame (l) with Small Screws (v).
The as sem bly ins truct ions may v ary d epen ding on t he num ber o f ti ers.
ATTENTION
1
Please always read and follow the assembly, maintenance and operating
instruction.
2
Do not discard any of the packaging until you have checked that you have all
the parts and pack of fittings.
3
Keep children away during assembly. This item contains small parts which can
be swallowed by children.
4
Wipe frames with water gently, do not use bleach, acid, or other solvents.
5
Check all hardwares before assembly. Incorrect parts used may lead to
damage.
Install Door Stoper (q) on Vertical
Slat (p) with Small Screws (v).
Install Brace (s) on Door Panel (n) with Small Screws (v) as
picture shown.
(g) Bottom Panel x 2 (h) Back Panel x 3
© 2020-2023 by Pundarika LLC - MoNiBloom.com © 2020-2023 by Pundarika LLC - MoNiBloom.com
(u) Big Screw (v) Small Screw
(w) Allen Wranch
Scan the QR code to view the
assembly video.
FINISHED PRODUCT
ASSEMBLY INSTRUCTIONS
1
Position Left Frame (l) and Bottom Panel (d),
Secure them with Big Screws (u).
6
Insert Back Panel (h) along the Groove of the
Frame.
2
Secure Vertical Slat (p) and Furniture Pad (k) with
Big Screws (u). Door Stopper on the Slat faces
out.
7
Insert rest of Back Panels (h) and Back Slats (i)
along the Groove.
3
Secure Right Frame (m) with Big Screws (u).
© 2020-2021 by Pundarika LLC - MoNiBloom.com
8
Secure Back Slat (b) and Hinges (r) with Big
Screws (u) as picture shown.
4
Secure Panel (f) with Big Screws (u).
9
Secure Middle Slat wit Big Screws (u).
5
Secure Vertical Slat (o) with Big Screws (u).
Groove align with Bottom Panel (b).
10
Insert Bottom Panels (g) along the Groove.
11
Secure Front Slat (c) with Big Screws (u). Use
Long Screws (t) on the position shown above.
12
Secure Top Panel (a) as picture shown. Align the
Hinges and Tighten the screws.
13
Secure Door Panel (e) with Small Screws (v).
© 2020-2021 by Pundarika LLC - MoNiBloom.com
14
Repeat Step 13.
15
Position Door Panel (n), Secure it with Small
Screws (v).
Loading...