Page 1
USER GUIDE
SHOE RACK
Natural / Stylish / Unique
HARDWARE
ASSEMBLY INSTRUCTIONS
The assembly instructions may vary depending on the number of tiers.
(e) Top Panel x 1
(f) Back Panel x 2
(p) Big Screw
(a) Left Frame x 1
(c) Top Door Panel x 1
(d) Door Panel x 3
(m) Hinge
(b) Right Frame x 1
(n) Hinge
(o) Allen Wrench
ATTENTION
1
Please always read and follow the assembly, maintenance and operating instruction.
2
Do not discard any of the packaging until you have checked that you have all the parts
and pack of fittings.
3
Keep children away during assembly. This item contains small parts which can be
swallowed by children.
4
Wipe frames with water gently, do not use bleach, acid, or other solvents.
5
Check all hardwares before assembly. Incorrect parts used may lead to damage.
(g) Panel x 3 (Small than other Panel)
(h) Bottom Panel x 1 (With Groove)
(i) Hinge Panel x 3
(Has Door Stopper Hole)
(j)
Slat x 1
(k)
Slat x 1
(l)
Slat x 1
(q) Medium Screw
(r) Small Screw
1
Install Hinges (m) on Bottom Panel
(h) and Hinge Panels (i) with Small
Screws (r).
Secure Right Frame (b) with Big
4
Screws (p). Then install Slat (j) with
Medium Screws (q).
2
Position and secure Bottom Panel (h)
and Hinge Panels (i) on Left Frame
(a) with Big Screws (p) as picture
shown.
© 2020 - 2023 by Pundarika LLC - MoNiBloom.com
5
Insert Back Panels (f) and Slats (k)
along the grooves with Slats (k) in
the Middle of Back Panels (f).
3
Install Panels (g) with Big Screws (p)
as picture shown.
6
Secure Top Panel (e) with Big Screws
(p).
Scan the QR code to view the
assembly video.
© 2020-2023 by Pundarika LLC - MoNiBloom.com © 2020-2023 by Pundarika LLC - MoNiBloom.com
FINISHED PRODUCT
Install Slat (l) on the groove of Back
7
Panels (f).
8
Secure Top Door Panel (c) and Door
Panels (d) with Small Screws (r).
9
Done!
Loading...