USER GUIDE
ENTRYWAY CABINET
Natural / Stylish / Unique
HARDWARE
ASSEMBLY INSTRUCTIONS
The assembly instructions may vary depending on the number of tiers.
(c) Door Panel x 5
(d) Back Panel x 5
(e) Top Panel x 1
（Single Side with Groove）
(a) Left Side Frame x 1 (b) Right Side Frame x 1
(j) Short Screws
(m) Metal Clip
(k) Medium Screws
ATTENTION
1
Please always read and follow the assembly, maintenance and operating instruction.
2
Do not discard any of the packaging until you have checked that you have all the parts
and pack of fittings.
3
Keep children away during assembly. This item contains small parts which can be
swallowed by children.
4
Wipe frames with water gently, do not use bleach, acid, or other solvents.
5
Check all hardwares before assembly. Incorrect parts used may lead to damage.
(f) Door Stopper Panel x 5
（Double Side with Groove）
(g) Inner Panel x 5
(h) Door Stopper x 5 (i) Door Handle x 5
(l) Long Screws
(n) Door Gasket
(o) Allen Wrench
①
Position Side Frames (a) (b) on the
floor and insert Metal Clips (m) into
the pre-drilled holes one by one.
© 2020 - 2023 by Pundarika LLC - MoNiBloom.com
④
Insert Back Panel (d) along the groove
of the Side Frames.
Install Door Gasket
with Short Screws (j)
②
Install Door Stoppers on each Door
Stopper Panel (f) with Short Screws (j).
⑤
Repeat Step 3 & 4 to install the rest
Door Stopper Panels and Back Panels.
Loose the screws
on the panel
③
Connect both Side Frames with one of
the Door Stopper Panel with Door
Stopper on top. Secure them with
Long Screws (l).
⑥
Install Top Panel (e) and all Inner
Panels (g) with Long Screws (l).
Scan the QR code to view the
assembly video.
© 2020-2023 by Pundarika LLC - MoNiBloom.com © 2020-2023 by Pundarika LLC - MoNiBloom.com
FINISHED PRODUCT
⑦
Install Door Gasket (n), Door Handle
(i), and Metal Clips (m) on each Door
Panel (c) as picture shown.
Insert into the
groove on Side frame
⑧
Snap the Door Panels into the Side
Frames as picture shown.
⑨
Repeat Step 8 to install the rest of
Door Panels.
Loading...