USER GUIDE
WOODEN FLOWER RACK
Natural / Stylish / Unique
HARDWARE
ASSEMBLY INSTRUCTIONS
Please wear glove during install.
(c) Pillar x 2
(a) Top Panel x 1
(Wider than other Panels）
(d) Tier 1 Slat x 2
(e) Tier 2 Slat x 2
ATTENTION
1
Please always read and follow the assembly, maintenance and operating
instruction.
2
Do not discard any of the packaging until you have checked that you have
all the parts and pack of fittings.
3
Keep children away during assembly. This item contains small parts which
can be swallowed by children.
4
Wipe frames with water gently, do not use bleach, acid, or other solvents.
5
Check all hardwares before assembly. Incorrect parts used may lead to
damage.
(g) Back Bracket x 1
3
1
Position Pillars (c) and Back Bracket
(g) as picture shown. Secure them
(h) Leg x 6
(i) Gloves
(k) Nut (l) Pointed Tail Screw(b) Panel x 2 (f) Tier 3 Slat x 2
(j) Flat Head Screw
(m) Allen Wrench
with Pointed Tail Screw (l).
Install with
Pointed Tail
screw
Position Tier 2 Slat (e) and Leg (h)
4
as picture shwon. Secure them with
Pointed Tail screw (l).
2
Secure Tier 1 Slat (d) and Legs (h)
with Pointed Tail Screw (l). Be aware
of the alignment.
© 2020 - 2021 by Pundarika LLC - MoNiBloom.com
Install with Flat
Head Screw (j)
5
Secure Panel (b) with Flat Head
Screw (j).
Position Panel (b) and secure it with
Flat Head Screw (j).
Install with Pointed
Tail screw (l)
6
Position and secure Leg (h) with
Pointed Tail Screw (l).
Scan the QR code to view the
assembly video.
Finally Secure Top Panel (a) with
7
Install Tier 3 Slat (f) with Pointed
FINISHED PRODUCT
© 2020-2021 by Pundarika LLC - MoNiBloom.com © 2020-2021 by Pundarika LLC - MoNiBloom.com
Tail Screw (l) as picture shown.
8
Flat Head Screw (j).
9
Done!
Loading...