USER GUIDE
ASSEMBLY INSTRUCTIONS
WOODEN FLOWER RACK
Natural / Stylish / Unique
HARDWARE
ATTENTION
1
Please always read and follow the assembly, maintenance and operating
instruction.
2
Do not discard any of the packaging until you have checked that you have all
the parts and pack of fittings.
3
Keep children away during assembly. This item contains small parts which can
be swallowed by children.
4
Wipe frames with water gently, do not use bleach, acid, or other solvents.
5
Check all hardwares before assembly. Incorrect parts used may lead to
damage.
（This is for 4 tier shelf 70cm Long only. Hardware count vary for different tier of shelf.）
(a) Pillar x 4
(b) Panel x 4
(c) Round Pillar x 8
(d) Fence x 4
(e) Allen Wrench
(f) Screws
(g) Flat Head Screw
(h) Nut
Do not Hold the frames up after the
Round Pillars are Installed.
----------
1
Connect Pillars (a) with Round Pillars (c) as picture shown.
Leave them on the ground until the next step.
3
Repeat Step 2 to install the other Panels (b).
© 2020-2021 by Pundarika LLC - MoNiBloom.com
Pay Attention to the
Orientation of the Nuts
Do not tighten the Screws at this stage.
2
Position Panel (b) and the Installed Frames from Step 1
as picture shown. Secure them with Flat Head Screws (g)
and Nuts (h)
Use Screws (f) to install the
Fence at desired height.
4
Position 1 Fence (d) on the outside of the Pillars. Secure
it with Screws (f) as picture shown.
Scan the QR code to view the
assembly video.
FINISHED PRODUCT
5
Repeat Step 4 to install the other Fences as picture
shown.
© 2020-2021 by Pundarika LLC - MoNiBloom.com © 2020-2021 by Pundarika LLC - MoNiBloom.com
6
Done!
Loading...