USER GUIDE
ASSEMBLY INSTRUCTIONS
FLOWER RACK
Natural / Stylish / Unique
HARDWARE
(a) Front Side Pillar x 2
(b) Back Side Pillar x 2
(c) Front Support Slat x 4
(d) Back Support Slat x 4 (i) Screw
ATTENTION
1
Please always read and follow the assembly, maintenance and operating
instruction.
2
Do not discard any of the packaging until you have checked that you have all
the parts and pack of fittings.
3
Keep children away during assembly. This item contains small parts which can
be swallowed by children.
4
Wipe frames with water gently, do not use bleach, acid, or other solvents.
5
Check all hardwares before assembly. Incorrect parts used may lead to
damage.
（This is for 4 tier 70cm shelf only. Hardware count vary for different tier of shelf.）
(e) Top Panel x 1
(f) Second Panel x 1
(g) Third Panel x 1 (h) Bottom Panel x 1
(j) Allen Wrench
Front Side Pillar
(a) Assembly
1
Secure Front Side Pillars (a) and Front Support Slats (c) with
Screws (j). Front Support Slat (c) is Installed on the Side of
Front Side Pillar (a).
Connect the frames at
the top with screws
3
Secure Front Side Pillart (a) and Back Side Pillar (b) with
Screws (i) at the Top.
Panel (e)
Panel (f)
Panel (g)
Front Support Slat (c) is Installed
on the Side of Front Side Pillar (a)
© 2020 - 2021 by Pundarika LLC - MoNiBloom.com
Be aware of the
pre-drilled holes position
Back Side Pillar
(b) Assembly
The Concave Side of Back Side
Pillar (b) Hole Faces Outward
2
Secure Back Side Pillars (b) and Back Support Slats (d) with
Screws (j).
Secure Bottom Panel (h)
on the back of Side Pillar (b)
Panel (h)
4
Secure Bottom Panel (h) between Side Pillar (a)(b) with
Screw (j).
Scan the QR code to view the
assembly video.
5
FINISHED PRODUCT
© 2020-2021 by Pundarika LLC - MoNiBloom.com © 2020-2021 by Pundarika LLC - MoNiBloom.com
Repeat Step 4 to install Panels (e)(f)(g) as picture shown.
6
Done!
Loading...