USER GUIDE
ASSEMBLY INSTRUCTIONS
Please wear glove during install.
WOODEN FLOWER RACK
Natural / Stylish / Unique
HARDWARE
(e) Support Leg x 11
(a) Tier 1 Panel x 2
(b) Tier 2 Panel x 1
(c) Tier 3 Panel x 1
(d) Tier 4 Panel x 1
ATTENTION
1
Please always read and follow the assembly, maintenance and operating
instruction.
2
Do not discard any of the packaging until you have checked that you have
all the parts and pack of fittings.
3
Keep children away during assembly. This item contains small parts which
can be swallowed by children.
4
Wipe frames with water gently, do not use bleach, acid, or other solvents.
5
Check all hardwares before assembly. Incorrect parts used may lead to
damage.
(f) 4 Tier Stand Pillar x 1
(g) 3 Tier Stand Pillar x 1
(h) Tier 1 Pillar x 1
(i) Tier 2 Pillar x 1
(o) Flat Head Screw
(j) Tier 1 Support
Leg x 1
(p) Long Screw (q) Short Screw
(r) Nut (s) Fixed Bolt Screw (t) Allen Wrench (u) Glove
(k) Tier 1 Side Pillar x 2
(l) Tier 2 Side Pillar x 2
(m) Tier 3 Side Pillar x 2
(n) Tier 4 Side Pillar x 2
Use Flat Head
Screws (o) to assemble
Tier 1 Panels (a)
Secure with Flat Head Screw (o)
and Fixed Bolt Screw (s)
Use Long
Screw (p)
1
Position 4 Tier Stand Pillar (f), Tier 1
Side Pillar (k) and 2 Support Legs (e)
as picture shown. Secure them with
Flat Head Screw (o) and Fixed Bolt
Screw (s).
Leg (e)
4
Same as step ①②③, Install 2 Legs (e)
and Tier 4 Side Pillars (n).
Use Flat Head Screw
(o) on the Side
With Pre-Drilled
hole on top of
Pillar (f)
Tier 1 Side
Pillar (k)
Leg (e)
Tier 4 Side
Pillar (n)
Use Short Screws (q)
in the Middle
Panel (a)
Use Long Screw (p)
Leg (e)
2
Position 2 Legs (e) and Tier 2 Side
Pillars (l) as picture shown. Install
them in the same way as step ①.
© 2020-2021 by Pundarika LLC - MoNiBloom.com
Use Long Screw (p)
Tier 2 Pillar (i)
Leg (e)
Tier 1 Pillar (h)
3 Tier Stand
Pillar (g)
Tier 1 Support
Leg (j)
5
Position 3 Tier Stand Pillar (g), Tier 1
Support Leg (j), Tier 1 Pillar (h), Tier
2 Pillar (i), and Support Leg (e) as
picture shown. Secure with Long
Screws (p).
Tier 1
Tier 2 Side
Pillar (l)
Use Long Screw (p)
3
Repeat step ①② on the top tier with
2 Legs (e) and Tier 3 Side Pillars (m).
6
Position the two completed frames
from Step ④ and ⑤ as picture shown.
Tier 3 Side
Pillar (m)
Leg (e)
Scan the QR code to view the
assembly video.
FINISHED PRODUCT
Position Tier 1 Panel (a) as picture
shown. Secure with Flat Head Screw
(o) on the side and Short Screws (q)
in the middle of the panel.
© 2020-2021 by Pundarika LLC - MoNiBloom.com © 2020-2021 by Pundarika LLC - MoNiBloom.com
87
Repeat step ⑦ to install the rest of
Panels (b)(c)(d).
9
Done!
Loading...