USER GUIDE
ASSEMBLY INSTRUCTIONS
Please wear glove during install.
WOODEN FLOWER RACK
Natural / Stylish / Unique
HARDWARE
(a) Tier 1 Side Pillar x 2
(b) Tier 2 Side Pillar x 2
(c) Tier 3 Side Pillar x 2
(d) Tier 1 Pillar x 1
(e) Tier 2 Pillar x 1
(f) Tier 3 Pillar x 1
ATTENTION
1
Please always read and follow the assembly, maintenance and operating
instruction.
2
Do not discard any of the packaging until you have checked that you have
all the parts and pack of fittings.
3
Keep children away during assembly. This item contains small parts which
can be swallowed by children.
4
Wipe frames with water gently, do not use bleach, acid, or other solvents.
5
Check all hardwares before assembly. Incorrect parts used may lead to
damage.
(g) Tier 3 Panel x 1
(h) Tier 2 Panel x 1
(i) Tier 1 Panel x 1
(j) Middle Leg x 1
(l) Short Screw (m) Gloves (n) Allen Wrench
(k) Leg x 8
(o) Flat Head Screw
(q) Fixed Bolt Screw
(p) Long Screw
(r) Nut
Secure with Flat Head Screw (o) and
Fixed Bolt Screw (q)
With Pre-Drilled
hole on top of
Pillar (f)
Tier 1 Side
Pillar (a)
Use Long
Screw (p)
Leg (k)
1
Position Tier 3 Pillar (f), Tier 1 Side
Pillar (a) and 2 Legs (k) as picture
shown. Secure them with Flat Head
Screw (o) and Fixed Bolt Screw (q).
Use Long Screw to secure
Tier 1
Tier 2
Pillar (e)
4
Position Tier 2 Pillar (e), Middle Leg
(j) and Tier 1 Pillar (d) as picture
shown. Secure them with Long
Screw (p).
Tier 2 Panel (h)
Pillar (d)
Middle
Leg (j)
Use Long Screw (p)
2
Position 2 Legs (k) and Tier 2 Side
Pillar (b) as picture shown. Install
them in the same way as step ①.
© 2020-2021 by Pundarika LLC - MoNiBloom.com
5
Position the frames from Step ③ and
Step ④ as picture shown.
Tier 2 Side
Pillar (b)
Tier 3 Panel (g)
Leg (k)
3
Repeat step ①② on the top tier with
2 Legs (k) and Tier Side Pillar (c).
Use Flat Head Screw (o)
6
Position Tier 1 Panel (i) and 2 Legs
(k) as picture shown. Secure them
with Flat Head Screw (o) on the side
and Short Screws (l) in the middle of
the panel.
Use Long Screw (p)
on the Side
Tier 3 Side
Pillar (c)
Leg (k)
Use Short Screws (l)
in the Middle
Tier 1
Panel (i)
Scan the QR code to view the
assembly video.
FINISHED PRODUCT
7
Position Tier 2 Panel (h). Install it in
the same way as in step ⑥ as picture
shown.
© 2020-2021 by Pundarika LLC - MoNiBloom.com © 2020-2021 by Pundarika LLC - MoNiBloom.com
8
Repeat step ⑥ and ⑦ on the top
tier with Tier 3 Panel (g).
9
Done!
Loading...