USER GUIDE
BAMBOO FLOWER RACK
Natural / Stylish / Unique
HARDWARE
ASSEMBLY INSTRUCTIONS
There is extra pre-drilled hole
in the middle of the Lower Tray
(c) Lower Tray x 1(b) Upper Tray x 1
(a) Pillar x 3
(d) Leg x 4
ATTENTION
1
Please always read and follow the assembly, maintenance and operating
instruction.
2
Do not discard any of the packaging until you have checked that you have all
the parts and pack of fittings.
3
Keep children away during assembly. This item contains small parts which can
be swallowed by children.
4
Wipe frames with water gently, do not use bleach, acid, or other solvents.
5
Check all hardwares before assembly. Incorrect parts used may lead to
damage.
Scan the QR code to view the
assembly video.
(f) Allen Wrench(e) Screws
Picture show 4 racks in different
sizes put together.
FINISHED PRODUCT
1
Position Lower Tray (c), Pillar (a),
and Leg (d) as picture shown. Secure
them with Screw (e).
4
Position and secure Upper Tray (b)
with Screws (e) provided.
(Pay attention to the front and back
of the tray, with large pre-drilled
hole on the up side)
2
Repeat Step 1 to install the other 2
Pillars and Legs on the Lower Tray.
© 2020 - 2021 by Pundarika LLC - MoNiBloom.com
5
Finally, intsall the last Leg (d) to the
Lower Tray as picture shown.
3
Turn the flower stand over.
(As picture shown)
6
Is the installation process simple?
Put the potted plants you like!
© 2020-2021 by Pundarika LLC - MoNiBloom.com © 2020-2021 by Pundarika LLC - MoNiBloom.com
Loading...