USER GUIDE
FLOWER RACK
Natural / Stylish / Unique
ASSEMBLY INSTRUCTIONS
The Front Support Slat (c) is installed
on the side of the Front Side Pillar (a)
The concave side of Back Side
Pillar (b) hole faces outward
Connect the frames at
the top with screws
HARDWARE
(a) Front Side Pillar x 2
(b) Back Side Pillar x 2
(c) Front Support Slat x 3
(d) Back Support Slat x 3 (h) Screw
（This is for 3 tier 70cm shelf only. Hardware count vary for different tier of shelf.）
(e) Bottom Panel x 1 (f) Second Panel x 1
ATTENTION
1
Please always read and follow the assembly, maintenance and operating
instruction.
2
Do not discard any of the packaging until you have checked that you have all
the parts and pack of fittings.
3
Keep children away during assembly. This item contains small parts which can
be swallowed by children.
4
Wipe frames with water gently, do not use bleach, acid, or other solvents.
5
Check all hardwares before assembly. Incorrect parts used may lead to
damage.
(g) Top Panel x 1
(i) Allen Wrench
Front Side Pillar
(a) Assembly
Back side pillar
(b) Assembly
1
Secure Front and Back Side Pillars (a)(b) and Support
Slats (c)(d) with Screws (i).
(Back Support Slat is Installed on the Upper Back Hole)
3
Secure Bottom Panel (e) with Screw (i) as picture shown.
© 2020 - 2021 by Pundarika LLC - MoNiBloom.com
Secure Panel (e) on the Back
Side Pillar (d) with Screw (i)
Be aware of the
pre-drilled holes position
2
Secure Front Side Pillar (a) and Back Side Pillar (b) with
Screws (i) at the Top.
4
Repeat Step 3 to install Second Panel (f) as picture shown.
Scan the QR code to view the
assembly video.
5
FINISHED PRODUCT
© 2020-2021 by Pundarika LLC - MoNiBloom.com © 2020-2021 by Pundarika LLC - MoNiBloom.com
Repeat Step 3 to install Top Panel (g) as picture shown.
6
Finished.
Loading...