USER GUIDE
ENTRYWAY CABINET
Natural / Stylish / Unique
HARDWARE
HINGE ASSEMBLY
(a) Left Side
Frame x 1
(h) Bottom Panel x 1 (With Slot)
(i) Panel x 1 (With Door Stopper)
(b) Right Side
Frame x 1
(c) Small Panel x 3
(e) Door Panel x 2
(f) Back Panel x 4
(k) Bottom Cover x 1
(l) Back Support Slat x 1
(m) Back Support Slat x 2
(n) Back Slat x 1
(o) Support Slat x 6
(d) Top Door Panel x 1
(g) Top Panel x 1
(w) Short Slat x 1
① Install Door Stoppers (u) on Panel (i) with Small Screws (r).
DOOR ASSEMBLY
① Install Gasket (s) on Door Panels (e) with Small Screws (r).
② Install Hinges (t) with Small Screws (r) as picture shown.
ATTENTION
1
Please always read and follow the assembly, maintenance and operating
instruction.
2
Do not discard any of the packaging until you have checked that you have all
the parts and pack of fittings.
3
Keep children away during assembly. This item contains small parts which can
be swallowed by children.
4
Wipe frames with water gently, do not use bleach, acid, or other solvents.
5
Check all hardwares before assembly. Incorrect parts used may lead to
damage.
② Flip the panel over and install Hinges (t) with Small
Screws (r).
(j) Panel x 2 (Smallest Size)
© 2020-2023 by Pundarika LLC - MoNiBloom.com © 2020-2023 by Pundarika LLC - MoNiBloom.com
(p) Large Screw
(s) Gasket
(q) Medium Screw
(t) Hinge (u) Door Stopper
(r) Small Screw
Scan the QR code to view the
assembly video.
(v) Allen Wrench
FINISHED PRODUCT
ASSEMBLY INSTRUCTIONS
The assembly instructions may vary depending on the number of tier
1
Position and secure Left Side Frame (a) and
Bottom Panel (h) with Large Screws (p).
Keep grooves aligned.
6
Install Small Panel (c) and Support Slat (o)
with Large Screws (p) as picture show.
2
Install Panels (j) with Large Screws (p).
7
Position and secure Right Side Frame (b)
with Large Screws (p).
3
Install Panel (i) with Large Screws (p) as
picture shown.
8
Install Bottom Cover (k) with Medium
Screws (q).
© 2020-2021 by Pundarika LLC - MoNiBloom.com
4
Install 2 Small Panel (c) with Large Screws
(p) as picture shown.
9
Flip the frame up.
5
Install 6 Support Slats with Large Screws (p)
as picture shown.
Slat (m)
Slat (l)
Secure with
Large Screw (p)
10
Install Back Support Slats (l)(m) as picture
shown. Secure Back Support Slat (l) with
Large Screws (p). Then insert Back Panels (f)
along the groove.
Slat (m)
11
Position and secure Top Panel (g) with Large
Screws (p).
© 2020-2021 by Pundarika LLC - MoNiBloom.com © 2020-2021 by Pundarika LLC - MoNiBloom.com
12
Install Short Slat (w) and Back Slat (o) with
Large Screws (p).
13
Install Top Door Panel (d) and Hinges (t)
with Small Screws (r).
14
Install Door Panels (e) with Small Screws (r).
15
Done!
Loading...