USER GUIDE
ENTRYWAY CABINET
Natural / Stylish / Unique
HINGE ASSEMBLY
HARDWARE
(a) Left Side Frame x 1
(b) Right Side Frame x 1
(c) Back Panel x 4
(d) Back Support Slat x 2
(e) Back Support Slat x 1
(f) Bottom Cover x 1
(g) Top Slat x 1
(h) Bottom Panel x 1 (With Groove)
This is for 9 tier shelf only. Hardware count vary for different tier of shelf.
(k) Support
Slat x 8
(n) Long
Screw
(m) Panel x 3
(o) Large
Screw
(j) Top Panel x 1
(l) Small Panel x 4
(p) Medium
Screw
(q) Small
Screw
①
Separate Hinges (s).
Install the other half of the Separated Hinge
onto Bottom Panel (h) with Small Screws (q).
ATTENTION
1
Please always read and follow the assembly, maintenance and operating
instruction.
2
Do not discard any of the packaging until you have checked that you have all
the parts and pack of fittings.
3
Keep children away during assembly. This item contains small parts which can
be swallowed by children.
4
Wipe frames with water gently, do not use bleach, acid, or other solvents.
5
Check all hardwares before assembly. Incorrect parts used may lead to
damage.
Scan the QR code to view the
assembly video.
②
Install them on Door Panels (i) with
Small Screws (q).
Install them onto Panels (m) with Small
Screws (q).
(i) Door Panel x 4
(s) Hinge(r) Hinge
© 2020-2021 by Pundarika LLC - MoNiBloom.com © 2020-2021 by Pundarika LLC - MoNiBloom.com
(t) Allen Wrench
FINISHED PRODUCT
ASSEMBLY INSTRUCTION
1
Position and secure Left Side Panel (a) and
Bottom Panel (h) with Large Screws (o). Align the
groove on both Panels.
6
Install 2 more Support Slats (k) on the Panel from
Step 5 with Large Screws (o).
2
Install Right Side Frame (b) with Large Screws
(o).
7
Repeat Step 5 and 6 until all the Support Slats (k)
are used.
3
Position and secure Back Support Slat (e) with
Large Screws (o).
© 2020-2021 by Pundarika LLC - MoNiBloom.com
8
Install Small Panels (l) as picture shown with
Large Screws (o).
Install 2 Support Slats (k) with Large Screws (o)
4
as picture shown.
9
Install Top Panel (j) with Large Screws (o).
5
Install Panel (m) on the Support Slats (k)
with Large Screws (o).
10
Flip around the frame, insert Back Panel (c)
along the groove.
11
Insert Back Panels (d) then follow Step 10 to
insert all the Back Panels (c).
© 2020-2021 by Pundarika LLC - MoNiBloom.com © 2020-2021 by Pundarika LLC - MoNiBloom.com
12
Position Top Slat (g) as picture shown, secure it
with Large Screws (o) and Long Screw (n) from
the top.
13
Flip around the frame.
14
Install all the Door Panels (i) and Hinges (r) with
Small Screws (q).
15
Install Bottom Cover(f) with Medium Screws
(p).
Loading...