Moneual RYDIS H65 User Manual

User Manual

Ver 1.0

RYDIS H65

Thank you for purchasing the Moneual RYDIS H65. Before using the product, please read this User Manual carefully, and keep it for future reference. Depending on your model, some contents of this User Manual may dier from the actual product. The contents of this User Manual are subject to change without notice.

RYDIS Hybrid

Robot Vacuum Cleaner

User Manual

Learn more about user manual at Moneualusa.com

RYDIS Hybrid

Robot Vacuum Cleaner

User Manual

RYDIS H65

Features

Hybrid Cleaning

Full utilization of the 4-in-1(Twin Side Brush + Main Brush + BLDC Suction (vacuum) + Wet/Dry Disposable Mop) cleaning technology for a spotless hard oor.

Mop Cleaning

Utilizing the attachable full sized mop, the Mop Cleaning mode is optimized for cleaning even the nest dusts that are harmful to your health.

Wet/Dry Disposable Mop

Cleaning with standard sweeping cloth in the market.

Random S Pattern Mop Cleaning

For quiet and ecient cleaning, RYDIS H65 provides S Pattern Mop Cleaning mode.

Shadow Cleaning

You can clean areas under your bed, sofa, or furniture that are dicult to clean with an upright vacuum cleaner or by hand.

Shadow Cleaning

Turbo Option

While you are using the Hybrid / Vacuum / Shadow Cleaning, the Turbo Option is turned on by default. Though, you can turn o the Turbo Option to increase cleaning time

High Performance BLDC Motor

The cleaning performance is excellent due to the powerful BLDC (suction) motor. The BLDC motor is 30% more powerful than a DC motor, and the lifetime is approximately 10 times as long (estimated: 5,000 hours).

3.3 inch (8.5 cm)

3.3 inches (8.5 cm) Slim Design

With a slim design, the RYDIS H65 is just 3.3 inches (8.5 cm) high, enabling it to clean under the bed and the sofa, where it is dicult to clean with a vacuum cleaner or by hand.

Eco-friendly Lithium Iron Phosphate Battery

The RYDIS H65 uses an eco-friendly battery that does not contain any heavy metals or acids that are harmful to the human body. The Lithium Iron Phosphate Battery has a lifetime that is approximately three times longer (1,000 cycles) than the standard lithium-based or nickel-based batteries. It provides higher levels of operational safety due to the high resistance to heat and explosion.

Auto Charging

After it is nished cleaning or when it detects that the battery is low, the RYDIS H65 automatically returns to the charging station and starts charging.

Obstacle Avoidance and Fall Protection

The obstacle detection sensors in the bumper help the RYDIS H65 avoid obstacles and walls. The cli detection sensors in the bottom detect height dierences and prevent it from falling down stairs.

Contents

Before Use

Features

Safety Information

What’s in the Box

Overview

Installing

Installing the Charging Station

Installing the Side Brushes

Installing the Mop

Charging

Product Operation

Before You Start

What do you want to clean?

Hybrid Cleaning

Vacuum Cleaning

Mop Cleaning

Shadow Cleaning

Tur bo O pti on

Maintenance

Language Setting

Cleaning the Dust Bin

Cleaning the Dust Filter

Cleaning Sensors and Wheels

Cleaning the Dust Inlet

Using and Managing the Battery

Voice Guidance

Error Message Description

Customer Support

Troubleshooting

Specications

Moneual Robot Vacuum Cleaner

Limited Warranty

Before Use

Safety Information

Please read and follow the instructions in this manual to ensure your safety and the safe use of your RYDIS H65.

Safety symbols

In this manual, various Warnings, Cautions and Notes are provided to help you to avoid potential hazards that can hurt you and/or damage your RYDIS H65.

You may be seriously injured up to death if you do not follow these instructions.

You may be injured or your RYDIS H65 may be damaged if you do not follow this instruction.

You should refer to this note when using your RYDIS H65.

Warning Caution Note

Before you use

Do not install or use the RYDIS H65 in a place where it will be exposed to direct sunlight.

●

If the power adapter becomes overheated during charging it may cause a re, short circuit, or electrical shock.

●

The RYDIS H65 may become discolored and deformed.

Do not install the charging station on an inclined oor, and do not apply impact to the charging station.

●

The charging station may become damaged or broken.

Do not use the product in a room with an unattended child or an elderly person.

●

There is a risk that the child or elderly person may become frightened.

The RYDIS H65 is not intended for use by children, or by persons with reduced physical, sensory or mental

capabilities, unless they have given supervision or instruction concerning the use of the RYDIS H65 by a person responsible for their safety.

●

This may cause injury or damage the RYDIS H65.

Before you use the RYDIS H65, remove any small objects, clothes, and fragile objects from the oor.

●

This may cause damage to the RYDIS H65 and obstruct the movement of the RYDIS H65.

●

Make sure to remove fragile objects (glass, china, owerpot, etc.).

●

Small cloths, power cords, belts, towels, pads, and telephone cords can become entangled in the wheels or brushes.

RYDIS H65

Install the charging station in a location that can be easily accessed by the RYDIS H65.

●

If you install the charging station in a corner or if there are many obstacles around the charging station, it may prevent the RYDIS H65 from automatically charging.

Make sure that the charging station is always plugged into a power source.

●

If no power is supplied to the charging station, you will not be able to use the automatic charge function.

When you use

Remove objects (such as loose clothing, towels, cloths, belts, etc) scattered on the oor before cleaning. Keep objects away from brushes and wheels to prevent entanglement.

●

This may cause noise, reduce the suction power, and damage the RYDIS H65.

Do not use the power adaptor with another appliance.

●

This may cause damage to the appliance and re by overheating.

Do not use or store the RYDIS H65 near ammable materials (alcohol, gasoline, kerosene, thinner, etc.) or heating

sources (cigarettes, candles, stove, etc.).

●

This may cause re and damage to the RYDIS H65.

If you notice smoke or a burning smell coming from the RYDIS H65, immediately turn the system power switch o

and contact our service center.

Do not stand or sit on the RYDIS H65.

●

Movement of the RYDIS H65 may cause injury or the RYDIS H65 may be damaged.

Do not use the RYDIS H65 on a narrow high place such as a desk, table, etc.

●

The RYDIS H65 may fall o which could cause injury or damage to the product.

Do not let the RYDIS H65 pass over or sweep up oil, pet droppings, etc.

●

This may cause malfunction of the RYDIS H65 and damage.

●

Oil or pet droppings on the wheels may cause stains in other places.

If the RYDIS H65 sucks a plastic bag in while operating, immediately remove it.

●

If you run the RYDIS H65 for a long time with the dust inlet covered with a plastic bag, the motor will overheat and the RYDIS H65 will be damaged.

Before Use

Do not press strongly or impact the bumper.

●

This may cause damage to the bumper sensors and malfunction.

Do not use the RYDIS H65 in a place where the temperature is too low or too high (lower than 23F (-5°C) and higher than 120F (49°C)).

●

This may cause damage to the product.

Do not use the RYDIS H65 when the dust bin is lled up.

●

This may reduce the suction power.

Never use the RYDIS H65 without the lters.

●

Doing so may cause a malfunction of the RYDIS H65.

Do not use the RYDIS H65 in a place where the oor or wall is made of glass or mirrors.

●

The RYDIS H65 detect obstacles by using an IR sensor, so it may not detect glass and mirrors as obstacle.

Do not use the RYDIS H65 on a ooded oor, on stairs, on a table or shelf, in a warehouse, in a commercial building or

outdoors.

If you have dropped or given an impact to the RYDIS H65, contact our service center.

Electrical instructions

Please use the power source and socket with the correct Voltage and Ampere.

●

If you use a power source or socket that does not t the power specications, there is the risk of re, electrical shock, and damage to the RYDIS H65.

Make sure the power cord is not bent or crushed by heavy objects.

●

A damaged power cord may cause a re or electrical shock.

●

To repair or replace a damaged power cord, contact our qualied service center to ensure your safety.

When plugging in or removing the power plug, always plug it in or remove it by holding the plug, not the cable.

●

Stress on the cable will damage the power cord, which may cause a re or electrical shock.

RYDIS H65

Do not touch the plug or wall socket with wet hands.

●

Doing so may cause electric shock.

If you spill water into the RYDIS H65, unplug the power cord immediately.

●

Water can bring the risk of re and electrical shock.

●

Immediately remove the power cord from the outlet and contact our service center.

Do not use charging stations other than the charging station that came with your RYDIS H65.

●

Overvoltage brings the risk of re and electrical shock.

Do not install the charging station in a location that is damp or wet, dusty, or near water.

●

This may cause a re or an electrical shock and damage to the unit.

Do not touch the terminal of the charging station with any metallic object (such as a clip, pin, etc.).

●

This creates the risk of re and electrical shock.

If you do not plan to use the RYDIS H65 for an extended period of time, turn o the system power switch at the rear of RYDIS H65.

●

The battery may be discharged if you leave the system power switch on.

Others

To ensure safety, only a qualied service agent should repair or disassemble the product.

●

Any repairs done by unqualied personnel may damage the RYDIS H65 and bring the risk of a re and electrical shock.

Dispose of the battery properly.

●

If you throw the battery into a re or expose it to direct sunlight, there is the risk of re and explosion.

●

Dispose of your old batteries according to the local laws and regulations of your region.

Clean the obstacle and bottom sensors periodically.

●

If the sensor becomes covered by lint and dust, the RYDIS H65 may malfunction.

Please use the specied lter.

●

Use of a dierent lter will void your warranty.

Before Use

Please clean the RYDIS H65 after turning it o.

●

If you clean it when the power is on or it is operating, it may cause injury.

Clean the main brush, dust bin, dust lter, and dust inlet periodically.

●

If you use the RYDIS H65 for a long time without cleaning it, there is the risk of malfunction and damage.

●

Published January 31, 2014

●

RYDIS is the trademarks or registered trademarks of MONEUAL Inc. in the Republic of Korea and/or other conutries.

●

RYDIS is the trademarks or registered trademarks of MONEUAL Inc. in the Republic of Korea and/or other conutries.

●

This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by

any means or in any form, without the prior written consent of MONEUAL.

●

Depending on the model and type of your appliance, some of the contents in this manual may dier from your actual

product.

●

MONEUAL Inc. assumes no responsibility for technical or editorial errors or omissions contained herein, nor for any incidental or consequential damages and failures of the appliance caused by not following the precautions and

instructions.

●

MONEUAL Inc. assumes no responsibility for damages resulting from the use of the product that is not approved by the company.

RYDIS H65

What’s in the Box

RYDIS H65

(1400mA built-in battery)

Charging Station

Power Adaptor Side Brushes (1 set)

MR6700M Seri

Cleaning Brush

MR6700M

Series

Power Cord

▶

The appearance and specications may be changed without notice in order to improve functions or performance.

Mop Kit

H65 Wet/Dry Disposable Mop

1. Mop pad for Disposable Mop

2. Disposable Mop (Wet x 3 / Dry x 3)

User Manual

Quick Start Guide

RYDIS Hybrid

Robot Vacuum Cleaner

Quick Start Guide

RYDIS Hybrid

Robot Vacuum Cleaner

User Manual

Call Moneual Support Card

Before Use

Overview

RYDIS H65

ㅣ

Top

ㅣ

Rear

ㅣ

Bottom

ㅣ

3 4

Control Panel

Dust Bin Cover

Bumper

Obstacle and Signal Detection Sensor

Air Outlet

Adaptor Jack

System Power Switch

Signal Receiving Sensor

Cli Detection Sensors

Charging Terminals

Wheels

Side Brush Installation Pins

Dust Inlet

Main Brush

Mop Pad Installation Holes

RYDIS H65

Control Panel

Power/Charging lamp

Guide Signal Transmission Sensor

Charging Terminals

Adaptor Holder

Adaptor Jack

Signal Distance Selection Switch

Charging Station

ㅣ

Front

ㅣ ㅣ

Back

ㅣ

Start/Stop Button

Main Power Button

Cleaning Mode Selection Button

Battery Level Indicator

Turbo Option Indicator

Charging Indicator

Shadow Cleaning Indicator

Mop Cleaning Indicator

Vacuum Cleaning Indicator

Hybrid Cleaning Indicator

21 3

7 6 5

Wet/Dry Disposable Mop Kit

Mop pad for Disposable Mop

Disposable Mop (Wet x 3)

Disposable Mop (Dry x 3)

Installing

Installing the Charging Station

●

Connect the power adaptor.

●

Set the RYDIS H65 detection distance [16ft (5m) or 26ft (8m)].

●

Place the power adaptor inside of the charging station.

●

Check the power connection and make sure blue lamp is on.

●

Make sure the location of the charging station is an open area as illustrated.

Clear all obstacles in the area within 5ft (1.5m) in front, left, and right of the charging station

▶

If you install the RYDIS H65 in a place where it will be exposed to direct sunlight, the heat of the sun may interfere with the auto charging, and the RYDIS H65 may become discolored over time.

▶

If your RYDIS H65 can’t return to the charging station, reset the detection distance as recommended below.

In a narrow area, set it to16ft (5m), and in a wide area, set it to 26ft (8m).

If you set the detection distance to 26ft (8m) in a narrow area, the Auto Charging may be interfered with.

5ft

(1.5m)

5ft

(1.5m)

5ft

(1.5m)

+ 33 hidden pages

Moneual RYDIS H65 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual