Moneual MBOT 500 User Manual
Ver 1.0
User manual
MBOT 500
01
Contents
Before use
Installation
instructions
Product
operation
Care and
maintenance
Customer
service
Important Instructions
Package content
Product description
Charging station
Installing the remote control
Charging the device
Instructions before operation
Remote control & functions
Start cleaning
End cleaning
Cleaning the dust bin
Cleaning the dust lter
Cleaning the sensors and wheels
Cleaning the main brush
Cleaning the side brushes
Storage/Battery change
Cleaning the charging contact
Troubleshooting
Technical specications
03
05
06
07
08
09
10
11
12
13
14
15
16
17
18
18
19
20
21
Thank you for deciding to purchase this MONEUAL
MBOT robot vacuum cleaner. Before using the product,
please read this user manual carefully and keep it for
future reference.
Depending on the model, some content of this user
manual may vary from the actual product. The
contents of this manual are subject to change without
notice.
Copyright
All rights reserved.
Published on 1 February 2019
MONEUAL is a brand/a registered trademark of MTG
GmbH in Europe and/or other countries.
The publication is protected by copyright and all
rights are reserved. No part may be copied or
communicated in any form without prior written
approval from MONEUAL.
Depending on your model and type of device, some
content in this manual may vary.
MTG GmbH takes no responsibility for any technical
or text-related errors, omissions or any incidental or
consequential damages or malfunctions of the
equipment resulting from failure to comply with the
safety and user instructions.
MTG GmbH takes no responsibility for damage
caused by not using the device according to the
instructions.
2
02
Important Instructions
You may be killed or seriously injured
if you do not follow this instruction.
You may be injured or your appliance
may be damaged if you do not follow
this instruction.
Important information, denitions,
general rules and notes are explained.
etoNnoituaCgninraW
Warning: Please read and follow the instructions in the manual to ensure your safety and the safe use of your
robot cleaner. In case of disregard, there is no liability for personal injury and property damage. Warranty is valid
only if you follow the instructions.
Keep away from abysses and do not use on elevated objects such as tables, etc.. To prevent your device from falling,
place an obstacle in front of the abyss.
When using the device, ensure that you are within reach of the device, so that you can intervene and relocate
the device.
This appliance can be used by children aged 8 years and above, same as persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of
this appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance. The battery
must be removed from the appliance before it is scrapped. The appliance must be disconnected from the supplymains when
removing the battery. The battery must be disposed of in accordance with local regulations.
If the dust bin is full, the cleaning performance will be reduced.
Empty the dust bin after each use (see page 14).
Please clean the cli sensors and wheels regulary (see page 16).
Be careful not to break the robot cleaner when you pull it out of the box.
Install the side brushes.
The device must be fully charged before rst use.
Remove any obstacles on the oor before you start cleaning mode.
The robot cleaner can not climb thresholds higher than 10mm.
After charging is complete, keep the robot cleaner docked to the charging station.
The robot will turn o automatically.
Install the charging station in a location that can be easily accessed by the robot cleaner (1m distance to each side).
3
02
Only use the original adapter, battery and the original charging station to prevent damage to the device as well
as electric shocks, surges and/or re.
If damage occurs to the device or accessories, discontinue use of the robot and contact customer service. Never
perform any repairs yourself.
Never operate the device and any accessories with wet hands.
Warning!
Important Instructions
Before cleaning, remove
any cables and loose
objects to avoid the device
malfunctioning.
Areas of use
Wooden oors Stone oors Short and medium pile
4
If the device is not used for
several weeks, unplug the
power cable to protect the
battery.
The device can be used on the following surfaces:
carpets
Do not use the device in
damp, ammable,
explosive or corrosive
environments.
Plastic oors
03
Package content
MBOT500 robot vacuum cleaner
- Pre-assembled main brush and side brushes
- Pre-assembled dust bin and lter
Charging station Adapter Multi-functional
remote control
Cleaning brush
for cleaning the main brush
Screwdriver and
replacement screws -
for loosening/tightening
the side brushes
Replacement lter set Warranty booklet
Replacement set of
side brushes
and Quick Guide
5
04
Product description
③
①
①
②
④
②
⑤
③
⑥
⑦
④
⑤
⑥
① Upper cover
② Dust Bin
③ Dust bin button
④ Operating button
⑤ Impact strip
⑥ Signal window for obstacle sensors
⑦ Side brushes
① Charging contact
② Floor sensor / fall sensor
③ Front wheel/castor
④ Side brushes
⑤ Main brush
⑥ Drive wheel
⑦ Cover for main brushes
⑧ Nameplate
⑨ Battery cover
⑦⑧⑨
6
05
Charging station
Adaptor plug
Charging terminal
1m
1m
3m
When using the charging station,
remember that there should be a min.
clearance of 3m at the front and 1m at the sides.
Warning!
Plug in the mains adaptor. If there is a power connection,
the green LED on the top of the charging station is lit.
Make sure that
there are no loose
objects around the
charging station.
Do not place the charging
station next to a down stairway.
7
06
Remote control
Use the locking lever to remove the battery cover.
Install the AAA batteries supplied in the correct
direction and replace the cover.
Point the remote control at the robot and press
Start/Pause once to test the robot’s reaction.
If the robot beeps, a connection has been made.
The remote control’s range is 7 metres.
8
Loading...