Moneual 902 Ali User Manual
Moneual 902 Ali
User Guide
©2008 Moneual Lab Corporation
2
Please read the following safety information carefully before starting the system.
AC Power Safety Warning
The power supply is pre-set for the country/region in which you purchase the system. If you
move to another country/region, please make sure you check its voltage requirements before
plugging the system into an AC power outlet.
We recommend you use a power surge device. Do not use an extension cord.
For your safety, the power cord provided with your system has a ground plug. Always use the
power cord with a properly grounded wall outlet to avoid the risk of electrical shock.
Checking the Voltage Selection
CAUTION
Setting the voltage selection switch on the wrong voltage may damage the system.
Make sure this switch is set correctly for your location before turning the system on.
A power supply is integrated into the system to provide power to the system. The power
selection switch on the system rear panel can be used to set the power supply to operate at
115V or 230V. Slide the voltage selection switch to the correct voltage position:
• North America typically uses 115V.
• Europe typically uses 230V.
To verify that the system has the correct setting for your environment, check the voltage
selection.
BEFORE YOU BEGIN
Moneual 902 Ali User Guide 3
115V
230V
115V
BEFORE YOU BEGIN
AC Power Safety Warning
Checking the Voltage Selection
ELECTRICAL SAFETY
Operation Safety
Conventions Used in this Manual
BOX CONTENTS
GETTING FAMILIAR WITH THE SYSTEM
Front Panel
Back Panel
SETTING UP THE SYSTEM
Checklist to Set up the System
1. Select the Correct Voltage Selection for Your Area
AC Power Safety warning
Checking the Voltage Selection
2. Set the System in a Well Ventilated Area
3. Connect Video Output
4. Connect Wireless Keyboard
5. Connect Audio
Option 1: 5.1 Analog Audio Connection
Option 2: 7.1 Analog Audio Connection
Option 3: 2-Channel Audio Connection
6. Connect to Internet
7. Connect Power
8. Connect TV Input
9. Verify Audio Settings with Realtek HD Audio Manger
10 Open Windows Media Center
11. Data Loss Disclaimer
12. Limited Warranties
TABLE OF CONTENTS
3
3
3
4
4
4
6
7
7
8
10
10
10
10
10
10
11
12
12
12
13
13
14
15
16
17
18
19
19
Moneual 902 Ali User Guide 5
CAUTION
Proper ventilation is required to keep the system from overheating. Do not block
system vents or place devices directly on top of the system. If placed in a cabinet,
make sure that there is enough ventilation space behind and in front of the system.
Place the system at the bottom of the cabinet.
To prevent electrical shock, disconnect the power cord from the electrical outlet before
relocating the system.
If the power supply is broken, please consult a qualified service technician or your retailer
to avoid electrical shock hazards.
Operation Safety
Make sure that all chords are intact and correctly connected before using this product. Any
detected damage should be reported to your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots,
sockets, and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet. Place the product on a stable surface.
Contact a qualified service technician or your retailer for any technical problems with the
product.
Slots and openings are provided for ventilation; to ensure reliable operation of the product
and to protect it from overheating. These openings must not be blocked or covered. This
product should never be placed near or over a radiator or heat register.
Conventions Used in this Manual
The Caution box indicates information to prevent damage to
components during the attempt to complete a task.
NOTE The Note sign indicates important information.
* Other names and brands may be claimed as the property of others.
ELECTRICAL SAFETY
4
CAUTION
Loading...