Monessen Hearth DFS32, MCFS36, DFS36, DFS42, DFS3224 User Manual
MCFS36, DFS32, DFS3224, DFS36 and DFS42 Vent Free Gas Fireplace Systems
The Monessen Vent Free Gas Fireplace Systems provide outstanding design flexibility with the most desired product
features, for either a recessed or against the wall installation.
• Full size DFS fireplace system with 32", 36" and 42" hearth
openings
• DFS system features realistic emberblaze ceramic fiber logs
with glowing embers and dancing yellow flames
• MCFS 36" fireplace system with a 20" depth features realistic
kentucky stack log set (shown above)
•Large selection of field installed options including decorative faces
in several finishes
• Factory or field installed weathered firebrick
•Includes fixed screen, integrated burner assembly, concealed
controls, black louvers, flex connector and junction box
• New air duct design allows blower operation with radiant face
plates
• No venting required, all the heat stays in your home
Save
on Home
Heating with a
99% Heat
Efficient
Vent-Free
Fireplace
• Control options:
DFS Variable Manual, Thermostat, Remote-Ready
Millivolt and Variable Hi/Lo
MCFS Remote-Ready Millivolt
• CSA Design Certified
NEW AIR DUCT DESIGN ALLOWS BLOWER
OPERATION WITH RADIANT FACE PLATES
DFS and MCFS Systems
• Out-of-the-box ready for a circulating
installation
• Radiant plates included for easy field
conversion
• New air duct design allows blower
operations with radiant face plates
Circulating DFS Fireplace
System shown
DFS Fireplace System shown
with radiant plates
2-IN-1
FLEXIBLE FACE™
Converts from Circulating to
Radiant in Seconds!
• New air duct design allows blower operation with radiant face plate
• The DFS vent-free gas fireplace system features full size height and width builder dimensions, yet is
only 16 inches deep for those slim-profile installations.
• Monessen’s unique 2-IN-1 FLEXIBLE-FACE SYSTEM field converts from a circulating to a radiant
system in seconds, providing the ultimate in installation and design flexibility, and only three sizes
are required for virtually any installation need.
• Features a fixed safety screen, concealed controls and a modular burner system.
• Smartline designer accessories allow flexibility in customizing your fireplace through a variety of
factory or field installed options.
• There are no hot pull screens to open or close, no unsightly controls or unattractive punched
louvers.
MCFS System
Control Panel
DFS and MCFS Vent Free Gas Fireplace Systems
FACING OPTIONS
DFS shown with Brushed
Pewter Arched Front, Black
Door Frame and Black Fire
Screen Doors
DFS shown with Brushed Pewter
Arched Front, Brushed Pewter
Door Frame and Brushed Pewter
Fire Screen Doors
DFS shown with Gold Filigree
Panels, Black Door Frame and
Gold Fire Screen Doors
Vent-free gas appliances continue to be the sensible choice when looking for a supplemental heating source. Since no outside
venting is required, all the heat stays in your home and the high heating efficiency provides comfortable warmth for only pennies an hour. And since vent-free appliances do not require electricity to operate, they are an excellent heat source during
power outages. Vent free gas appliances are environmentally clean, safe, and operate within industry indoor air quality standards as well as being design certified by CSA.
MCFS shown with Black
Arched Front, Pewter Door
Frame and Black Fire Screen
Doors
MCFS shown with Gold Arched
Front, Gold Door Frame and
Gold Fire Screen Doors
The
VENT•FREE
ADVANTAGE
Loading...