Moneris SCRIBE 602, SCRIBE 612 Quick Reference Manual

SCRIBE
602/612
PRINTERS

Quick Reference Guide

0011299

Control panel.

Paper
compartment
cover.

Power switch.

Feed paper roll
end through this
slot (as indicated
by arrows).

Locking tabs
for paper
compartment
cover.

602

612

Your VISA Merchant Number is

Your MasterCard Merchant Number is

To insert
cartridge.

HOW TO REPLACE PRINTER RIBBON

1. Remove ribbon compartment cover by

pressing “lift” tab and lifting off.

2. Remove existing ribbon by first lifting left

edge of cartridge using tab provided, then
lifting right side out (as shown by the “up”
arrows in the picture at left); discard ribbon.

3. Turn tension knob on new ribbon clockwise

to remove any slack.

4. Lower right side of new ribbon into printer

so it engages the gear mechanism, then
snap left side into place (as shown by
the “down” arrows in the picture at left),
ensuring ribbon slides into ribbon slot.

5. Turn tension knob clockwise again to

remove any slack.

6. Replace cover by inserting tabs found just

above both sides of tear bar into slots next
to paper compartment cover and snapping
lift tab at bottom into place.

7. Feed paper approximately 2 inches to

ensure paper feeds properly; tear off
excess paper.

For Technical Assistance Contact

Merchant Customer Service

toll free

1-866-319-7450

or local Toronto and vicinity

416-234 -7664

To download additional copies of this Quick Reference Guide
go to www.moneris.com/merchant/qrguides
and open the PDF file scribe602/612qrg.pdf