Monarch Instrument Net 9825 User Manual

ETHERNET INFORMATION

Monarch offers an internal Ethernet connectivity solution. The
MonarchNet
printers on a network. It allows you to consistently configure your printers
through the network. You can also remotely manage and download
upgraded print batches, formats, printer configurations, and fonts.

 Ethernet Print Server makes it easy to setup and configure

The MonarchNet print server supports the Monarch
greater) or Monarch

 9825/9850 (version 1.0 or greater) printer linked to an

 9840 (version 6.5 or

Ethernet connection.
The print server supports multiple network protocols for users with

Telnet/FTP, Windows
lpr/lpd, Bootp, DHCP, and HP JetDirect

 95/98/2000 or Windows NT , TCP/IP (including

), Novell NetWare and NDS, and

SNMP. All protocols are simultaneously active.

When turning on the printer or after sending a ^PR

(printer reset) immediate command, wait at least eight (8)

seconds before sending data to the print server. Any

data sent to the print server before the 8-second interval

may be lost.

TC9840ENAD Rev. AC 3/01 1999 Monarch Marking Systems, Inc. All rights reserved.

9825,9850 and MonarchNet are trademarks of Monarch Marking Systems, Inc.
Windows and NT are registered trademarks of Microsoft in the U.S. and other countries.
NetWare is a registered trademark of Novell, Inc. in the United States and other countries.
HP Jet Admin and HP Web Jet Admin are trademarks of Hewlett-Packard, Inc.
Other products are trademarks or registered trademarks of their respective companies and are hereby
acknowledged.

Setting Up the Print Server

Upper DIP Switches

Ethernet Port

Parallel Port

Serial Port

9840 Printer Pictured

For the 9840 printer:

To use the Ethernet print server (with the 9840 printer), upper DIP switch 8
must be turned ON. This enables the bi-directional communication.

Do not plug any cables into the parallel port when using

the Ethernet port.

A printer with an Ethernet port cannot use the parallel port. However, the
serial port is still active.

For the 9825 and 9850 printer:

From the Main menu, select Setup, Port Settings, then Parallel Comm.
Then, follow these steps:

1. Press l or r until you see

PARALLEL COMM
Port r

2. Press Enter/Pause. You will see the current setting, for example

PORT
l Internal

2