Introduction 4
Product Features 5
LED Indicators 6
What’s Included 7
Wi-Fi Requirements 8
Mobile Device Requirements 8
Installation Requirements 9
Knok Installation 10
Storage Options 19
Your Dashboard 21
Do Not Disturb (DND) Controls 22
Siren Activation 23
Camera Functions 24
Watching Live Video 24
Taking Photos 25
Recording Videos 25
Audio Functions 25
Answering the Doorbell 26
Motion Detection Settings 27
2
Setting up Rules 29
Adding a New Rule 29
Mobile Alerts 30
Viewing Recorded Photos and Videos 31
Saving and Deleting recordings 31
Restoring Forgotten Passwords 32
Resetting the Device 33
Troubleshooting 34
About Momentum 35
The Knok is Wi-Fi Video Doorbell with wireless monitoring
capabilities that can be accessed from anywhere where
you have an internet connection. It’s great for surveillance
of your doorstep and to make sure you always stay in
control no matter where you are. All you need is a(n):
1. Existing wired doorbell you want to replace, or
2. Existing chime, transformer, and wiring in the
mounting area
3. Compatible mobile device (Android or iOS)
See page #8 for device requirements.
Use your smartphone and/or tablet to use and manage
the Knok with the Momentum app functions remotely.
4
Product Features
Camera Lens
IR LEDs
Light Ring
Micro-SD
card slot
Micro-USB Port
Speaker
Microphone
Reset button
Power Input Port
5
LED Indicators
The Knok displays an indicator light that lets you know
what it is doing.
Solid Red: Knok is booting up.
Double Blinking Blue: Ready to connect to Wi-Fi.
Solid Blue: Device is connected to the internet.
Blinking Blue: Device has no internet connection.
Indicator
Light Ring
6
What’s Included
A. Knok Doorbell B. Mounting Bracket
C. Security Screw D. Horizontal (15°) and
Vertical (5°) Angle Brackets
E. Drill Bit F. Long Mounting Screws (x4) and
Wall Anchors (x4)
G. Short Mounting Screws (x4) H. Power Connection Screws (x2)
I. Wire Clips (x2) J. Chime Adapter Kit
K. Double-sided Tape L. Doorbell Connection Wires
M. Leveler N. Screwdriver
O. Extra Color Case
7
Wi-Fi Requirements
The Knok requires a 2.4GHz (802.11b/g/n) for Wi-Fi
connectivity. This is available on almost any standard WiFi router.
You will need your Wi-Fi name and password when
pairing your mobile device and the Knok.
Note: If you are using a 2.4GHz + 5 GHz dual band
router, create separate SSID names for each band on
your Wi-Fi router settings page. This will make it easier for
you to select the 2.4GHz band for the device setup.
Mobile Device Requirements
The Momentum app requires a smart phone or tablet
device that runs on Android or iOS. Please see the in-app
description for device compatibility for the most up-to-date
info.
8
Installation Requirements
1. To install the Knok, you must already have an existing
doorbell you wish to replace or have a setup location
with an installed chime box, transformer, and wiring.
2. The Knok will work with most mechanical and
electronic chimes but will not work with wireless
battery power chimes.
3. Your doorbell’s transformer must be able to deliver 1624VAC and at least 10VA.
4. Installation should be performed by qualified
electricians who are informed about the standards and
technical requirements of the appliance and its proper
installation.
9
Knok Installation
Before you begin:
- Shut OFF the power for the doorbell at the fuse or circuit
breaker box.
- If you’re unsure which switch it is to turn off the doorbell’s
power, please consult with a licensed electrician.
- This equipment is intended for installation in a restricted access
location. Access can only be gained by service persons or by
users who have been instructed about the reasons for the
restrictions applied to the location and about any precautions
that shall be taken.
- If you plan to perpetually power on device, please add
appropriate disconnecting apparatus and overcurrent protection
device, outside of the device.
WARNING: Failing to shut off the power could result in a
serious injury, electrical shock, and/or risk of fire.
10
Assembly Diagram
Knok Doorbell Connections
Home’s Chime/Transformer Connections
11
Step 1: Download the Momentum App
Download and install the Momentum app on your mobile
device.
Search for Momentum on the Google Play Store for
Android devices, or on the Apple App Store for iOS
devices. You may also scan the QR code below from your
mobile device to route you directly to the app.
Make sure the app logo you download matches the one
shown below.
Create an Account
If you don’t already have a Momentum account, you will
need to create one. To create a new account, follow the
in-app instructions.
12
Loading...
+ 26 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.