Page 1
Molift Quick Raiser
sandals
EN - User manual
BM04601 Rev. D 2021-06-11
Page 2
Molift Quick Raiser sandals / BM04601/ Rev D / www.etac.com
English manual
Contents
Important .................................................................. 1
About Molift Quick Raiser sandals ..........................2
Mounting of Molift Quick Raiser sandals ................2
Important
This user manual contains important safety
instructions and information regarding the use of
the lifter and accessories.
In this manual the user is the person being lifted.
The assistant is the person operating the lifter.
Warning!
This symbol indicates important
information related to safety. Follow
these instructions carefully.
Read user manual before use!
It is important to fully understand the
content of the user manual before
attempting to use the equipment.
Declaration and warranty
CE declaration
The product, and its related accessories, described in this instruction
for use (IFU), is in compliance with
the regulation (EU) 2017/745 of 5.
April 2017 – as a medical device,
risk class I. Any serious incident
that occurs in relation to the device
should be reported to the manufacturer and the competent authority
of the Member State in which the
user and/or patient is established.
Warranty notice
Two-year warranty against defects
in workmanship and materials of our
products.
One-year warranty for batteries.
Please refer to www.etac.com for
terms and conditions.
Visit www.etac.com to download documentation to
ensure you have the latest version.
1
Page 3
Molift Quick Raiser sandals / BM04601 / Rev D / www.etac.com
Molift Quick Raiser sandals
About Molift Quick Raiser sandals
Molift Sandals is designed for use together with
Molift Quick Raiser.
Read the operator manual carefully
before use of lifter with accessories.
All safety regulations applies.
Sandals are only for minor support of
user’s feet.
User must have full control of leg
mobility.
The sandals come with velcro tape mounted on the
underside.
Remove the tape from the underside on the velcro
on the sandals.
Place the sandals on the chassis. The positioning
may vary for different users.
Mounting of Molift Quick Raiser sandals
Remove the anti-skid tape from the Quick Raiser
on which the sandals shall be mounted.
2
Page 4
Molift Quick Raiser sandals / BM04601/ Rev D / www.etac.com
Molift Quick Raiser sandals
Place the other sandal on the opposite side. Press
both sandals against the chassis to ensure they
are properly fastened.
The sandals can be removed and replaced, only the
hard side of the velcro will remain on the Molift
Quick Raiser chassis.
The sandals is now ready for use.
Etac A/S
Parallelvej 3
DK-8751 Gedved
www.etac.com
3
Loading...