MOLEX MOLEX 39000066 Datasheet

Page 1
MX10 E-57
E
Power Connectors
www.molex.com/product/power/mf.html
Mini-Fit® General Overview
The Mini-Fit Jr. was specifically developed for positive locking, wire-to-wire and wire-to-board applications. It is available in single row and dual row versions. The system offers the widest range of circuit sizes.
Mini-Fit BMI
For blind-mating applications, the Mini-Fit BMI was introduced. The receptacle housing is self-aligning and will move up to 0.050" in the x and y axes, when properly installed in a panel. The system is suitable for panel-to­panel, panel-to-board or board-to-board applications. It features wave-solderable headers, reflow-solderable headers and press-fit headers.
Mini-Fit TPA
This version of the Mini-Fit family was uniquely designed to assure that the terminals are fully seated in the receptacle and plug housings and cannot back out. The system is for positive locking, wire-to-wire and wire-to-board applications.
Mini-Fit Plus HCS
The Mini-Fit Plus HCS was designed for high current applications as it is capable of handling current loads of as much as 12.0A. The gold-plated terminals and headers are hot-pluggable; i.e., ideal for applications that require hot mating and unmating of connectors. This is the most flexible Mini-Fit system since it is offered in Mini-Fit Jr, Mini-Fit BMI and Mini-Fit TPA design formats.
Mini-Fit Plus HMC
The Mini-Fit Plus High Mating Cycle specializes in applications that require hundreds of mating cycles. It is also blind­mating. Solutions for panel-to-panel, panel-to-board and board-to-board applications exist.
Mini-Fit RTC
Mini-Fit RTC, reflow temperature capable headers were designed for use in lead free processing environments. They are made from high temperature LCP and mate with standard Mini-Fit Jr. receptacles.
Mini-Fit H2O
The Mini-Fit H2O is IP 67 rated for waterproof applications. The housings are made from a UV stable material making them suitable for outdoor applications. Mini-Fit H2O has integral seals that keep moisture and dust out. Seals are preinstalled by Molex to lower applied costs.
Family Description
Current Rating
(Smallest Circuit)
Current Rating
(Largest Circuit)
Housing Lock
Configurations
Agency Approvals
Circuit Sizes
Wire Gauge
Flammability
Mini-Fit
Plus HCS
Mini-Fit Plus HCS (High Current System) is capable of carrying up to 12A per circuit. The terminals fit in all Mini-Fit Jr, BMI, and TPA plugs and receptacles.
12A
11A
Positive or None
W-to-W W-to-B
B-to-B
Pending
2, 3, 4, 5, 6,
8, 10, 12, 14, 16, 18, 20, 22, 24
16,
18-20
94V-0
Mini-Fit
Plus HMC
Mini-Fit Plus HMC (High Mating Cycle) is capable of being mated and unmated hundreds of times and still able to provide reliable electrical connections. It is available only in the BMI format.
9A
§
6A
§
None
W-to-W W-to-B
B-to-B
Pending
4, 6, 10, 14,
18, 24
16, 18-20, 22-24
94V-0
Mini-Fit
Jr.
Mini-Fit Jr connectors are suitable for positive locking high current/high density applications.
9A
6A
Positive
W-to-W W-to-B
UL CSA TUV
2, 3, 4, 5, 6,
8, 10, 12,
14, 16, 18,
20, 22, 24
16, 18-20, 22-24
94V-2, 94V-0
Mini-Fit
TPA
Mini-Fit TPA (Terminal Position Assurance) connectors assure the terminals are fully seated in their housing and cannot back out for added reliability.
9A
6A
Positive
W-to-W W-to-B
UL CSA TUV
2, 4, 6, 8, 10, 12, 16
16, 18-20, 22-24
94V-0
Mini-Fit
BMI
Mini-Fit BMI (Blindmate Interface) connectors are designed for applications that require blind-mating of PCBs, daughtercards, or subassemblies.
9A
6A
None
W-to-W W-to-B
B-to-B
UL CSA TUV
4, 6, 10,
14,18, 24
16, 18-20, 22-24
94V-2,
94V-0
Mini-Fit
BMI (SMC)
Mini-Fit BMI (SMC) are surface mount compatible headers suitable for high temperature reflow processes. They mate to the standard Mini-Fit BMI crimp receptacle or PCB receptacle to allow blind mating.
9A
6A
None
W-to-W W-to-B
B-to-B
UL CSA TUV
4, 6, 10,
14, 18, 24
16, 18-20, 22-24
94V-0
Mini-Fit
BMI (CPI)
Mini-Fit BMI (CPI) are press fit vertical headers suitable for high temperature reflow processes. They mate to the standard Mini-Fit BMI crimp receptacle or PCB receptacle to allow blind mating.
7A
5A
None
W-to-W W-to-B
B-to-B
UL CSA TUV
4, 6, 10,
14, 18, 24
16, 18-20, 22-24
94V-0
Mini-Fit
PCIe
Mini-Fit PCIe connectors feature a unique polarization scheme so they are suitable for PCI Express* high end graphic card applications only.
8A** 8A** Positive W-to-B None 6
16, 18-24, 22-28
94V-0
Mini-Fit
RTC
Mini-Fit RTC headers can withstand high temperature solder processes. Compatible with lead free solder processes.
12.0A 11.0A Positive W-to-B Pending
4, 6, 8,
10,12, 24
16, 18-20, 22-24
94V-0
Mini-Fit
H2O
Mini-Fit H2O is IP 67 rated for weatherproof, waterproof applications.
9.0A 9.0A Positive W-to-W Pending 2 18-20 94V-0
Mini-Fit Plus Crimp Terminals: 46083 (Female) and 46134 (Male)
§
Mini-Fit High Cycle Crimp Terminals: 46018 (Female) and 46098 (Male)
Mini-Fit Plus HCS Crimp Terminals: 45750 (Female) and 46012 (Male) **Mini-Fit Crimp Terminals: 5556 (Female)
*Note: PCI Express is a registered trademark of the Peripheral Component Interchange Special Interest Group (PCI-SIG).
Page 2
E-58 MX10
E
Power Connectors
www.molex.com/product/power/mf.html
4.20mm (.165") Pitch Mini-Fit Jr
Connector System
Features
Positive Locking
Receptacle housing is equipped with a locking thumb latch. Each plug housing or header features a locking ramp. When mated, the latch and ramp prevent the connectors from accidental unmating.
Configurations
The receptacle housings, plug housings and headers allow designs for wire-to-wire or wire-to-board applications.
Polarized Mating Geometry
The receptacle housings and PCB receptacles are polarized with the plug housings and headers to minimize the chance of mismating the connectors.
Polarizing Pegs
Optional polarizing pegs orient the headers on the PCB so they are not inserted backwards and then hold the headers to the PCB during the wave soldering process.
Lead-free
Mini-Fit Jr connectors are lead-free.
MFBL
Molex offers make first, break last header options
Specifications
Current Rating: 9.0A max. (16 AWG wire) Voltage Rating: 600V Contact Resistance:
10 milliohms max. (initial)
Wire Range:
16 AWG 18 to 20 AWG
22 to 24 AWG Plating Options: Tin or Select Gold Housing Material: 6/6 nylon, UL 94V-2 or UL 94V-0 Agency Approvals: UL, CSA, TUV
Page 3
MX10 E-59
E
Power Connectors
www.molex.com/product/power/mf.html
4.20mm (.165") Pitch Mini-Fit Plus
Terminal
46083
Crimp, Female
Features and Benefits
Post-plated contacts for superior electrical performance
over time
Reliable elongated dimple which provides full and
consistent engagement between female box terminal and male pin
Reference Information
Product Specification: PS-46083-001 Application Specifications: ATS-639002600
ATS-639002800 UL File No: E29179 CSA File No: LR19980 TUV License No: R75142 Use With: 5557, 30067, 42474 and 44516 receptacles
Electrical
Current: 10.0 max. (See applicable product specification.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating Force: 14.7N max. per contact Unmating Force: 1.0N min. per contact Normal Force: 0.49N min. per contact Mating Cycles: Tin—30 cycles
Gold—100 cycles
Physical
Contact Material: Brass or Phosphor Bronze Wire Size: 16-24 AWG (See Product and Application Tooling
specifications for complete crimping guidelines.)
Base Material Plating Wire Range AWG Reel Bag Lead-free
Brass
Tin
16
46083-3111 46083-3112
Yes
18-20
46083-1111 46083-1112
22-24
46083-2111 46083-2112
30µ" Select Gold
16
46083-3211 46083-3212
18-20
46083-1211 46083-1212
22-24
46083-2211 46083-2212
Phosphor
Bronze
Tin
16
46083-3121 46083-3122
18-20
46083-1121 46083-1122
22-24
46083-2121 46083-2122
30µ" Select Gold
16
46083-3221 46083-3222
18-20
46083-1221 46083-1222
22-24
46083-2221 46083-2222
4.20mm (.165") Pitch Mini-Fit® Family Terminal
5556
Crimp, Female
Features and Benefits
Four gas-tight points of contact
Reference Information
Product Specification: PS-5556-001 Application Specifications: ATS-639002600
ATS-639002800 UL File No: E29179 CSA File No: LR19980 TUV License No: R75142 Use With: 5557, 30067, 42474 and 44516 receptacles
Electrical
Current: 9.0 max. (See applicable product specification.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating Force: 14.7N max. per contact Unmating Force: 1.0N min. per contact Normal Force: 0.49N min. per contact Mating Cycles: 30 cycles
Physical
Contact Material: Brass or Phosphor Bronze Wire Size: 16-24 AWG (See Product and Application Tooling
specifications for complete crimping guidelines.)
Contact Material Wire Size (AWG) Plating
Order No. 5556
Lead-free
Reel Bag
Brass
16
Tin
39-00-0077 39-00-0078
Yes
18-24
39-00-0038 39-00-0039
Phosphor Bronze
16
39-00-0079 39-00-0080
18-24
39-00-0059 39-00-0060
Page 4
E-60 MX10
E
Power Connectors
www.molex.com/product/power/mf.html
4.20mm (.165") Pitch Mini-Fit Plus
Terminal
46134
Crimp, Male
Features and Benefits
Post-plated contacts for superior electrical performance
over time
Locking tangs assure high contact retention to
the housing
Reference Information
Product Specification: PS-46083-001 Application Specifications: ATS-639002600
ATS-639002800 UL File No: E29179 CSA File No: LR19980 TUV License No: R75142 Use With: 5559, 42475 and 30068 plug housings
Electrical
Current: 10.0A max. (See applicable product specification.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating Force: 14.7N max. per contact Unmating Force: 1.0N max. per contact Normal Force: 0.49N min. per contact Mating Cycles: Tin—30 cycles
Gold—100 cycles
Physical
Contact Material: Brass or Phosphor Bronze Wire Size: 16-24 AWG (See Product and Application Tooling
specifications for complete crimping guidelines.)
Base Materterial Plating Wire Range AWG Reel Bag Lead-free
Brass
Tin
16
46134-3111 46134-3112
Yes
18-20
46134-1111 46134-1112
22-24
46134-2111 46134-2112
30µ" Select Gold
16
46134-3211 46134-3212
18-20
46134-1211 46134-1212
22-24
46134-2211 46134-2212
Phosphor Bronze
Tin
16
46134-3121 46134-3122
18-20
46134-1121 46134-1122
22-24
46134-2121 46134-2122
30µ" Select Gold
16
46134-3221 46134-3222
18-20
46134-1221 46134-1222
22-24
46134-2221 46134-2222
4.20mm (.165") Pitch Mini-Fit® Family Terminal
5558
Crimp, Male
Features and Benefits
Crimp terminal for use in all Mini-Fit, Jr., BMI and TPA
plug housings
Reference Information
Product Specification: PS-5556-001 Application Specifications: ATS-639002600
ATS-639002800 UL File No: E29179 CSA File No: LR19980 TUV License No: R75142 Use With: 5559, 42475 and 30068 plug housings
Electrical
Voltage: 600V Current: 9.0A max. Contact Resistance: 10 milliohms max.
Mechanical
Mating Force: 14.7N max. per contact Unmating Force: 1.0N max. per contact Normal Force: 0.49N min. per contact Mating Cycles: 30 cycles
Physical
Contact Material: Brass or Phosphor Bronze (See applicable
product specification.)
Wire Size: 16-24 AWG (See Product and Application Tooling
specifications for complete crimping guidelines.)
Contact Material Wire Size (AWG) Plating
Order No.
Lead-free
Reel Bag
Brass
16
Tin
39-00-0081 39-00-0082
Yes
18-24
39-00-0040 39-00-0041
Phosphor Bronze
16
39-00-0083 39-00-0084
18-24
39-00-0061 39-00-0062
Page 5
MX10 E-61
E
Power Connectors
www.molex.com/product/power/mf.html
4.20mm (.165") Pitch Mini-Fit Jr.™ Crimp Terminal Receptacle
5557
Single Row
Features and Benefits
Low profile design to accommodate height constraints
Fully isolated terminals to protect contacts from damage
For wire-to-wire or wire-to-board applications
Reference Information
Product Specification: PS-5556-001 UL File No: E29179 CSA File No: LR19980 TUV License No: R75142 Mates With: 5559, 5566 and 5569 single row connectors Use With: 5556, 46083 or 45750 terminals
Electrical
See Crimp Terminal page.
Mechanical
Locking: Positive
Physical
Housing: 6/6 nylon, UL 94V-2 or 94V-0
Circuits
Order No.
94V-2 94V-0
3*
39-01-4030 39-01-4031
4
39-01-4040 39-01-4041
5
39-01-4050 39-01-4051
*3-circuit receptacle designed for first-mate/last-break applications
4.20mm (.165") Pitch Mini-Fit Jr.™ Crimp Terminal Housing Plug
5559
Single Row, with and Without Panel Mount Ears
Features and Benefits
Wire-to-wire plug for panel-mounted or free-
hanging applications
Available with and without panel mounting ears
Positive housing locks to mate with Mini-Fit Jr.
receptacle
Fully isolated terminals to protect contacts
from damage
Reference Information
Product Specification: PS-5556-001 UL File No.: E29179 CSA File No.: LR19980 TUV License No.: R75142 Mates With: 5557 single row receptacles Use With: 5558, 30490, 46134 or 46012 terminals Panel Thickness: .079 to 2.00mm (.031 to 0.80")
Electrical
See Crimp Terminal page.
Mechanical
Locking: Positive
Physical
Housing: 6/6 nylon, UL 94V-2 or 94V-0
Circuits
Order No.
Panel Mount Free Hanging
94V-2 94V-0 94V-2 94V-0
3*
39-01-4032 39-01-4033 39-01-4036 39-01-4037
4
39-01-4046 39-01-4047
5
39-01-4052 39-01-4053 39-01-4056 39-01-4057
*3-circuit plug designed for first-mate/last-break applications
Page 6
E-62 MX10
E
Power Connectors
www.molex.com/product/power/mf.html
4.20mm (.165") Pitch Mini-Fit Jr.™ Header
5566
Vertical, Single Row With Pegs
Features and Benefits
Positive housing locks to mate with Mini-Fit Jr.
single row receptacle
Fully isolated terminals to protect contacts
from damage
Peg-mounted vertical headers for increased
board retention
Drain holes are standard to allow washing of PCB
after processing (contact Molex for headers without drain holes)
Reference Information
Product Specification: PS-5556-001 UL File No: E29179 CSA File No: LR19980 TUV License No: R75142 Mates With: 5557 Single row receptacles Use With: 5556 and 46083 terminals
Electrical
Current: 9.0A max. (See applicable product specification.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating Cycles: 30 cycles
Physical
Housing: 6/6 nylon, UL 94V-2 or 94V-0 Contact Material: Brass
Circuits
Order No.
Tail Length Lead-freeTin Plated Select Gold Plated (30µ")
94V-2 94V-0 94V-2 94V-0
3
39-30-5039 39-30-6030 39-30-2037 39-30-2038
3.5mm (0.14") Yes4
39-30-5049 50-30-4466 39-30-2047 39-30-2048
5
50-30-4467 39-30-2058
4.20mm (.165") Pitch Mini-Fit Jr.
Header
5569
Right Angle, Single Row With Flanges
Features and Benefits
Flanges allow for screw-in retention to board-mounted
headers
Low profile is ideal for power applications with
space constraints
Reference Information
Product Specification: PS-5556-001 UL File No.: E29179 CSA File No.: LR19980 TUV License No.: R75142 Mates With: 5557 single row receptacle Use With: 5556, 46083 and 45750 terminals
Electrical
Current: 12.0A max. (See applicable product specification.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating cycles: 30 cycles
Physical
Housing: 6/6 nylon, UL 94V-2 or 94V-0 Contact Material: Brass
Circuits
Order No.
Tail Length Lead-freeTin Plated Select Gold Plated
94V-2 94V-0 94V-2 94V-0
3
39-30-6039 39-30-7030 39-30-4037 39-30-4038
3.6mm Yes
4
39-30-6049 50-30-4443
Page 7
MX10 E-63
E
Power Connectors
www.molex.com/product/power/mf.html
4.20mm (.165") Pitch Mini-Fit Jr.™ Header
5569
Right Angle, Single Row With Pegs
Features and Benefits
Pegs provide increased board retention
Ideal for low profile power applications
Positive housing locks to mate with Mini-Fit Jr.
single row receptacles
Fully isolated terminals to protect contacts from damage
Reference Information
Product Specification: PS-5556-001 UL File No.: E29179 CSA File No.: LR19980 TUV License No.: R75142 Mates With: 5557 single row receptacles Use With: 5556, 46083 and 45750 terminals
Electrical
Current: 12.0A max. (See applicable product specificaton.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating cycles: 30 cycles
Physical
Housing: 6/6 nylon, UL 94V-2 or 94V-0 Contact Material: Brass
Circuits
Order No.
Tail Length Lead-freeTin Plated Select Gold Plated
94V-2 94V-0 94V-2 94V-0
3
39-30-7031 39-30-7032 39-30-4031 39-30-4032
3.6mm Yes4
39-30-7041 39-30-7042 50-30-4438 50-30-4441
5
39-30-7051 39-30-7052 50-30-4439 50-30-4442
4.20mm (.165") Pitch Mini-Fit Jr.
Crimp Terminal Housing Receptacle
5557
Dual Row
Features and Benefits
Positive housing lock for secure mating retention
Fully isolated terminals to protect contacts from
damage
Thumblatch for easy unmating
Reference Information
Product Specification: PS-5556-001 UL File No.: E29179 CSA File No.: LR19980 TUV License No.: R75142 Mates With: 5559, 5566, 5569, 42404, 42440, 42475,
43810, 43879 and 44068 dual row connectors
Use With: 5556, 46083 or 45750 terminals
Electrical
See Crimp Terminal page.
Mechanical
Locking: Positive
Physical
Housing: 6/6 nylon, UL 94V-2 or 94V-0
Circuits
Order No.
94V-2 94V-0
2
39-01-2020 39-01-2025
4
39-01-2040 39-01-2045
6
39-01-2060 39-01-2065
8
39-01-2080 39-01-2085
10
39-01-2100 39-01-2105
12
39-01-2120 39-01-2125
Circuits
Order No.
94V-2 94V-0
14
39-01-2140 39-01-2145
16
39-01-2160 39-01-2165
18
39-01-2180 39-01-2185
20
39-01-2200 39-01-2205
22
39-01-2220 39-01-2225
24
39-01-2240 39-01-2245
Page 8
E-64 MX10
E
Power Connectors
www.molex.com/product/power/mf.html
4.20mm (.165") Pitch Mini-Fit Jr.
Crimp Terminal Housing Plug
5559
Dual Row With and without Panel Mount Ears
Features and Benefits
Wire-to-wire plug for panel-mounted or free-
hanging applications
Positive housing locks to mate with Mini-Fit Jr.
receptacle
Fully isolated terminals to protect contacts from
damage
Reference Information
Product Specification: PS-5556-001 UL File No.: E29179 CSA File No.: LR19980 TUV License No.: R75142 Mates With: 5557 dual row receptacle Use With: 5558, 30490, 46134 or 46012 terminals Panel Thickness: .079 to 2.00mm (.031 to 0.80")
Electrical
See Crimp Terminal page.
Mechanical
Locking: Positive
Physical
Housing: 6/6 nylon, UL 94V-2 or 94V-0
Circuits
Order No.
Panel Mount Free Hanging
94V-2 94V-0 94V-2 94V-0
2
39-01-2021 39-01-2026 39-01-3023 39-01-3029
4
39-01-2041 39-01-2046 39-01-3043 39-01-3049
6
39-01-2061 39-01-2066 39-01-3063 39-01-3069
8
39-01-2081 39-01-2086 39-01-3083 39-01-3089
10
39-01-2101 39-01-2106 39-01-3103 39-01-3109
12
39-01-2121 39-01-2126 39-01-3123 39-01-3129
14
39-01-2141 39-01-2146 39-01-3143 39-01-3149
16
39-01-2161 39-01-2166 39-01-3163 39-01-3169
18
39-01-2181 39-01-3183
20
39-01-2201
22
39-01-2221
24
39-01-2241 39-01-2246
4.20mm (.165") Pitch Mini-Fit Jr.
Header
5566
Vertical, Dual Row With Pegs, with Drain Holes
Features and Benefits
Board-mounting pegs provide polarization during
placement on the PCB and increased retention during soldering process
Positive housing locks to mate with Mini-Fit Jr. receptacle
Fully isolated terminals to protect contacts from damage
Drain holes are standard to allow washing of PCB after
processing (contact Molex for headers without drain holes)
Reference Information
Product Specification: PS-5556-001 UL File No.: E29179 CSA File No.: LR19980 TUV License No.: R75142 Mates With: 5557 dual row receptacle Use With: 5556 and 46083 terminals
Electrical
Current: 19.0A max. (See applicable product specification.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating Cycles: 30 cycles
Physical
Housing: 6/6 nylon, UL 94V-2 or 94V-0 Contact Material: Brass
Circuits
Order No.
Tail Length Lead-freeTin Plated Gold Plated (30µ")
94V-2 94V-0 94V-2 94V-0
2
39-30-6027 39-30-6028 39-29-9024 39-28-9028
3.5mm Yes
4
39-30-6047 39-30-6048 39-29-9044 39-28-9048
6
39-30-6067 39-30-6068 39-29-9064 39-28-9068
8
39-30-6087 39-30-6088 39-29-9084 39-28-9088
10
39-30-6107 39-30-6108 39-29-9104 39-28-9108
12
39-30-6127 39-30-6128 39-29-9124 39-28-9128
14
39-30-6147 39-30-6148 39-29-9144 39-28-9148
16
39-30-6167 39-30-6168 39-29-9164 39-28-9168
18
39-30-6187 39-30-6188 39-29-9184 39-28-9188
20
39-30-6207 39-30-6208 39-29-9204 39-28-9208
22
39-30-6227 39-30-6228 39-29-9224
24
39-30-6247 39-30-6248 39-29-9244 39-28-9248
Page 9
MX10 E-65
E
Power Connectors
www.molex.com/product/power/mf.html
4.20mm (.165") Pitch Mini-Fit Jr.
Header
5566
Vertical, Dual Row Without Pegs, without Drain Holes
Features and Benefits
Positive housing locks to mate with Mini-Fit Jr.
receptacle
Fully isolated terminals to protect contacts from damage
Drain hole option available, contact Molex
Reference Information
Product Specification: PS-5556-001 UL File No.: E29179 CSA File No.: LR19980 TUV License No.: R75142 Mates With: 5557 dual row receptacle Use With: 5556 and 46083 terminals
Electrical
Current: 19.0A max. (See applicable product specification.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating Cycles: 30 cycles
Physical
Housing: 6/6 nylon, UL 94V-2 or 94V-0 Contact Material: Brass
Circuits
Order No.
Plating Tail Length Lead-free
94V-2 94V-0
2
39-28-1023 39-28-8020
Tin 3.5mm Yes
4
39-28-1043 39-28-8040
6
39-28-1063 39-28-8060
8
39-28-1083 39-28-8080
10
39-28-1103 39-28-8100
12
39-28-1123 39-28-8120
Circuits
Order No.
Plating Tail Length Lead-free
94V-2 94V-0
14
39-28-1143 39-28-8140
Tin 3.5mm Yes
16
39-28-1163 39-28-8160
18
39-28-1183 39-28-8180
20
39-28-1203 39-28-8200
22
39-28-1223 39-28-8220
24
39-28-1243 39-28-8240
4.20mm (.165") Pitch Mini-Fit Jr.
Header
5569
Right Angle, Dual Row with Pegs
Features and Benefits
Board mounting pegs provide polarization during
placement on PCB and increased board retention during solder processing
Low profile for space constraints
Positive housing locks
Fully isolated terminals to protect contacts
from damage
Reference Information
Product Specification: PS-5556-001 UL File No.: E29179 CSA File No.: LR19980 TUV License No.: R75142 Mates With: 5557 dual row receptacles Use With: 5556, 46083 and 45750 terminals
Electrical
Current: 12.0A max. (See applicable product specification.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating Cycles: 30 cycles
Physical
Housing: 6/6 nylon, UL 94V-2 or 94V-0 Contact Material: Brass
Circuits
Order No.
Tail Length Lead-freeTin Plated Select Gold Plated (30µ")
94V-2 94V-0 94V-2 94V-0
2
39-30-7025 39-30-7026 39-30-0023 39-30-0024
3.6mm Yes
4
39-30-7045 39-30-7046 39-30-0043 39-30-0044
6
39-30-7065 39-30-7066 39-30-0063 39-30-0064
8
39-30-7085 39-30-7086 39-30-0083 39-30-0084
10
39-30-7105 39-30-7106 39-30-0103 39-30-0104
12
39-30-7125 39-30-7126 39-30-0123 39-30-0124
14
39-30-7145 39-30-7146 39-30-0143 39-30-0144
16
39-30-7165 39-30-7166 39-30-0163 39-30-0164
18
39-30-7185 39-30-0183
20
39-30-7205 39-30-7206 39-30-0203 39-30-0204
22
39-30-7225
24
39-30-7245 39-30-7246 39-30-0243 39-30-0244
Page 10
E-66 MX10
E
Power Connectors
4.20mm (.165") Pitch Mini-Fit Jr.
Header
5569
Right Angle, Dual Row With Flanges
Features and Benefits
Flanges allow for screw-in retention to
board-mounted header
Low profile for space constraints
Positive housing locks
Reference Information
Product Specification: PS-5556-001 UL File No.: E29179 CSA File No.: LR19980 TUV License No.: R75142 Mates With: 5557 dual row receptacles Use With: 5556, 46083 and 45750 terminals
Electrical
Current: 12.0A max. (See applicable product specification.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating Cycles: 30 cycles
Physical
Housing: 6/6 nylon, UL 94V-2 or 94V-0 Contact Material: Brass
Circuits
Order No.
Plating Tail Length Lead-free
94V-2 94V-0
2
39-29-1028 39-29-1027
Tin 3.5mm Yes
4
39-29-1048 39-29-1047
6
39-29-1068 39-29-1067
8
39-29-1088 39-29-1087
10
39-29-1108 39-29-1107
12
39-29-1128 39-29-1127
Circuits
Order No.
Plating Tail Length Lead-free
94V-2 94V-0
14
39-29-1148 39-29-1147
Tin 3.5mm Yes
16
39-29-1168 39-29-1167
18
39-29-1188 39-29-1187
20
39-29-1208 39-29-1207
22
39-29-1228 39-29-1227
24
39-29-1248 39-29-1247
4.20mm (.165") Pitch Mini-Fit Jr.
Wire-to-Board Header
87427
Vertical without Flanges High Temperature Material
Features and Benefits
Molded in high temperature, surface mount
compatible material
Fully isolated terminals to protect contacts
from damage
Reference Information
Product Specification: PS-87427-0001 UL File No.: E29179 CSA File No.: LR19980 Mates With: 5557 dual row receptacles Use With: 5556, 46083 and 45750 terminals
Electrical
Current: 12.0A max. (See applicable product specification.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating Cycles: 30 cycles
Physical
Housing: 4/6 Nylon, UL 94V-0 Contact Material: Brass
Circuits
Order No.
Tail Length Lead-free
Tin Over
Nickel Plating
Tin Over
Copper Plating
2
87427-0242 87427-0243
3.3mm Yes
4
87427-0442 87427-0443
6
87427-0642 87427-0643
8
87427-0842 87427-0843
10
87427-1042 87427-1043
12
87427-1242 87427-1243
Circuits
Order No.
Tail Length Lead-free
Tin Over
Nickel Plating
Tin Over
Copper Plating
14
87427-1442 87427-1443
3.3mm Yes
16
87427-1642 87427-1643
18
87427-1842 87427-1843
20
87427-2042 87427-2043
22
87427-2242 87427-2243
24
87427-2442 87427-2443
www.molex.com/product/power/mf.html
Page 11
MX10 E-67
E
Power Connectors
www.molex.com/product/power/mf.html
4.20mm (.165") Pitch Mini-Fit Jr.
Wire-to-Board Header
87427
Right Angle without Flanges High Temperature Material
Features and Benefits
Molded in high temperature, surface mount
compatible material
Fully isolated terminals to protect contacts
from damage
Reference Information
Product Specification: PS-87427-0001 UL File No.: E29179 CSA File No.: LR19980 Mates With: 5557 dual row receptacle Use With: 5556, 46083 and 45750 terminals
Electrical
Current: 12.0A max. (See applicable product specification.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating Cycles: 30 cycles
Physical
Housing: Nylon 4/6, UL 94V-0 Contact Material: Brass
Circuits
Order No.
Tail Length Lead-free
Tin Over
Nickel Plating
Tin Over
Copper Plating
2
87427-0202 87427-0203
3.3mm Yes
4
87427-0402 87427-0403
6
87427-0602 87427-0603
8
87427-0802 87427-0803
10
87427-1002 87427-1003
12
87427-1202 87427-1203
Circuits
Order No.
Tail Length Lead-free
Tin Over
Nickel Plating
Tin Over
Copper Plating
14
87427-1402 87427-1403
3.3mm Yes
16
87427-1602 87427-1603
18
87427-1802 87427-1803
20
87427-2002 87427-2003
22
87427-2202 87427-2203
24
87427-2402 87427-2403
4.20mm (.165") Pitch Mini-Fit Jr.
Wire-to-Board Header
87427
Right Angle with Flange High Temperature Material
Features and Benefits
Molded in high temperature, surface mount compatible
material
Fully isolated terminals to protect contacts from damage
Reference Information
Product Specification: PS-87427-0001 UL File No.: E29179 CSA File No.: LR19980 Mates With: 5557 dual row receptacle Use With: 5556, 46083 and 45750 terminals
Electrical
Current: 12.0A max. (See applicable product specification.) Voltage: 600V Contact Resistance: 10 milliohms max.
Mechanical
Mating Cycles: 30 cycles
Physical
Housing: 4/6 Nylon, UL 94V-0 Contact Material: Brass
Circuits
Order No.
Tail Length Lead-free
Tin Over
Nickel Plating
Tin Over
Copper Plating
2
87427-0212 87427-0213
3.3mm Yes
4
87427-0412 87427-0413
6
87427-0612 87427-0613
8
87427-0812 87427-0813
10
87427-1012 87427-1013
12
87427-1212 87427-1213
Circuits
Order No.
Tail Length Lead-free
Tin Over
Nickel Plating
Tin Over
Copper Plating
14
87427-1412 87427-1413
3.3mm Yes
16
87427-1612 87427-1613
18
87427-1812 87427-1813
20
87427-2012 87427-2013
22
87427-2212 87427-2213
24
87427-2412 87427-2413
Loading...