Ear muffs "M Series"
The Moldex "M Series" range of ear muffs
M1 (6100)
·
M2 (6200)
·
Characteristics
The Moldex "M Series" ear muffs are ideal to protect from intermittent
noise - or for those who cannot achieve a safe and comfortable fit with
earplugs. Both muffs are made out of SoftCoat® material with exclusive
iridescent colours.
All Moldex hearing products have been designed with the user in mind.
High levels of comfort have been engineered into the products without
compromising the optimal protection.
Construction / Materials
Moldex ear muffs and hygiene kit are made of the following materials:
M1 (6100): - Cup = Polypropylene, TPE
- Cup-foam = Polyurethane
- Cushion foam = Polyurethane
- Cushion = Polyurethane, TPE
- Cup yoke = Polyacetale
- Head band = Steel
- Head band cushion = Polyurethane, TPE
M2 (6200): - Cup = Polypropylene, TPE
- Cup-foam = Polyurethane
- Cushion foam = Polyurethane
- Cushion = Polyurethane, TPE
- Head band = Polyacetale
Hygiene kit (6105)
·
Attenuation Data
The Moldex "M Series" range of ear muffs passes the EN 352 minimum
attenuation requirements set out in the table below. The A.P. V. values (MfSf) of the ear muffs must exceed the data in the table.
Minimum attenuation requirement (dB)
Freq. (Hz) 63 125 250 500 1000 2000 4000 8000
A.P.V (dB) - 5.0 8.0 10.0 12.0 12.0 12.0 12.0
Below is the attenuation data table for ear muff "M1" (6100).
M1 (6100)
Freq. (Hz) 125 250 500 1000 2000 4000 8000
Mf (dB) 17,1 21,7 33,1 40,6 34,9 37,0 37,0
sf (dB) 2,8 2,7 3,8 3,1 5,4 5,1 5,3
A.P.V (dB) 14,3 19,0 29,3 37,5 29,5 31,9 31,7
Size: S/M/L SNR = 31 dB H = 31 M = 29 L = 21
The full attenuation data tables for the Moldex ear muff "M2" (6200) is
presented below. The "M2" can be worn in three positions. On head,
behind neck or under chin in conjunction with head protection.
Weights: M1 (6100): 383 g
M2 (6200): 294 g
Certification
The Moldex "M Series" range of ear muffs meet the requirements of
EN352 and are CE-Marked in accordance with the requirements of
European Directive 89/686/EEC.
The BGIA in St. Augustin in Germany is the body responsible for type
examination (Article 10) of M2 (6200). Ear muff M1 (6100) is certified
by FIOH (0403) in Helsinki (Finland).
The products are manufactured in an ISO 9001 certified plant.
Testing
The "M Series" ear muffs have been tested to EN 352 and fulfill all
requirements of the relevant categories.
Ignitability
·
The ear muffs will not ignite upon application of a heated rod, nor
continue to glow after the removal of the heated rod.
Construction
·
Technical Data Sheet
HEM - UK / 02-2008
All parts of the ear muffs are designed and manufactured so that they
are not liable to cause physical damage to the wearer when fitted and
used according to the instructions.
A - on head B - under chin C - behind neck
A
M2 (6200):
Freq. (Hz) 125 250 500 1000 2000 4000 8000
Mf (dB) 12,8 20,8 28,0 35,2 34,1 36,8 36,5
A
Sf (dB) 3,7 3,0 2,9 4,2 4,2 3,2 7,1
A.P.V (dB) 9,1 17,8 25,1 31,0 29,9 33,6 29,4
Size: M/L SNR = 28 dB H = 31 M = 26 L = 17
M2 (6200): B - M2 under chin
Freq. (Hz) 125 250 500 1000 2000 4000 8000
Mf (dB) 14,4 22,4 29,4 34,8 36,3 39,5 40,7
B
Sf (dB) 4,9 3,9 3,1 2,3 3,6 3,3 2,6
A.P.V (dB) 9,5 18,5 26,3 32,5 32,7 36,2 38,1
Size: M/L SNR = 30 dB H = 35 M = 27 L = 17
M2 (6200): C - M2 worn behind neck
Freq. (Hz) 125 250 500 1000 2000 4000 8000
Mf (dB) 12,8 20,1 27,2 33,0 34,5 36,8 36,1
C
Sf (dB) 4,4 3,5 4,1 3,5 3,8 4,8 5,8
A.P.V (dB) 8,4 16,6 23,1 29,5 30,7 32,0 30,3
Size: M/L SNR = 27 dB H = 31 M = 25 L = 16
- M2 worn on head
Ear muffs "M Series"
+
-
+
-
Instructions For Use
The ear muffs must be used in accordance with the relevant national
·
legislation, and fitted, adjusted and maintained according to the user
instructions.
Warning: Disregarding the user and fitting instructions for these
·
products can affect the product efficiency in protecting against noise.
Check the ear muffs and cushions before use. Change them if they are
·
damaged.
Ear muffs, and in particular cushions, may deteriorate with use and
·
should be examined at frequent intervals, for cracking and leakage for
example.
Products should be stored in a cool, non-contaminated and dry
·
environment. They should not be exposed to direct sunlight or heat.
The products may be adversely affected by direct contact with certain
·
chemical substances (e.g. aromatic hydrocarbons).
Ear muffs are reusable provided the hygiene of the product is
·
maintained between uses. Clean with mild soap and water.
We suggest replacing cushions and inserts from the hygiene kit every
·
6 months. This will ensure optimum levels of comfort and protection
are maintained. The fitting of "hygiene covers" to the cushions may
affect the acoustic performance of the ear muffs.
Instructions for fitting: M1 (6100)
1.
When putting on the ear muff, the
headband needs to be positioned in
the middle of the head and the
cushions need to cover the ears.
Instructions for fitting: M2 (6200)
Please note: In Conjunction with head protection M2 can be worn under
chin (B) or behind neck (C).
(A)
1.
(B)
(C)
2.
(A) M2 on head: When putting on the
ear muff, the headband needs to be
positioned in the middle of the head and
the cushions need to cover the ears.
(B) M2 under chin: When putting on
the ear muff with the headband under
chin, the black/flexible strap needs to be
inserted in the loop on the top of the cups
(see: a + b) and position the strap in the
middle of the head.
The cushions need to
cover the ear.
(C) M2 behind
neck: When
putting on the ear
muff with the
headband behind
neck, the black/
flexible strap needs
to be inserted in the loop on the top of the
cups (see: a + b) and position the strap
in the middle of the head. The cushions
need to cover the ear.
The position of the cup can be changed
by moving the headband.
(a)
(b)
2.
3.
MOLDEX-METRIC AG & Co. KG Tel.:+44 (0)115 985 4288
Unit 9, Glaisdale Point, Fax:+44 (0)115 985 4211
Off Glaisdale Drive, Bilborough, www.moldex-europe.com
Nottingham. NG8 4GP info@uk.moldex-europe.com
The position of the muff can be
changed by moving the headband.
The cushions must be close to the
head. No parts such as glasses
sidepieces or headstraps from a
respirator must be placed between
the head and the pads.
If the M2 is worn behind the neck, select
the smallest head band size.
Instructions for fitting: Hygiene kit (6105)
1.
INFO: For help on selection and training please
contact us. We offer a wide range of training
packages and support material.
The foam inserts and cushions are
detachable and can be replaced by spare
parts from the "hygiene kit" (product
Number 6105).
Technical Data Sheet
HEM - UK / 01-2005
Loading...