01
TM
User Guide
BassPop
Pocket Bluetooth Speaker
02
About/Contents 04
Overview 05
Cable Features/Recharge 06
Operating Instructions 07
Pair and Play via Bluetooth 07
Button Controls 08
Handsfree Calls 08
Play via Audio Cable 09
Volume Control 10
Caution/Specifications 11
04
MOKI
BASSPOP
POCKET
BLUETOOTH
SPEAKER
BassPop is the ultra-compact Bluetooth wireless
pocket speakerphone from Moki. Using the latest in
passive bass technology, the BassPop delivers sound
like no other while still fitting in the palm of your hand.
A powerfully ecient 2W main speaker produces
the higher frequencies, while a passive bass radiator
delivers a true low end response. A handy Velcro strap
lets you attach the BassPop to almost anything, giving
you music on the go and the ability to safely take
handsfree calls.
CONTENTS
• BassPop Pocket Bluetooth® Speaker
• Recharge Cable - MicroUSB to USB
• Audio Cable - 3.5mm to 3.5mm
• User Guide
05
A Volume up
B Volume down
C On/O
D Play/pause-
during music,
Answer/hang up during phone call
E LED indicator
F MicroUSB charge port
G 3.5 mm input (AUX IN)
H Microphone
I Passive bass
J Speaker driver
3.5mm input
(AUX IN)
Microphone
LED indicator
(Bluetooth)
MicroUSB
charge port
Front
Passive bass
Speaker driver
Volume down
On/O
Play/pause
Answer/
hang up
Side
Back
OVERVIEW
Volume up
A
B
C
D
E
F
G
H
I
J
06
CABLE
FEATURES
RECHARGE
1. Play music - 3.5 mm - 3.5 mm cable -
attach to AUX-IN and play device.
2. Recharge - attach MicroUSB to BassPop
for recharge.
• Insert MicroUSB plug into BassPop.
• Insert standard USB plug into a port on PC / laptop
or USB wall / car adaptor (not included).
Charge approximately 3 hrs.
• LED will glow red when battery is recharging.
• When battery reaches full capacity LED will turn o.
07
Connecting a Bluetooth device for the first time
To pair and connect
1. Place the BassPop and your Bluetooth device
within one metre of each other.
2. On your device, turn ON Bluetooth and scan.
3. On the BassPop press and hold the power
( ) button for 1-2 seconds until you hear the
start-up chime beep and see the LED quickly
flash red / blue, indicating BassPop is
searching for a Bluetooth device to connect with.
4. After a few seconds “BassPop” should appear
listed under available devices. Select it to connect.
OPERATING
INSTRUCTIONS
Bluetooth and associated call functions will only operate
when there is no cable connected to the 3.5 mm AUX-IN
socket of the BassPop.
Pair and play via Bluetooth
Note:
Only one Bluetooth audio player or phone may connect to the
BassPop at a time. If you have a problem connecting, check that
no other previously paired devices are reconnecting automatically.
To re-scan simply turn BassPop power o, wait five seconds and
turn power back on.
08
Button controls
Handsfree calls
When an incoming call is received you will hear
the ringtone through the BassPop speaker.
• To answer incoming call press ( ) once.
• To hang up a call press ( ) again.
Moki BassPop has a simple control panel for
adjusting basic playback and call functions
directly from the speaker.
• Press “PLAY / PAUSE” ( ) button once to
commence audio playback.
• Press “PLAY / PAUSE” ( ) button again to pause.
• Press or hold (
) button to reduce playback
volume to desired level.
• Press or hold (
) button to increase volume to
desired level.
OPERATING
INSTRUCTIONS
(continued)
Note:
The BassPop will scan for new Bluetooth devices or will reconnect
to the last paired device if it is close by. You may be required to
enter passkey “0000” if requested depending on the Bluetooth
version of your device.
09
Play via audio cable
1. Insert 3.5 mm (
1
/ 8 in) audio plug into the
“AUX IN” socket on BassPop.
2. Insert opposite end into your audio player’s
headphone socket.
3. Turn on BassPop by pressing left button ( )
on the base control.
4. Play music and adjust volume using
player controls.
5. Volume can be adjusted on BassPop and/or via
the connected audio player.
Note:
Bluetooth and play / pause functions will have no use when
connected via 3.5 mm audio cable.
10
Note:
Because the in-built microphone is close to the speaker it has
custom noise cancellation processing designed to reduce noise
interference and echo feedback. If a caller has trouble hearing you
please ensure the microphone is facing toward you or position
yourself closer to the BassPop.
1. To increase volume, hold ( ) button for
5-10 seconds until desired volume is reached.
(Audio player volume should also be set at an
appropriate level).
2. To decrease volume hold control ( ) button for
5-10 seconds until desired volume is reached.
Volume control
OPERATING
INSTRUCTIONS
(continued)
Volume will aect playtime. For longer playtime set
your player volume to high and decrease the BassPop
volume to desired level.
11
• Do not dispose of BassPop in fire or expose to
excessive heat.
• Do not store or recharge in damp or high
temperature areas.
• Do not open or insert anything into BassPop body.
• Do not attempt to disassemble.
• Do not apply excessive force to cables or
connection points.
• Please keep out of reach of young children and pets.
CAUTION
Model: ACC BPOP
Power Output: 2 W
Speaker Driver: Ø 30 mm (1.18 in)
Sensitivity: => 85 dB
Frequency Response: 20 Hz - 15 kHz
Bluetooth Version: 2.1
Charge Time: ~ 3 hrs via USB
Play Time: ~ 6 hrs
Dimensions: W 55 mm x H 80 mm x D 25 mm
( W 2.1 in x H 3.1 in x D 1 in)
Operating / Recharge Temp: 0˚C ~ 45˚C
(32˚F ~ 113˚F)
Weight: 200 g (7.1 oz)
SPECIFICATIONS
013
014
mokiinternational.com
Moki International all rights reserved
Made in China
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by Moki is under license.
Other trademarks and trade names are those of their respective owners.
TM
Loading...