Moki ACC-MBBT User Manual

OVERVIEW AND CONTENTS

• BassBarrel Bluetooth® Speaker

• USB - Micro USB Recharge Cable

Front

A

Top speaker

B

Bass speaker

C

Volume down

D

Volume up

E

Previous track

F

Next track

CABLE FEATURES

USB recharge cable

2 x standard USB to Micro USB1.

Audio cable

3.5 mm to 3.5 mm (1⁄8 in) audio plug2.

RECHARGE

•

To enable faster charge times the BassBarrel has included a USB “Y” cable
that can draw power from 2 USB ports at the same time. Insert one or both
USB plugs into separate ports on PC or USB wall adaptor.

•

Insert Micro USB plug into Micro USB port on the BassBarrel

•

LED will glow red while battery is being recharged.

•

LED will glow blue when battery reaches full capacity

G
H

I

J

• 3.5mm Audio Cable

• User Guide

CONTROL PANEL

USB

AUX-IN

CHARGING

Back

SD/MMC

USB

LED

CARD PORT

CHARGING

K

Standard USB reader/Powerbank

L

SD/MMC card reader

M

LED indicator

N

S-shaped bass vent

Side Side

Phone control via Bluetooth
Power ON/OFF

3.5mm auxiliary input (AUX IN)
Micro USB recharge port

OPERATING INSTRUCTIONS

Play via 3.5mm audio cable

1.

Insert 3.5 mm (1⁄8 in) audio plug into “AUX-IN” socket on BassBarrel.

2.

Insert opposite end into your audio player’s headphone socket.

3.

Turn on BassBarrel.

4.

Play music and adjust volume using player controls.

ON /OFF

Note: Using the audio cable will override Bluetooth function and BassBarrel
control buttons will have no use.

Pair and play via Bluetooth

1.

Place BassBarrel and a Bluetooth device within one metre.

2.

Enable Bluetooth on your device and “scan” under Bluetooth settings.

3.

Hold down “ON” button on your BassBarrel for 2 seconds.

4.

The BassBarrel will scan for new Bluetooth devices to pair with.
(LED will quickly blink blue). After a few seconds “MOKI BASSBARREL”
should be listed under available devices.

5.

Select it to connect. (Enter passkey “0000” if requested).

6.

LED will blink slowly indicating pairing was successful.

7.

Select song on device and press play. Playback may be controlled via device
or directly from the BassBarrel control panel.

Note: If pairing is not successful turn BassBarrel o, wait 10 seconds and turn
back on. Attempt pairing process again (away from other Bluetooth devices).