MOJOGEAR W64 User Manual

Before use

How to install the suction cup

How to adjust the direction

How to to remove the suction cup

W64 MULTI COLOR

MINI LED KIT

SUCTION CUP

With the suction cup, you can easily
mount your LED light to a laptop,
monitor or other surface.

The suction cup is only included with
the KIT version of this LED light.

W64 MULTI COLOR

MINI LED LIGHT

+ KIT

MANUAL

Before applying the
suction cup, remove
the plastic film.

The suction cup works
best on flat and
smooth surfaces.

For extra grip, stick the
included double-sided
sticker on the surface,
before you attach
the suction cup.

Introduction

Thank you for purchasing this MOJOGEAR W64 Multi
Color Mini LED light. We hope it will help you to unleash
your creativity and create better videos.

If you have any questions or feedback, please let us know
at [e-mail]. We’d love to hear from you!

Safety instructions

Do not use the light near explosive gases or

•

flammable materials.
Do not burn or incinerate the product.

•

Do not expose the lamp to excessive heat, such as

•

direct sunlight or fire. The product should not be used
when the temperature is above 40°C.

This product is not fully waterproof. Please pay

•

attention when using in wet conditions.
Do not charge the light in damp or wet conditions.

•

Keep out of reach of children.

•

Battery instructions

This product contains a rechargeable lithium battery.

•

To charge the battery, please use a suitable charger.
Rechargeable lithium batteries have a limited lifespan.

•

Over time, the capacity of the battery will decrease.
If you haven’t used the product for a long time, please

•

charge the battery before using the product.
To extend the lifespan of the battery, it’s recommended

•

to charge the light once every three months.

Package contents

LED light

Buttons and parts

W64

2500K~ 6500K

Capaci ty: 200 0mAh

Cold shoe mount (3x)
Power button
Battery indicator
USB-C charging port

Open the lock on
the suction cup.

Firmly press the suction
cup against the surface.
Close the lock.

Screw the LED light onto
the 1/4" screw on top of
the suction mount.

Use the ring to secure
the light.

USB-C

charging cable

Cold shoe base
Color temperature adjustment
Brightness adjustment

KIT only:

Suction cup

Turn the knobs on
the suction cup to
adjust the angle of
the light.

Tighten the knobs
to prevent the light
from moving
during use.

How to use

Power button

Left knob (CT) adjusts color temperature

Right knob (DIM) adjusts brightness

Hold for 2 seconds to turn on/off

Turn the wheel to adjust the
color tempature (from 2500K to 6500K)

Turn the wheel to adjust the
brightness

Product Specifications

Color temperature

Brightness

Color rendering index

Brightness adjustment range

Maximum power consumption

Battery capacity

Input

Dimensions

Weight

2500K–6500K

850 lux @ 0.3m

≥90

– 100%

0

6W

2000 mAh

USB-C

71 x 84 x 25 mm

94 g

Open the lock on
the suction cup.

Gently pull at the
tip of the suction
cup.

Remove the
suction cup from
the surface.

When not in use, cover
the suction cup with
plastic film, to prevent it
from getting dirty.

If needed, the suction
cup can be cleaned with
water.

Warranty

All MOJOGEAR products are covered by a
2-year warranty, calculated from the date of purchase.

MOJOGEAR creates high-quality products for
smartphone filmmakers, mobile journalists and
everyone else who wants to get the most out of
their phone or camera.

MOJOGEAR is proudly based in The Netherlands.

If you have any questions or feedback, please
let us know at [e-mail].
We’d love to hear from you!