Moffat, Inc. M2 General Manual

Passthrough Dishwashers

Technical data sheet for

M2

High Performance
Passthrough Dishwasher

W 705mm x D 765mm x H 1530mm

P Series

M2

The M2 washes up to 1000 plates per hour
and is ideal for most restaurants - the market
leading unit for passthrough dishwashers.

Standard Features

• Stainless steel arms with removable

end caps for cleaning

• 430mm high wash chamber clearance

• Robust stainless steel construction

• Electromechanical controls

• Auto start on door closure

• Anti-drip door edge channels water

away from operator

• Adjustable and removeable tilting rack slide

• Full length door springs allow

fingertip lifting with tension of 2kg

• 220mm leg clearance for access

beneath machines

• Corner or in-line installation

• Watermark certified

• 2.6 litres per cycle water consumption

• Up to 1000 plates per hour

• Powerful rinse booster elements ensure

fast recovery between cycles - up to 55

cycle per hour capacity

• 750W wash pump recirculates wash

water at nominal 350 litres per minute

through upper and lower wash arms

• 5kW rinse and 2.5kW rinse heating

• Triple cycle selection - 1, 2 or 3 minute cycles

• Double filtration via scrap trays and

separate wash inlet filter

• L-shaped tank with curved corners

• Suits 500mm international standard racks

• Fits 650mm deep bench for in-line

installation - 700mm in corner application

Accessories

• 2 x 500mm Dish Rack s

• 1 x 500mm Cup Rack

• 2 x Cutlery Containers

The unit shall be a Washtech pass-through dishwasher with Watermark certification, suitable for in-line or corner installation. The unit shall have automatic fill and low
level pump and element protection and start automatically on door closure. It shall be fitted with operator selectable one, two and three minute complete operating
cycles. Door clearance shall be 430mm. The unit shall be fitted with rotating upper and lower all stainless steel separate wash and rinse arms, all with removable end
plugs for cleaning, and height adjustable tilting rackslide. Hot water consumption shall be 2.6 litres per operating cycle. The unit shall be suitable for connection to either
25amp single phase or 15amp 3 phase 5 wire electrical supply. The unit shall be supplied with 500mm cup and dishracks and shipped in 100% recyclable packaging.
Height of machine shown includes height with maximum 60mm adjustable leg option in use.

M1

Passthrough Dishwashers

P Series

M2

Australia

www.moat.com.au

New Zealand

www.moat.co.nz

Australia
Moat Pty Limited

Victoria/Tasmania
740 Springvale Road
Mulgrave, Victoria 3170
Telephone [phone]
Facsimile 03-9518 3833
vsales@moat.com.au
www.moat.com.au

New South Wales
Telephone [phone]
nswsales@moat.com.au

South Australia
Telephone [phone]
vsales@moat.com.au

Queensland
Telephone [phone]
qldsales@moat.com.au

Western Australia
Telephone [phone]
bgarcia@moat.com.au

New Zealand
Moat Limited
Christchurch
16 Osborne Street
Christchurch 8011
Telephone [phone]
Facsimile [phone]
Auckland
Telephone [phone]
export@moat.co.nz
www.moat.co.nz

A

B

C

Hot Water

Waste

Electrical

Dimensions

Width
Depth
Height
Weight

temperature
connection
pressure
flow
quality

connection
line

single phase 240V 50Hz
OR 3 phase 415V 50Hz

Refer operator manual for complete installation instructions.

705mm
765mm
1530mm
97kg

65C
3/4”
200-350 kPa
20 litres per min
potable & soft

1.5 BSP
2” BSP

25 amp
15 amp

Packed Dimensions

Width
Depth
Height
Weight
Cubicmetres

760mm
810mm
1450mm
120kg

0.9m³
© Copyright Moffat Ltd

Moffat /1175 / 8.10