Moffat RN8610GE, RN8613GE, RN8616GE, RN8619GE User Manual

Technical data sheet for
GAS RANGE ELECTRIC STATIC OVEN 900mm
RN8610GE, RN8613GE, RN8616GE, RN8619GE
Heavy-duty construction
28 MJ/hr open burners
Flame failure standard
Pilot burners optional
Optional simmer plates
GN 2/1 6.5kW electric static oven
Drop down door
Stainless steel exterior
Easy clean
Easy service
Fully modular
RN8610GE
Overall Construction
• Galvanized steel chassis
• Welded hob with 1.5mm 304 stainless steel bull nose
• Splashback and hob sides 1.2mm 304 stainless steel
• Front panels and oven sides 0.9mm 304 stainless steel
• 150mm legs in 63mm dia. heavy-duty 1.2mm 304 stainless steel with adjustable feet
Cooktop
• Cast iron 28MJ/hr open burners with forged brass cap
• Vitreous enamelled cast iron potstands
• Vitreous enamelled open burner spill covers
• Cast iron simmer plates (optional extra)
• 12mm thick mild steel griddle plates
• 2.5mm 304 stainless steel griddle splash guards
• Vitreous enamelled spill trays
• Aluminised steel internal construction Griddle sections are standard on RH side. Available on LH side or
centre to order or by conversion.
Oven
• Fully welded and vitreous enamelled oven liner
• GN 2/1 capacity with 4 position racking
• Heavy-duty easy remove heavy wire chrome rack supports
• Cast iron even heat oven sole plate
• 6.5kW heating elements
• Welded frame drop down door with heav y-duty spring hinge system
• 0.9mm 304 stainless steel door outer
• 1.0mm press formed vitreous enamelled door inner
• 50mm high density fibreglass insulated
• Stay cool stainless steel door handle with cast metal handle mounts
• Supplied with two chrome wire oven racks
Controls
• Large easy use control knob - heat resistant reinforced
• Easy view control settings on knob
Cooktop
• Variable high to low controls to open burners
• Open burners flame failure standard with pilot burners optional
• Variable high to low controls to griddles
• Griddles standard with pilot, flame failure and piezo ignition
Oven
• Separate temperature and top heat power regulation controls
• 50-320˚C thermostatic control
• Lo-Hi top heat control
• Indicator lights for power and heating
Cleaning and Servicing
• All models with easy clean stainless steel external finish
• Lift off burners heads and vitreous enamelled burner spill covers
• Vitreous enamelled spill trays under open burner and griddle sections
• Removable oven racking and sole plate
• Easy clean vitreous enamel oven and door inner
• Door hinge spring adjustable on unit (door outer removed)
• Door disengages for lift off removal and increased service access
• All parts front accessible from installed position
• Access to all parts from front of unit
Technical data sheet for
GAS RANGE ELECTRIC STATIC OVEN 900mm
Specifications
Burners
Open Burners 28M J/hr dual flame ring with simmer rate
Griddle Burners 20M J/hr per 300mm section
Oven Elements
4.5kW bottom heat element
2.0kW top heat element
Gas power
RN8610GE 168 MJ/hr, 46.6kW RN8613GE 132 MJ/hr, 36.6kW RN8616GE 96 MJ/hr, 26.6kW RN8619GE 60 MJ/hr, 16.6kW
Electrical requirements
6.5kW
1 phase connec tion:
230-240Vac, 50/60hz, 1P+N+E, 27A
3 phase connec tion:
400-415Vac, 50/60hz, 3P+N+E L1 9.4A L2 9.4A L3 8.3A
Griddle Plate
300mm Griddle cooking surface 292mm x 475mm, 1387cm2
600mm Griddle cooking surface 592mm x 475mm, 2812cm2
900mm Griddle cooking surface 892mm x 475mm, 4237cm2
Oven Dimensions
Width 665mm Depth 590mm Height 385mm Rack size 660mm x 540mm Rack positions 4
Gas connection
3
/4 (BSP) male
R 130mm from RH side, 32mm from rear, and
655mm from floor All units supplied with Natural and LP gas
regulator
Electrical connection
23mm from RH side, 484mm from rear, and 150mm from floor
Dimensions
Width 900mm Depth 805mm Height 915mm Incl. splashback 1130mm
Pack ing data
1.02m3 Width 940mm Depth 865mm Height 1255mm
Gas types
Available in Natural gas and LP gas Please specif y when ordering Units supplied complete with gas type
conversion kits Other gas types on request
Options at extra cost
Simmer plates (replaces Potstand) Ribbed griddle plates Joining caps Castors Plinth mounting
RN8610GE, RN8613GE, RN8616GE, RN8619GE
RN8610GE RN8613GE
RN8616GE RN8619GE
Australia
www.moffat.com.au
New Zealand
www.moffat.co.nz
Australia Moffat Pty Limited
Victoria/Tasmania
740 Springvale Road Mulgrave, Victoria 3170 Telephone 03-9518 3888 Facsimile 03-9518 3833 vsales@moffat.com.au
New South Wales
Telephone 02-8833 4111 nswsales@moffat.com.au
South Australia
Telephone 03-9518 3888 vsales@moffat.com.au
Queensland
Telephone 07-3630 8600 qldsales@moffat.com.au
Western Australia
Telephone 08-9562 0263 jberent@moffat.com.au
New Zealand Moffat Limited
Christchurch
Telephone 03-389 1007 sales@moffat.co.nz
Auckland
Telephone 09-574 3150 sales@moffat.co.nz
ISO9001
Quality Management Standard
Designed and manufactured by
ISO9001 All Waldorf products are designed and manufactured by Moffat using the internationally recognised ISO9001 quality management system, covering design, manufacture and final inspection, ensuring consistent high quality at all times.
In line with policy to continually develop and improve its products, Moffat Limited reserves the right to change specifications and design without notice.
Printed in New Zealand
© Copyright Mo ffat Limited
Moffat/4639/BH/1M/8.05
Loading...