
Technical data sheet for
GAS RANGE STATIC OVEN 600mm
RN8410G, RN8413G, RN8416G
 Heavy-duty construction
 28 MJ/hr open burners
 Flame failure standard
 Pilot burners optional 
 300mm and 600mm griddle plate options
 Optional simmer plates
 GN 1/1 gas static oven
 Drop down door
 Stainless steel exterior
 Easy clean
 Easy service
 Fully modular
RN8410G
Overall Construction
• Galvanized steel chassis
• Welded hob with 1.5mm 304 stainless steel bull nose 
• Splashback and hob sides 1.2mm 304 stainless steel
• Front panels and oven sides 0.9mm 304 stainless steel
• 150mm legs in 63mm dia. heavy-duty 1.2mm 304 stainless steel  
 with adjustable feet
Cooktop
• Cast iron 28MJ/hr open burners with forged brass cap
• Vitreous enamelled cast iron potstands
• Vitreous enamelled open burner spill covers
• Cast iron simmer plates (optional extra)
• 12mm thick mild steel griddle plates
• 2.5mm 304 stainless steel griddle splash guards 
• Vitreous enamelled spill trays 
• Aluminised steel internal construction 
Griddle sections are standard on RH side. Available on LH side to 
order or by conversion. 
Oven
• Fully welded and vitreous enamelled oven liner
• GN 1/1 capacity with 4 position racking 
• Heavy-duty easy remove heavy wire chrome rack supports
• Cast iron even heat oven sole plate 
• 24MJ oven burner
• Pilot and flame failure
• Welded frame drop down door with heav y-duty spring 
 hinge system
• 0.9mm 304 stainless steel door outer
• 1.0mm press formed vitreous enamelled door inner
• High density fibreglass insulated
• Stay cool stainless steel door handle with cast metal handle mounts
• Supplied with two chrome wire oven racks
Controls
• Large easy use control knob - heat resistant reinforced
• Easy view control settings on knob 
Cooktop
• Variable high to low controls to open burners
• Open burners flame failure standard with pilot burners optional 
• Variable high to low controls to griddles
• Griddles standard with pilot, flame failure and piezo ignition
Ovens
• 100-270˚C thermostatic control 
• Flame failure 
Cleaning and Servicing 
• All models with easy clean stainless steel external finish
• Lift off burners heads and vitreous enamelled burner spill covers
• Vitreous enamelled spill trays under open burner and 
 griddle sections
• Bottom sill removable for oven burner and pilot access
• Removable oven racking and sole plate
• Easy clean vitreous enamel oven and door inner
• Door hinge spring adjustable on unit (door outer removed)
• Door disengages for lift off removal and increased service access
• All parts front accessible from installed position
• Access to all parts from front of unit

Technical data sheet for
GAS RANGE STATIC OVEN 600mm
RN8410G, RN8413G, RN8416G
Specifications
Burners
Open Burners 28M J/hr dual flame ring with 
simmer rate
Griddle Burners 20M J/hr per 300mm section 
Oven 24M J tubular under cast iron sole plate
Gas power
RN8410G 136 MJ/hr, 37.7kW 
RN8413G  100 MJ/hr, 27.8kW 
RN8416G  64 MJ/hr, 17.8kW
Griddle Plate
300mm Griddle cooking surface 
292mm x 475mm, 1387cm2
600mm Griddle cooking surface 
592mm x 475mm, 2812cm2
Oven Dimensions
Width 500mm 
Depth 590mm 
Height 385mm 
Rack size 495mm x 540mm 
Rack positions 4
Gas connection
3
/4 (BSP) male
R 
130mm from RH side, 35mm from rear,
and 655mm from floor 
All units supplied with Natural and LP gas 
regulator
Dimensions
Width 600mm 
Depth 805mm 
Height 915mm 
Incl. splashback 1130mm
Pack ing data
0.70m3 
Width 640mm 
Depth 865mm 
Height 1255mm
Gas types
Available in Natural gas and LP gas 
Please specif y when ordering 
Units supplied complete with gas type 
conversion kits 
Other gas types on request
Options at extra cost
Simmer plates (replaces Potstand) 
Ribbed griddle plates 
Joining caps 
Castors 
Plinth mounting
RN8410G, RN8413G, RN8416G
RN8410G
RN8413G
RN8416G
Australia
www.moffat.com.au
New Zealand
www.moffat.co.nz
Australia 
Moffat Pty Limited
Victoria/Tasmania
740 Springvale Road 
Mulgrave, Victoria 3170 
Telephone 03-9518 3888 
Facsimile 03-9518 3833 
vsales@moffat.com.au
New South Wales
Telephone 02-8833 4111 
nswsales@moffat.com.au
South Australia
Telephone 03-9518 3888 
vsales@moffat.com.au
Queensland
Telephone 07-3630 8600 
qldsales@moffat.com.au
Western Australia
Telephone 08-9562 0263 
jberent@moffat.com.au
New Zealand 
Moffat Limited
Christchurch
Telephone 03-389 1007 
sales@moffat.co.nz
Auckland
Telephone 09-574 3150 
sales@moffat.co.nz
ISO9001
Quality 
Management 
Standard
Designed and manufactured by
ISO9001 
All Waldorf products are designed and 
manufactured by Moffat using the 
internationally recognised ISO9001 quality 
management system, covering design, 
manufacture and final inspection, ensuring 
consistent high quality at all times.
In line with policy to continually develop and 
improve its products, Moffat Limited reserves 
the right to change specifications and design 
without notice.
Printed in New Zealand
© Copyright Mo ffat Limited
Moffat/4639/BH/1M/8.05