Page 1
Technical data sheet for
GAS COOKTOPS 600mm
RN8400G-B, RN8400G-CB, RN8400G-LS, RN8403G-B, RN8403G-CB, RN8403G-LS,
RN8406G-B, RN8406G-CB, RN8406G-LS
Heavy-duty construction
28 MJ/hr open burners
Flame failure standard
Pilot burners optional
300mm griddle plate options
Optional simmer plates
3 models of base unit
Stainless steel exterior
Easy clean
Easy service
Fully modular
RN8400G-LS
Overall Construction
Cooktop
• Welded hob with 1.5mm 304 stainless steel bull nose
• Splashback and side panels 1.2mm 304 stainless steel
• Front panels 0.9mm 304 stainless steel
• Aluminised steel internal construction
• Cast iron 28MJ/hr open burners with forged brass cap
• Vitreous enamelled cast iron potstands
• Vitreous enamelled open burner spill covers
• Cast iron simmer plates (optional extra)
• 12mm thick mild steel griddle plate
• 2.5mm 304 stainless steel griddle splash guards
• Vitreous enamelled spill trays
Griddle sections are standard on RH side. Available on LH side to
order or by conversion.
Bench mount (supplied as –B model)
• Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs
with adjustable feet
• Adjustable height 80mm – 105mm
Cabinet base (supplied as –CB model)
• Fully modular for match suite finish
• Double skin 0.9mm 304 stainless steel interior and exterior
• Optional GN 1/1 4 position racking kit
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
adjustable feet
Leg stand (supplied as –LS model)
• Fully modular for matched suite finish
• Framed top for connection to Cooktop
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
adjustable feet
• Fully modular framed stand shelf with 0.9mm 304 stainless
steel finish
• Suitable for rear or through shelf gas connection to Cooktop
• Quick assembly design (no tools required)
Controls
• Variable high to low controls to open burners
• Open burners flame failure standard with pilot burners optional
• Variable high to low controls to griddles
• Griddles standard with pilot, flame failure and piezo ignition
• Large easy use control knob - heat resistant reinforced
• Easy view control settings on knob
Cleaning and Servicing
• All models with easy clean stainless steel external finish
• Lift off burners heads and vitreous enamelled burner spill covers
• Vitreous enamelled spill trays under open burner and
griddle sections
• Access to all parts from front of unit
Page 2
Technical data sheet for
GAS COOKTOPS 600mm
Specifications
Burners
Open Burners 28M J/hr dual flame ring with
simmer rate
Griddle Burners 20M J/hr
Gas power
RN8400G 112 MJ/hr, 31kW
RN8403G 76 MJ/hr, 21kW
RN8406G 40 MJ/hr, 11kW
Griddle Plate
300mm Griddle cooking surface
292mm x 475mm, 1387cm2
600mm Griddle cooking surface
592mm x 475mm, 2812cm2
Gas connection
3
/4 (BSP) male
R
130mm from RH side, 32mm from rear,
and 655mm from floor
All units supplied w ith Natural and LP gas regulator
Dimensions
Bench models
Width 600mm
Depth 805mm
Height 315mm
Incl. splashback 530mm
All models (excluding Bench model)
Width 600mm
Depth 805mm
Height 915mm
Incl. splashback 1130mm
Pack ing data
Bench and Leg Stand models
0.37m3
Width 640mm
Depth 865mm
Height 665mm
Cabinet Base models
0.70m3
Width 640mm
Depth 865mm
Height 1255mm
Gas types
Available in Natural gas and LP gas
Please specif y when ordering
Units supplied complete with gas type
conversion kits
Other gas types on request
Options at extra cost
Simmer plates (replaces Potstand)
Ribbed griddle plates
Joining caps
Castors
Plinth mounting
RN8400G-B
Bench Model
RN8400G-CB
Cabinet Base
RN8400G-LS
Leg Stand
Plan
Australia
www.moffat.com.au
New Zealand
www.moffat.co.nz
Australia
Moffat Pty Limited
Victoria/Tasmania
740 Springvale Road
Mulgrave, Victoria 3170
Telephone 03-9518 3888
Facsimile 03-9518 3833
vsales@moffat.com.au
New South Wales
Telephone 02-8833 4111
nswsales@moffat.com.au
South Australia
Telephone 03-9518 3888
vsales@moffat.com.au
Queensland
Telephone 07-3630 8600
qldsales@moffat.com.au
Western Australia
Telephone 08-9562 0263
jberent@moffat.com.au
New Zealand
Moffat Limited
Christchurch
Telephone 03-389 1007
sales@moffat.co.nz
Auckland
Telephone 09-574 3150
sales@moffat.co.nz
ISO9001
Quality
Management
Standard
Designed and manufactured by
ISO9001
All Waldorf products are designed and
manufactured by Moffat using the
internationally recognised ISO9001 quality
management system, covering design,
manufacture and final inspection, ensuring
consistent high quality at all times.
In line with policy to continually develop and
improve its products, Moffat Limited reserves
the right to change specifications and design
without notice.
Printed in New Zealand
© Copyright Mo ffat Limited
Moffat/4639/BH/1M/8.05
Loading...