Warewashers
Technical data sheet for
PW1
High Performance
Potwasher
W 680mm x D 765mm x H 1850mm
W Series
PW1
The front loading PW1 washes pots, bins,
trays and most bowls up to 80 litres and
also has a rail for hanging whisks, ladles and
other utensils.
Standard Features
• Upper and lower stainless steel arms
with removable end caps for cleaning
• Auto start on door closure
• FastClean - rounded wash tank, double
filtration, scrap and pump inlet filters
• Flush front design
• Large internal chamber
• Robust stainless steel construction
• Electromechanical controls
• Watermark Certified
• 2.6 litres per cycle water consumption
• 1.5kW wash pump recirculates wash
water at nominal 800 litres per minute
• 5kW rinse and 2.5kW wash heating
• Triple Cycle Selection - 2, 4 and 6
minute cycles
• Powerful rinse booster elements ensure
fast recovery between cycles
• 750mm high wash chamber clearance
• Counterbalanced insulated two piece door
with safety stop switch
• Stainless steel support grid for bowls etc.
• Suits 500mm international racks
• Hanging rail for whisks, ladles etc
Accessories
• 1 x 500mm Dish Rack
• 1 x 500mm Cup Rack
• 1 x 8 Division Cutlery Container
• 1 x 435mm Cup Cover
Optional Accessories
• Customised loading racks for other items
The unit shall be a Washtech front loading warewasher with Watermark Certification. The unit shall have automatic fill, low level wash pump and element protection and
operator selectable 2, 4 and 6 minute complete operating cycles. The usable internal wash chamber shall be 750mm high by 595mm deep by 565mm wide. The unit
shall be fitted with rotating upper and lower all stainless steel wash and rinse arms all with removable end plugs for cleaning. The unit shall be fitted with a 1.5kW wash
pump and hot water consumption shall be 2.6 litres per operating cycle. The unit shall require 15amp 3 phase 5 wire electrical supply. The unit shall be supplied with
500mm cup and dishracks and shipped in 100% recyclable packaging. Height of machine shown includes height with maximum 60mm adjustable leg option in use.
Warewashers
W Series
PW1
Australia
www.moat.com.au
New Zealand
www.moat.co.nz
Australia
Moat Pty Limited
Victoria/Tasmania
740 Springvale Road
Mulgrave, Victoria 3170
Telephone 03-9518 3888
Facsimile 03-9518 3833
vsales@moat.com.au
www.moat.com.au
New South Wales
Telephone 02-8833 4111
nswsales@moat.com.au
South Australia
Telephone 03-9518 3888
vsales@moat.com.au
Queensland
Telephone 07-3630 8600
qldsales@moat.com.au
Western Australia
Telephone 08-9202 6820
bgarcia@moat.com.au
New Zealand
Moat Limited
Christchurch
16 Osborne Street
Christchurch 8011
Telephone +64 3-389 1007
Facsimile +64 3-389 1276
Auckland
Telephone +64 9-574 3150
export@moat.co.nz
www.moat.co.nz
A
B
C
Hot Water
Waste
Electrical
Dimensions
Width
Depth
Height
Weight
temperature
connection
pressure
flow
quality
connection
line
3 phase N+E 415V 50Hz
Refer operator manual for complete installation instructions.
680mm
765mm
1850mm
125kg
65C
3/4”
200-350 kPa
20l/min
potable & soft
1.5 BSP
2” BSP
9kW, 15A/phase
Packed Dimensions
Width
Depth
Height
Weight
Cubicmetres
850mm
850mm
1790mm
165kg
1.29m
© Copyright Moffat Ltd
Moffat /1213 /5.11