Moffat P8M-2 User Manual

TECHNICAL DATA SHEET FOR

P8M DOUBLE STACKED

Full Size Manual / Electric Proofer/Holding Cabinet Double Stacked on a Stainless Steel Base Stand

P8M/2 - Double stack

DOUBLE STACK FEATURES

• Two 8 full size sheet pan capacity

• Two 16 half size sheet pan capacity

• Compact 28

• Full stainless steel spacer frame

PROOFER/HOLDING CABINET FEATURES (each)

• Dual function Proofer and Holding Cabinet

• 8 full size sheet pan capacity

• 16 half size sheet pan capacity

• 3”/ 76mm tray spacing

• 110-120V plug-in

• 15A NEMA 5-15P cordset ﬁtted

• Full double skin construction

• Auto water ﬁll system with optional integrated water ﬁlter kit

• Continuous door seal

• Side hinged door (standard LH hinge). Optional RH hinge (ﬁeld convertible)

• Off / Proof / Hold mode selection

• Low velocity circulation fan system

• Mechanical thermostat

• Humidity level control

• Dual halogen cabinet interior lamps

• Cabinet temperature display thermometer

ACCESSORIES

• Optional 3M Cuno water ﬁlter kit complete with cartridge and connection ﬁttings

• Installs in pre-ﬁtted rear housing of cabinet for ﬂush rear installation

/8” / 735mm width

P 8 M / 2

P8M/2

P8M units shall be Moffat electrically heated Turbofan Proofer and Holding Cabinets ETL Listed and NSF-4 listed. The proofer and holding cabinets shall have double skin construction with stainless steel interior and exterior sides, front and top. Doors shall be side hinged and ﬁeld reversible. Units shall have capacity for up to 16 half size sheet pans or 8 full size sheet pans. A single speed fan shall gently and evenly circulate air around the cabinet. Cabinets shall be controlled by a mechanical thermostat and humidity via a control of the water tank, thermometers shall indicate the cabinet temperature. Proofer and Holding Cabinets shall be ﬁtted with NEMA 5-15P cordsets. The proofer and holding cabinets shall be double stacked using Double Stacking Kit DSKP8. Units shall be supplied in 100% recyclable shipping packaging.

Double stack models are supplied as two individual proofer and holding cabinets and a double stacking kit for ﬁeld assembly.

735 mm / 28

810 mm / 31

P 8 M / 2

P8M/2 Full Size Manual / Electric

Proofer/Holding Cabinet

CONSTRUCTION- PROOFERS 304 stainless steel interior cabinet Stainless steel front, sides and top exterior Stainless steel interior side racks Stainless steel frame side hinged door

0.2” / 5mm thick door glass Stainless steel control panel Aluminized coated steel base and rear panels

CONSTRUCTION - DOUBLE STACKING KIT

All stainless steel construction Stainless steel spacer frame

CONTROLS (each proofer) Off / Proof / Holding mode selector switch. Mechanical thermostat 65-185°F / 20-85°C Air heating ON control panel indicator Humidity level control Humidity tank ON control panel indicator Cabinet temperature thermometer Auto-ﬁll water system standard

CLEANING Stainless steel top and side exterior panels Stainless steel interior chamber Easy access to all interior surfaces Fully removable stainless steel rack support Removable humidity water tank (no tools)

SPECIFICATIONS Electrical Requirements (each proofer)

110-120V, 50/60Hz, 1-phase, 1.45kW, 11.6A NEMA 5-15P cordset ﬁtted

Water Requirements (optional)

Cold water connection ¾” GHT male 80psi maximum inlet pressure / 20psi minimum inlet pressure

External Dimensions

Width 28 Height 70½” / 1792mm Depth 31

/8” / 735mm

/8” / 810mm

Proofer Internal Dimensions (each proofer)

Width 18¼”/ 465mm Height 28¾” / 730mm Depth 27½” / 700mm Volume 8.5ft³ / 0.24m3

Nett Weight (double stack complete)

361lbs / 164kg

Packing Data (P8M proofers each)

201lbs / 95.3kg

26.8 ft³ / 0.76m3 Width 30” / 760mm Height 42½” / 1080mm Depth 36

/8” / 925mm

Packing Data (Stacking Kit)

15lbs / 7kg

4.1ft³ / 0.12m3 Width 30 Height 35” / 890mm Depth 6

/8” / 770mm

/4” / 170mm

Double Stacking Kits

For after market double stacking two P8M proofer/holding cabinets DSKP8 - Double stacking kit

www.moffat.com

U.S.A.

Moffat Inc

3765 Champion Boulevard

Winston-Salem

North Carolina 27105

Ph Toll Free 1-800-551 8795

Ph 336-661 0257

Fax 336-661 9546

Email sales@moffat.com

www.moffat.com

Manufactured by:

Moffat Limited

16 Osborne Street PO Box 10-001

Christchurch 8081 New Zealand

ISO9001

WATER

CONNECTION

25 mm / 1"

104 mm / 4

Quality Management

ELECTRICAL

ENTRY

Designed and manufactured by

9 3

/ m

m 99

66 / m m 8

9 6 1

45 /

m m

1 1

3 / m

m 0 2 8

WATER

CONNECTION

82 mm / 3

ELECTRICAL

ENTRY

136 mm / 5

1 1

/ m m 83

4 /

m m 0

2 / 2

mm 5

ISO9001 All Turbofan products are designed and manufactured by Moffat using the internationally recognised ISO9001 quality management system, covering design, manufacture and ﬁnal inspection, ensuring consistent high quality at all times.

In line with policy to continually develop and improve its products, Moffat Limited reserves the right to change speciﬁcations and design without notice.

Standard