The reproduction or copying of any part of this manual by any means whatsoever is strictly forbidden unless authorized previously in writing
by the manufacturer.
In line with policy to continually d evelop and improve its products, Moffat Ltd. reserves the right to change the specifications and design
without prior notice.
Before using your new Proofer / Holding Cabinet, please
read this instruction manual carefully, pay particular
attention to any information labelled ‘WARNING’,
‘CAUTION’, ‘IMPORTANT’ or ‘NOTE’ in this manual.
Warning
Indicates a hazardous situation
which, if not avoided, will result in
death or serious injury.
Caution
Indicates a hazardous situation
which, if not avoided, will result in
minor or moderate injury.
If you are unsure of any aspect of the installation,
instructions or performance of your Proofer / Holding
Cabinet, contact your TURBOFAN dealer promptly. In
many cases a phone call could answer your question.
Should you contact your TURBOFAN dealer on any matter
concerning this proofer / holding cabinet, please have the
information provided opposite, readily available.
This manual must be kept by the owner for future
reference.
A record of the
and
Serial Number of the Proofer / Holding Cabinet
Date of Purchase, Date of Installation
should be recorded in the area provided below.
The serial number of this Proofer / Holding Cabinet
can be found on the Technical Data Plate located on
the front right hand side panel, see diagram in
‘Installation Section’
Model Number:
Serial Number:
Dealer:
Service Provider:
Date Purchased:
.
Safety Information
For your safety, please pay attention to the following symbols
marked on the appliance.
- Risk of electric shock.
No user serviceable parts inside.
Qualified service person access only.
Disconnect from power before servicing.
Date Installed:
2
P8M Proofer / Holding Cabinet
Specifications
P8M Specifications Table:-
Power Ratings
Tray Capacity
Tray Spacing
110-120V, 1P+N+E, 60HZ, 1.45 kW
220-240V, 1P+N+E, 50/60HZ, 1.50 kW
8, 18” x 26” / 460 x 660, Full Size Sheet Pan Capacity.
16, 18” x 13” / 460 x 330, Half Size Sheet Pan Capacity.
8, 600 x 400mm Tray Capacity (Optional Kit).