Moffat MSF 620 User Manual
Instruction
Booklet
Electric
Oven
MSF 620
Thank you for selecting our appliance
We wish you lots of enjoyment with your new appliance and we hope that you will consider our
brand again when purchasing household appliances.
Please read this user manual carefully and keep it throughout the product life cycle as a
reference document. The user manual should be passed on to any future owner of the
appliance.
2
Important Safety Information
You MUST read these warnings carefully before installing or using the oven. If you need
assistance, contact our Customer Care Department on 08705 950950
Installation
• This oven must be installed by qualified
personnel to the relevant British Standards.
• This oven is heavy. Take care when moving it.
• Remove all packaging, both inside and outside
the oven, before using the oven.
• Once you have removed all packaging from
the appliance, ensure that it is not damaged
and the electric cable is in perfect condition.
Otherwise, contact your dealer before
proceeding with the installation.
• Do not attempt to modify the oven in any way.
People Safety
• This oven is designed to be operated by
adults. Do not allow children to play near or with
the oven.
• Do not allow children to sit or climb on the drop
down door.
• This oven is not intended for use by children
or other persons whose physical, sensory or
mental capabilities or lack of experience and
knowledge prevents them from using the
appliance safely without supervision or
instruction by a responsible person to ensure
that they can use the appliance safely.
• The oven gets hot when it is in use. Children
should be kept away until it has cooled.
During Use
• This oven is intended for domestic cooking
only. It is not designed for commercial or industrial
purposes.
• The oven gets hot when it is in use and retains
heat for a long period after use. Care should be
taken to avoid touching heating elements inside
the oven.
• Always stand back from the oven when
opening the oven door during or immediately
after use to allow any build up of steam to
release.
• Never line any part of the oven with aluminium
foil.
• Do not allow heatproof cooking material,
e.g. roasting bags, to come into contact with
oven elements.
• Never place plastic or any other material which
may melt in or on the oven.
• Do not place sealed cans or aerosols inside
the oven. They may explode if they are heated.
• Do not hang towels, dishcloths or clothes
from the oven or its handle.
• Do not use this oven if it is in contact with
water and never operate it with wet hands.
• Take great care when heating fats and oils as
they will ignite if they become too hot.
• Always use oven gloves to remove and
replace food in the oven.
• Ensure that all control knobs are in the OFF
position when not in use.
• Do not leave cookware containing foodstuffs,
e.g. fat or oil in or on the oven in case it is
inadvertently switched ON.
• When using other electrical appliances, ensure
the cable does not come into contact with the
hot surfaces of the oven.
Maintenance and Cleaning
• Only clean this oven in accordance with the
instructions.
• The oven should be kept clean at all times. A
build-up of fats or other foodstuffs could result in
a fire, especially in the grill pan.
• Always allow the oven to cool down and
switch off the electrical supply before carrying
out any cleaning or maintenance work.
• Never use steam or steam machines to clean
the appliance.
• Do not use harsh abrasive cleaners or
sharp metal scraper to clean the oven door
glass since they can scratch the surface,
which may result in shattering of the glass.
3
Contents
For the User
Important Safety Information 3
Description of the Oven 5
Before the First Use 5
Controls 6
Electronic Programmer 8
Using the Oven 12
Hints and tips for using the Oven 13
Cooking tables 1 5
Cleaning the Oven 17
Something not Working 20
Service and Spare Parts 24
Guarantee Conditions 25
European Guarantee 26
Guide to Use the instructions
The following symbols will be found in the
text to guide you throughout the Instructions:
Safety Instructions
Step by step instructions for an
operation
)
Hints and Tips
Environmental information
Keep this instruction book for future
reference and ensure it is passed on
to any new owner.
For the Installer
Technical Data 21
Electrical Connection 22
Building In 23
Service
• This oven should only be repaired or serviced
by an authorised Service Engineer and only
genuine approved spare parts should be used.
Environmental Information
• After installation, please dispose of the
packaging with due regard to safety and the
environment.
• When disposing of an old appliance, make
it unusable, by cutting off the cable. Remove
any door catches, to prevent small children
being trapped inside.
The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it shall
be handed over to the applicable collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local city office, your
household waste disposal service or the shop
where you purchased the product.
4
Description of the Oven
10
11
53
24
1
7
1. Control Panel
2. Oven Function Control Knob
3. Electronic Programmer
4. Thermostat Control Knob
5. Thermostat Control Light
6. Air Vents for Cooling Fan
7. Grill
8. Oven Light
6
9. Oven Fan
10. Rating Plate
11. Oven Door
8
9
Before the First Use
Remove all packaging, both inside
and outside the oven, before using
the appliance.
Before first use, the oven should be heated
without food. During this time, an unpleasant
odour may be emitted. This is quite normal.
The oven will work only if the time of day
has been set.
1. Set the time of day with the electronic
programmer (see chapter "Electronic
Programmer").
2. Switch the oven function control knob to fan
cooking function
.
3. Set the thermostat control knob to 250.
4. Open a window for ventilation.
5. Allow the oven to run empty for approximately
45 minutes.
This procedure should be repeated with the
conventional cooking and grill cooking
functions for approximately 5-10 minutes.
Before cooking for the first time,
carefully wash the oven
accessories.
5
Controls
Oven Function Control Knob
0 The oven is off.
Oven light - The oven light will be on
without any cooking function.
Conventional cooking - The heat
comes from both the top and bottom
element, ensuring even heating inside
the oven.
Top heating element - The heat comes
from the top element only (outer
section).
Bottom heating element - The heat
comes from the bottom of the oven only.
Inner Grill - The inner grill element can
be used for grilling small quantities.
Full Grill - The full grill element will be
on. Recommended for large quantities.
Thermal Grilling - This function offers
an alternative method of cooking food
items, normally associated with
conventional grilling. The grill element
and the oven fan operate alternatively,
circulating hot air around the food.
When using the thermal grill
cooking function, select a
maximum temperature of 200°C.
Fan cooking - This allows you to roast
or roast and bake simultaneously
using any shelf, without flavour
transference.
Defrost Setting - This setting is
intended to assist in thawing of frozen
food.
Ensure the thermostat control knob is
in the OFF position.
6
Thermostat Control Knob
Turn the thermostat control knob clockwise to
select temperatures between 50°C and 250°C.
Thermostat Control Light
The thermostat control light will come on
when the thermostat control knob is turned.
The light will remain on until the correct temperature is reached. It will then cycle on and
off to show the temperature is being
maintained.
The Safety Thermostat
This oven is provided with a safety thermostat.
In case of malfunctioning of the main
thermostat, and consequent over-heating, the
safety device will stop the power supply to the
appliance. If this happens, call your local
Service Force Centre. Under no
circumstances should you attempt to repair
the appliance yourself.
The Cooling Fan
The cooling fan is designed to cool the walls
of the oven and the components of the oven
itself. The fan switches on automatically after
a few minutes of cooking. Warm air is blown
out through the aperture near the oven door
handle. When the oven is switched off, the
fan will remain on in order to cool the oven
and kitchen cabinets properly, after which it
switches off automatically.
7
Electronic Programmer
4
5
6
123
The oven will work only if the time of
day has been set. Moreover, the oven
can also be operated without any
programme.
Setting the time of day
When the power supply is switched on, or after
a power failure, the “Time of day” pilot lamp will
flash on the display.
To set the correct time of day:
1. press button “ ” or “ ”.
2. After the setting is carried out, wait for 5
seconds: the “Time of day” pilot lamp will
go out and the display will show the set
time. The appliance is ready for use.
To reset the correct time of day:
1. press button repeatedly to select the
“Time of day” function. The relevant pilot
lamp will start flashing. Then proceed as
described above.
The time of day can only be reset if no
automatic function (cook time or end of
cooking time) has been set.
1. Control button for selecting a function
2. Decreasing control button “ ”
3. Increasing control button “ ”
7
4. Display
8
5. “Cook Time” pilot lamp
6. “End time” pilot lamp
7. “Countdown” pilot lamp
8. “Time of day” pilot lamp
In the event of a power failure, all the
settings (time of day, programme
setting or programme in operation)
will be cancelled.
When the power is restored, the
numbers in the display will flash, and
the clock/timer has to be reset.
“Cook Time” function
This function allows the oven to automatically
switch off at the end of a programmed cooking
duration time. Place food in the oven, select
a cooking function and adjust the cooking
temperature.
8
Press button repeatedly to select the “Cook
Time” function. The relevant pilot lamp will
start flashing. Then, proceed as follows:
To set the duration time:
1. press button “
2. After the setting is carried out, wait for 5
seconds: the "Cook Time" pilot lamp will
come on and the display will revert to the
time of day.
3. When cooking time is over, the oven will
be switched off automatically and an
acoustic alarm will be heard, while the
pilot lamp will start flashing. Turn the oven
function and the thermostat control knob
to zero.
To switch off the acoustic alarm, press
any button. NOTE: when doing this
operation, the oven will be operated again,
therefore, remember to turn the oven
function and the thermostat control knob
to zero at the end of the cooking time.
To cancel the duration time:
1. Press button repeatedly to select the
“Cooking Duration” function. The relevant
pilot lamp will flash and the display will
show the remaining cooking time.
2. Press button “
“0:00”. After 5 seconds the pilot lamp will
go out and the display will revert to the
time of day.
” or “ ”.
” until the display shows
“End Time” function
Thanks to this function, you can set the oven
to switch off automatically when a programmed
end of cooking time is over. Place food in the
oven, select a cooking function and adjust the
cooking temperature. Press button
repeatedly to select the “End Time” function.
The relevant pilot lamp will start flashing.
Then, proceed as follows:
To set the End Time:
1. press button “ ” or “ ”.
2. After the setting is carried out, wait for 5
seconds: the “End Time” pilot lamp will
come on and the display will revert to the
time of day.
9
Loading...