The following symbols are used in this user manual:
WARNING!
Important information concerning your
personal safety and information on
how to avoid damaging the appliance.
IMPORTANT!
General information and tips
Environmental information
Contents
Important safety instructions 3
Product description
Controls and their functions
Before first use
Grill and oven furniture
The electronic timer
The dual grill
Grilling chart
The top oven
The main oven
Oven cooking chart
2
5
6
7
8
9
14
16
17
19
21
Roasting chart
Defrost
Care and cleaning
Troubleshooting
Technical details
Environment
Installation instructions
Service and spare parts
Guarantee conditions
European guarantee
23
24
25
29
30
30
31
37
38
39
Page 3
Important safety instructions
These warnings are provided in the interests of
your safety. Ensure that you understand them
all before installing or using the appliance.
Your safety is of paramount importance. If you
are unsure about any of the meanings of these
warnings please contact customer care.
Installation
•
The appliance must be installed according to
the instructions supplied. The installation
work must be undertaken by a qualified
electrician or competent person.
•
The appliance should be serviced by an
authorised Service Engineer and only
genuine approved spare parts should be
used.
•
The appliance must be installed in an
adequately ventilated room.
•
It is imperative that the appliance is left in the
base to protect both the appliance and the
floor.
•
This appliance is heavy and care must be
taken when moving it.
•
Do not attempt to lift or move this appliance
by the handles.
•
All packaging, both inside and outside the
appliance must be removed before the
appliance is used.
•
It is dangerous to alter the specifications or
modify the appliance in any way.
Child safety
•
Do not allow children to play with any part of
the packaging.
•
Do not allow children to sit or climb on the
drop down doors.
•
This appliance is not intended for use by
children and other persons whose physical,
sensory or mental capabilities or lack of
experience and knowledge prevents them
from using the appliance safely without
supervision or instruction by a responsible
person to ensure that they can use the
appliance safely.
•
Children should be supervised to ensure that
they do not play with the appliance.
Accessible parts may be hot when the grill is
in use. Young children should be kept away.
During use
•
This appliance is not intended to be operated
by means of an external timer or separate
remote control system.
•
This appliance has been designed for
domestic use to cook edible foodstuffs only
and must not be used for any other
purposes.
•
Take great care when heating fats and oils,
as they will ignite if they become too hot.
•
Never place plastic or any other material
which may melt in or on the oven.
•
Always support the grill pan when it is in the
withdrawn or partially withdrawn position.
•
Always use oven gloves to remove and
place food in the oven.
CAUTION!
3
Page 4
•
During use the appliance becomes hot. Care
should be taken to avoid touching heating
elements inside the oven.
•
Ensure that all vents are not obstructed to
ensure ventilation of the oven cavity.
•
Never line any part of the appliance with foil.
•
Always stand back from the appliance when
opening the doors to allow any build up of
steam or heat to release.
•
Stand clear when opening the drop down
oven door. Do not allow it to fall open support it using the door handle, until it is
fully open.
WARNING!
Never leave the appliance unattended when
the oven door is open.
•
Do not place sealed cans or aerosols inside
the oven. They may explode if they are
heated.
•
Ensure that all control knobs are in the off
position when not in use.
•
Do not stand on the appliance or on the
open oven doors.
•
Do not hang towels, dishcloths or clothes
from the appliance or its handles.
•
Do not use this appliance if it is in contact
with water.
•
Never operate it with wet hands.
Cleaning and maintenance
WARNING!
For hygiene and safety reasons this
appliance should be kept clean at all times.
A build-up of fat or other foodstuff could
result in a fire especially in the grill pan.
•
Do not leave the cookware containing
foodstuffs, e.g. fat or oil in the appliance in
case it is inadvertently switched on.
•
Always allow the appliance to cool before
switching off at the wall prior to carrying out
any cleaning / maintenance work.
•
Only clean this appliance in accordance with
the instructions given in this book.
•
Never use steam or high-pressure steam
cleaners to clean the appliance.
4
Page 5
Product description
Electronic timer
Control panel
Dual grill / Top oven
Main oven
5
Page 6
Controls and their functions
Used to set the time of day, cooktime and to set automatic cooking.
At the end of the timed period an audible signal will sound
for up to 2 minutes.
Increase control - used to increase the time on the display.
Electronic timer
Main oven control
Dual grill /
Top oven control
Indicator neons
Decrease control - used to decrease the time on the display.
Selector control - used to set the required function.
Cook time indicator.
End time indicator.
Countdown indicator.
Time indicator.
Turn to activate the main oven and set the main oven
temperature.
Defrost function - used for defrosting food.
Turn to set the temperature of the Dual grill / Top oven.
Select to turn off the Dual grill / Top oven.
Select to activate the centre grill only.
Select to activate the full grill.
Select to activate the top oven.
The indicator neons will turn off and on during use to
show that the temperature of the dual grill, top oven or
main oven is being maintained.
6
Page 7
Before using the appliance
Rating plate
•
This is usually situated on the front frame of the
appliance and can be seen upon opening
either the main or top oven door. Alternatively
the rating plate may also be found on the back
or top of some models (where applicable).
•
The appliance must be protected by a suitably
rated fuse or circuit breaker.
•
The rating of the appliance is given on the
rating plate.
•
Do not remove the rating plate from the
appliance as this may invalidate the
guarantee.
Preparing to use your appliance
•
Wipe over the base of the oven(s) with a soft
cloth using hot soapy water. Wash the furniture
before use.
•
We suggest that you run the oven(s) and grill
for 10 – 15 minutes at maximum temperature,
to burn off any residue from their surfaces.
Accessible parts may become hotter than in
normal use. Children should be kept away.
During this period an odour may be emitted, it
is therefore advisable to open a window for
ventilation.
The cooling fan for the controls
•
The cooling fan comes on immediately when
the grill is switched on and after a short time
when the oven is in use. It runs on after the
controls are switched off until the appliance has
cooled. During the initial period the cooling fan
may turn on and off, this is quite normal.
WARNING!
Always allow the cooling fan to cool the
appliance down before switching off at the
wall prior to carrying out any cleaning or
maintenance work.
Control panel indicator neon(s)
•
The indicator neon will operate when the grill
(where applicable) or oven(s) is switched on.
•
The indicator neon will glow. It may turn on and
off during use to show that the setting is being
maintained. If the neon does not operate as the
instructions indicate the controls have been
incorrectly set. Return all controls to zero and
reset following the instructions for the required
setting.
Condensation and steam
•
When food is heated it produces steam similar
to a boiling kettle. The vents allow some of this
steam to escape. However, always stand back
from the appliance when opening the door(s) to
allow any build up of steam or heat to release.
•
If the steam comes into contact with a cool
surface on the outside of the appliance, e.g. a
trim, it will condense and produce water
droplets. This is quite normal and is not
caused by a fault on the appliance.
•
To prevent discolouration, regularly wipe away
condensation and foodstuff from surfaces.
•
For your safety wall coverings at the rear of the
appliance should be securely fixed to the wall.
Cookware
•
Baking trays, dishes etc., should not be placed
directly against the grid covering the fan at the
back of the oven.
•
Do not use baking trays larger than 30cm x
35cm (12” x 14”) as they will restrict the
circulation of heat and may affect performance.
7
Page 8
Grill and oven furniture
•
The following items of grill and oven furniture
have been supplied with the appliance. If
you require replacements of any of the items
listed below please contact your local service
force centre.
1 grill pan
1 grill pan handle
Note: If you require an additional handle for
your grill pan, this can be ordered from your
local service force centre
1 grill pan grid
1 cranked shelf
(For grilling and top oven cooking)
2 straight shelves
(For main oven cooking)
8
Page 9
Hold
The electronic timer
Please note that this is a 24-hour clock, for
example 2.00pm is shown as 14.00.
In the following pages we explain how to set the
controls. Read through them a few times until you
are familiar with the procedure.
Set the time of day
When the electricity is
first switched on, the
display will flash 12.00
and the time indicator
neon will flash.
IMPORTANT!
The increase and decrease control buttons
operate slowly at first and then more rapidly. They
should be pressed separately.
To set the countdown
The 'Countdown' gives an audible reminder at the
end of any period of cooking.
Press the increase
buttons until the
correct time is
showing.
If the appliance is switched off on the wall, or there
is a loss of power, the clock will stop and you will
not be able to use the main oven.
5 sec
If necessary press the
decrease control to
help set the correct
time.
This cooking period may be up to 2 hrs 30 mins. It
is not part of the automatic control.
The time indicator
neon will flash for 5
seconds then go out.
The display will revert
to the time of day.
Hold
Press the selector control button until the
countdown indicator neon is illuminated and the
display reads 0.00
Press and hold the increase button. The display
will count up until the interval to be timed is
reached e.g. 30 minutes.
9
Page 10
If necessary press
and hold the decrease
button to achieve the
correct time interval.
IMPORTANT!
This must be done
within 5 seconds of
first pressing the
selector control button
IMPORTANT!
During the operation
of the countdown the
remaining time will be
shown in the display
To cancel the countdown
Hold
Press and hold the
selector control button
until the countdown
indicator neon flashes.
Press and hold the
decrease button. The
display will count
down until 0.00 is
reached.
Hold
Setting the oven timer control
Only the main oven can be automatically timed.
When using the timer control for the very first
time, it is advisable to let it operate while you
are at home.
At the end of the
timed period a sound
will be heard
intermittently for up to
2 minutes.
The countdown
indicator neon will
continue to flash for a
few seconds and then
go out. The display
will revert to the time
of day.
The display can be checked to show that it is
operating correctly and you will feel confident to
leave a meal to cook automatically in the future.
The sound can be
stopped by pressing
any button.
10
Page 11
Hold
To set the timer to switch on and off automatically
Ensure the electricity supply is switched on and
that the correct time of day is displayed.
Place food in oven.
To set the length of
cooking time. Press
the Selector Control
button until the cook
time indicator neon is
illuminated.
IMPORTANT!
Remember, this must be completed within 5
seconds of first pressing the Selector Control
button.
To set the 'End Time'.
Press the Selector
Control button until
the 'End Time'
indicator neon flashes.
Press the increase
control until the
required length of
cooking time is
displayed.
Press the increase
control button until the
required stop time is
displayed.
If necessary press the
decrease control until
the correct time
interval is achieved.
The maximum
cooking time is 10
hours.
If necessary press the
decrease control until
the required time
interval is achieved.
Release the buttons.
The cook time
indicator neon will be
illuminated.
Release the buttons.
The time of day will be
displayed after 5
seconds. The cook
time and end time
indicator neons will be
illuminated.
11
Page 12
Hold
IMPORTANT!
off
Set the main oven control to the required
temperature. The oven indicator neon should
be off.
To set the timer to switch off only
Ensure the electricity supply is switched on and
that the correct time of day is displayed.
To set the length of
cooking time. Press
the Selector Control
button until the cook
time indicator neon is
illuminated.
Press the increase
control until the
required length of
cooking time is
displayed.
When the automatic timed period starts, the
oven indicator neon will turn on and off
periodically during cooking, showing that the
temperature is being maintained.
Place food in oven.
If necessary press the
decrease control until
the correct time
interval is achieved.
IMPORTANT!
on
Set the main oven control to the required
temperature. The oven indicator neon should be
on.
12
To check the 'End Time' during the cooking
period, simply press the Selector Control button
once and the remaining time will be displayed.
Release the buttons.
The cook time
indicator neon will be
illuminated. After 5
seconds the display
will revert to the time
of day.
Page 13
To cancel an automatic programme
Hold
Press and hold the
selector control button
until the cook time
indicator neon flashes.
Press and hold the
decrease button. The
display will count
down until 0.00 is
reached.
To return the appliance to manual
At the end of a timed cooking period, the 'End
Time' indicator neon will flash and an alarm will
sound for up to 2 minutes.
The cook time
indicator neon will
continue to flash for a
few seconds. The
display will revert to
.
the time of day
Turn off the oven
controls.
To stop the sound,
press any of the three
The display will return
to the time of day.
buttons.
Things to note
In the event of an interruption of the electricity
supply, the timer will reset it self to zero and all
programming will be cancelled.
Automatic cooking
It is advisable to leave food in the oven for as short a
time as possible before automatic cooking. Always
ensure commercially prepared food is well within its
use by date and that home prepared food is fresh and
of good quality.
Turn off the oven
controls.
Your timer has an energy save mode which allows
you to switch the display off. For setting details
please refer to the environmental chapter of this
manual.
When cooking is complete, do not leave food to stand
in the oven, but remove and cool it quickly if the food
is not to be consumed immediately. Always ensure
food in the oven has been covered before cooking if it
is not possible to remove food immediately after
cooking.
13
Page 14
The dual grill
CAUTION!
Accessible parts may be hot when the grill is
in use. Young children should be kept away.
Using the dual grill
IMPORTANT!
The grill is a dual circuit grill, which means that
the full area of the grill can be used, or for
economy purposes, the centre section only can
be used when cooking smaller quantities of
food.
To set the full grill
area, turn the top
oven/grill selector to
full grill.
WARNING!
The grill door must be left open when
grilling.
To set the center grill
area, turn the top
oven/grill selector to
center grill.
Things to note
•
The oven light will illuminate.
To turn off the grill
Turn the top oven/grill
temperature control
knob to the off
position.
Turn the top oven/grill
temperature control
knob to the right as far
as it will go. This is the
hottest setting.
•
The cooling fan for the controls may operate
after a time.
•
The dual grill operates independently of the
oven.
•
For optimal grilling results place the grill pan
on the shelf so that the pan is positioned
centrally beneath the grill.
Turn the top oven/grill
selector control knob
to the off position.
To use the grill at
lower settings, turn
the temperature
control knob to a
lower setting.
14
Page 15
The grill pan and handle
The grill pan has a removable handle. Attach and remove as described below
To attach. Place the
wirework under the
cut out in the pan so
that the metal plate
hooks over the top of
the grill pan.
WARNING!
Ensure the handle is correctly located. It is
not necessary to remove the grill pan handle
during grilling.
Slide the handle to the
left and over the
central bump on the
grill pan.
IMPORTANT!
To remove the handle simply reverse the
process.
Hints and tips
•
Most foods should be placed on the grid in
the grill pan to allow maximum circulation of
air to lift the food out of the fats and juices.
•
Adjust the grid and grill pan runner position
to allow for different thicknesses of food.
•
Food should be thoroughly dried before
grilling to minimise splashing. Brush lean
meats and fish lightly with a little oil or
melted butter to keep them moist during
cooking.
•
Accompaniments such as tomatoes and
mushrooms may be placed underneath the
grid when grilling meats.
•
When toasting bread use the cranked shelf
in position 2 with the grid in the high position.
•
When using the centre section grill, ensure
food is placed centrally on the grilling grid
directly beneath the grill element.
•
Preheat the grill on full setting for a few
minutes to seal meat or for toasting. Adjust
the heat setting and the shelf position as
necessary during cooking.
•
The food should be turned over during
cooking as required
The times quoted above are given as a guide
and should be adjusted to suit personal taste.
16
Page 17
The top oven
The top oven is the smaller of the two ovens. It
is designed for cooking smaller quantities of
food. Place single dishes on the centre of the
shelf.
The top oven is also ideal for use as warming
compartment to warm dishes and keep food hot.
Use the top oven when you want to warm
plates. Use the lowest setting on the second
oven temperature control.
Using the top oven
Preheating
For recipes needing high temperatures, e.g.
bread, pastries, scones, soufflés etc., best
results are achieved if the oven is preheated
first. For best results when cooking frozen or
cooked chilled ready meals always preheat the
oven first.
Turn the top oven/grill
selector to top oven.
Turn the top oven/grill
temperature control
knob to the required
temperature.
Things to note
•
The oven light will illuminate.
•
The indicator neon will glow. It may turn on
and off during use to show that the setting is
being maintained.
•
The cooling fan for the controls may operate
after a time.
Do not place dishes, tins and trays directly
•
on the oven base as it becomes very hot and
damage will occur.
17
Page 18
To turn off the top oven
Turn the top oven/grill
temperature control
knob to the off
position.
Turn the top oven/grill
selector control knob
to the off position.
To fit the top oven shelf
The shelf should be fitted with the straight rods
uppermost on the frame and the forms towards
the back of the oven.
To remove a shelf slide the shelf towards you
until the shelf stop is reached. Tilt shelf up at
the front so that the stops clear the side
supports. Lift shelf clear.
To install a shelf, reverse the above steps.
Each shelf position has an upper and lower
support wire, ensure the shelf is placed between
these two support wires.
•
•
•
•
•
Hints and tips
•
Arrange the shelf in the required position
before switching the oven on. Shelf
positions are counted from the bottom
upwards.
•
There should always be at least 2.5cm (1”)
between the top of the food and the
element. This gives best cooking results
and allows room for rise in yeast mixtures,
Yorkshire puddings etc. When cooking
cakes, pastry, scones bread etc., place the
tins or baking trays centrally on the shelf.
•
Do not place cookware and cooking pots
with rough bases e.g. cast iron on the oven
door as damage to the glass may occur.
Ensure that food is placed centrally on the
shelf and there is sufficient room around
the baking tray/dish to allow for maximum
circulation.
Stand dishes on a suitably sized baking
tray on the shelf to prevent spillage onto
the oven base and to help reduce cleaning.
The material and finish of the baking tray
and dishes used will affect the degree of
base browning. Enamelware, dark, heavy
or non-stick utensils increase base
browning. Shiny aluminium or polished
steel trays reflect the heat away and give
less base browning.
Do not place baking trays directly on the
oven base as it interferes with the oven air
circulation and can lead to base burning;
use the lower shelf position.
Because of the smaller cooking space and
lower temperatures, shorter cooking times
are sometimes required.
For economy leave the door open for the
shortest possible time, particularly when
placing food into a pre-heated oven.
WARNING!
18
Page 19
The main oven
The fan oven is particularly suitable for cooking
larger quantities of food. The advantages of fan
oven cooking are:
Preheating
The fan oven quickly reaches its temperature,
so it is not usually necessary to preheat the
oven. Without preheating however, you may
find you need to add an extra 5 – 10 minutes on
the recommended cooking times. For recipes
needing high temperatures, e.g. bread, pastries,
scones, soufflés etc., best results are achieved
if the oven is preheated first. For best results
when cooking frozen or cooked chilled ready
meals always preheat the oven first.
Cooking temperatures
Fan oven cooking generally requires lower
temperatures than conventional cooking.
Follow the temperatures recommended in the
cooking chart. As a guide reduce temperatures
by about 20C° - 25°C for your own recipes,
using a conventional oven.
Using the main oven
Turn the main oven
temperature control
knob to the required
temperature.
Batch baking
The fan oven cooks evenly on all shelf levels,
especially useful when batch baking.
To fit the main oven shelves
The shelves should be fitted with the straight
rods uppermost on the frame and the forms
towards the back of the oven.
To remove a shelf slide the shelf towards you
until the shelf stop is reached. Tilt shelf up at
the front so that the stops clear the side
supports. Lift shelf clear.
To install a shelf, reverse the above steps.
Each shelf position has an upper and lower
support wire, ensure the shelf is placed between
these two support wires.
19
Page 20
To turn the main oven off
Turn the main oven
temperature control
knob to the off
position.
Things to note
•
The oven light will illuminate.
•
The indicator neon will glow. It may turn on
and off during use to show that the setting is
being maintained.
•
The cooling fan for the controls may operate
after a time.
•
The oven fan will operate.
•
If an automatic programme has been set, the
oven fan and light do not come on until
cooking begins.
Hints and tips
•
Arrange the shelves in the required positions
before switching the oven on. Shelf
positions are counted from the bottom
upwards.
20
•
When cooking more than one dish in the fan
oven, place dishes centrally on different
shelves rather than cluster several dishes on
one shelf, this will allow the heat to circulate
freely for the best cooking results.
•
When batch baking one type of food, e.g.
Victoria sandwich cakes, those of similar
size will be cooked in the same time.
•
It is recommended that when baking larger
quantities the shelf positions should be
evenly spaced to suit the load being cooked.
A slight increase in cooking time may be
necessary.
•
Do not place baking trays directly on the
oven base as it interferes with the oven air
circulation and can lead to base burning; use
the lower shelf position.
WARNING!
Do not place cookware and cooking pots
with rough bases e.g. cast iron on the oven
door as damage to the glass may occur.
Page 21
Oven cooking chart
The oven temperatures are intended as a guide only. It may be necessary to increase or
decrease the temperatures by to suit individual preferences and requirements.
Note: Shelf positions are counted from the bottom of the oven.
Note: Main oven shelf positions are not critical but ensure that they are evenly spaced when more
than one is used.
* = Shelf on the oven base
22
Page 23
Roasting chart
Meat Temperature Cooking time
Beef/ Beef boned 160-180°C
Mutton/Lamb 160-180°C
Pork/Veal/Ham 160-180°C
Chicken 160-180°C
Turkey/Goose 160-180°C
Duck 160-180°C
Pheasant 160-180°C
Rabbit 160-180°C
20-35 minutes per ½kg (1lb)
and 20-35 minutes over
25-35 minutes per ½kg (1lb)
and 25-35 minutes over
30-40 minutes per ½kg (1lb)
and 30-40 minutes over
15-20 minutes per ½kg (1lb)
and 20 minutes over
15-20 minutes per ½kg (1lb) up to 3½kg
(7lb) then 10 minutes per ½kg (1lb) over
3½kg (7lb)
25-35 minutes per ½kg (1lb)
and 25-30 minutes over
35-40 minutes per ½kg (1lb)
and 35-40 minutes over
20 minutes per ½kg (1lb)
and 20 minutes over
INTERNAL TEMPERATURES –
Rare: 50-60°C; Medium: 60-70°C; Well done: 70-80°C
The roasting temperatures and times given in the chart should be adequate for most joints, but
slight adjustments may be required to allow for personal requirements and the shape and texture of
the meat. However, lower temperatures and longer cooking times are recommended for less tender
cuts or larger joints.
Wrap joints in foil if preferred, for extra browning uncover for the last 20 – 30 min. cooking time.
23
Page 24
Defrost
This main oven function defrosts most foods
faster than some conventional methods. It is
particularly suitable for delicate frozen foods,
which are to be served cold e.g. cream filled
gateaux, cakes covered with icings or frostings,
cheesecakes, biscuits, scones, etc.
Using defrost To turn defrost off
Turn the main oven
temperature control
knob to the defrost
setting.
Hints and tips
•
Place the frozen food in a single layer where
possible and turn it over half way through the
defrosting process.
•
The actual speed of defrosting is influenced
by room temperature. On warm days
defrosting will be faster than on cooler days.
•
It is preferable to thaw fish, meat and poultry
slowly in the fridge. However, this process
can be accelerated by using the defrost
function. Small or thin fish fillets, frozen
peeled prawns, cubed or minced meat, liver,
thin chops, steaks etc., can be thawed in 1 –
2 hours.
•
A 1kg/2¼lb oven ready chicken will be
thawed in approximately 5 hours. Remove
the giblets as soon as possible during the
thawing process.
Things to note
•
The oven fan and internal oven light will
come on.
Turn the main oven
temperature control
knob to the off
position.
•
Joints of meat up to 2kg/4½lb in weight can
be thawed using the defrost function.
•
All joints of meat and poultry must be thawed
thoroughly before cooking.
•
Always cook thoroughly immediately after
thawing.
•
Do not leave food at room temperature once
it is defrosted. Cook raw food immediately
or store cooked food in the fridge, once it
has cooled.
•
Care must always be taken when handling
foods in the home. Always follow the basic
rules of food hygiene to prevent bacterial
growth and cross contamination when
defrosting, preparing, cooking, cooling and
freezing foods.
24
Page 25
Care and cleaning
WARNING!
Before cleaning always allow the appliance
to cool down before switching off at the
electricity supply.
Cleaning materials
•
Before using any cleaning materials on your
appliance, check that they are suitable and
that their use is recommended by the
manufacturer.
•
Cleaners that contain bleach should not be
used as they may dull the surface finishes.
Harsh abrasives and scourers should also
be avoided.
Cleaning the outside of the
appliance
•
Do not use abrasive cleaning materials e.g.
abrasive cream cleaners, wire wool pads or
scourers on painted or printed finishes as
damage may occur. Regularly wipe over the
control panel, doors and appliance sides
using a soft cloth and hot soapy water. To
prevent streaking, finish with a soft cloth.
•
Stainless Steel cream cleaners are abrasive
and should be avoided as they may dull the
surface finish. Any spillage on the
stainless steel finish must be wiped off
immediately.
WARNING!
Do not attempt to remove any of the control
knobs from the appliance as this may cause
damage and is a safety hazard.
Under no circumstances should the door
assembly be detached from the product for
cleaning.
Cleaning the control knobs and
handles
It is strongly recommended that only hot soapy
water be used for cleaning the control knobs
and handles. ANY OTHER CLEANING
MATERIALS MAY DULL THE SURFACE
FINISH.
Removing and replacing the
wirework runners
•
•
•
•
Ensure the wirework runners are firmly in
position before replacing the oven shelves.
Cleaning inside the ovens
•
WARNING!
Remove all shelves and furniture from the
oven.
Hold the wirework at the bottom, unclip from
the cavity side and gently pull towards the
centre of the oven.
Unhook the runner at the top and remove
from the cavity.
To replace the runners, hook the wirework
side runner into the cavity, slide back and
press into place.
WARNING!
The vitreous enamel coating in the grill/top
oven and main oven compartments can be
cleaned using normal oven cleaners with
care. Ensure that the manufacturers
instructions are followed and that all parts
are well rinsed afterwards.
25
Page 26
Cleaning the top oven roof
The grill element is hinged to make cleaning the
oven roof easier.
WARNING!
Switch off the appliance from the electricity
supply before cleaning and ensure the oven
is cold.
1. Remove the wirework side runners.
2. Undo the two screws, which hold the grill
element in place.
3. Gently pull the element downwards to allow
access to the oven roof. Do not force the
element downwards.
4. Clean the top of the oven with cream cleaner
and a sponge scourer. If heavily soiled,
aerosol oven cleaners may be used following
the instructions for cleaning the grill / top
oven compartment.
5. Gently push the grill element back into place.
6. Fit the screws to hold the element in place
and tighten firmly.
7. Replace the wirework side runners.
WARNING!
Ensure the screws are firmly in place after
cleaning.
WARNING!
Aerosol cleaners must not come into contact
with elements/burners, door seal, or any
painted finishes as this may cause damage.
Cleaning the door(s)
WARNING!
To prevent damaging or weakening the door
glass panels avoid the use of the following:
•
Household detergents and bleaches
•
Impregnated pads unsuitable for nonstick saucepans.
•
Abrasive cleaning pads, scourers and
steel wool pads.
•
Chemical oven pads or aerosols.
•
Rust removers.
•
Bath/Sink stain removers.
IMPORTANT!
The outer door glass is removable for cleaning.
To remove the outer door glass
1. Open the oven door slightly to gain access to
the two cross head screws on the top of the
oven door.
2. Loosen the two screws using a Pozidrive
screwdriver.
3. Hold the door glass securely in place with
one hand before removing the screws and
washers completely with the other hand. The
screws and washers retain the trim on the
top of the grill door. Note the position of the
trim on the door.
26
Page 27
4. Holding the door and glass with one hand,
gently pull towards you and slightly lift the
door glass with the other hand to disengage
the panel from the location point at the
bottom of the door. Gently release the door
to close it.
5. Clean the outer and inner glass using hot
soapy water or hob cleaner may be used.
Do not use hob cleaner on the Stainless
Steel or painted finishes. Do not try to clean
the foil, which is inside the door. The foil is
there to help keep the door cool, if it is
damaged it will not work. Ensure that all
parts are well rinsed and thoroughly dried
before attempting to replace the outer door.
WARNING!
If the door glass panel becomes chipped or
has deep scratches the glass will be
weakened and must be replaced to prevent
the possibility of the panel shattering.
Please contact your local service force
centre who will be pleased to advise further.
To replace the outer door glass
1. Holding the oven glass with both hands,
gently place the locators into the holes of the
brackets at the bottom of the oven door.
2. Holding the door glass with your left hand,
use your right hand to open the oven door.
Bring the door gently towards the glass
panel ensuring the screw location holes line
up.
3. Place the trim in the correct position on the
top of the grill door.
4. Hold the glass in place with one hand and
insert the crosshead screws with washers
into the location holes with the other hand.
Give the screws one turn to ensure the glass
is secure.
5. Tighten the screws positively with a
Pozidrive screwdriver before closing the
oven door.
WARNING!
Do not attempt to use the oven without the
glass being in place.
To clean the inner glass door
panels
The inner glass door is not removable.
Clean using a soft cloth and hot water to which
a little washing up liquid has been added. If the
inner panel is heavily soiled, hob cleaner may
be used. Do not use abrasive cleaning
materials on the door glass.
Ensure that all parts are well rinsed and
thoroughly dried before attempting to replace
the glass.
Cleaning the grill and oven
furniture
•
All removable parts, except the grill pan
handle can be washed in the dishwasher.
•
The grill pan, grill pan grid and oven shelves
may be cleaned using a soap impregnated
steel wool pad. Soaking first in hot soapy
water will make cleaning easier.
27
Page 28
Replacing an oven light bulb
(Main oven)
•
The type of bulb required is a 300°C 25 watt
small Edison Screw.
WARNING!
Disconnect the appliance from the electricity
supply before replacing the bulb.
•
Make sure the appliance is cool before
replacing the bulb.
•
Open the oven door and remove the shelves
and wirework runners.
•
Pull the glass bulb cover towards you and
then pull it off. If necessary, use a
screwdriver to carefully lever off the cover,
taking care not to damage the oven cavity.
•
Unscrew the bulb by turning it to the left.
•
Fit a new bulb and then replace the glass
bulb cover.
•
Refit the wirework runners and replace the
oven shelves.
Restore the electricity supply and reset the
•
time of day.
Replacing an oven light bulb
(Top oven)
•
The type of bulb required is a 300°C 25 watt
small Edison Screw.
WARNING!
Disconnect the appliance from the electricity
supply before replacing the bulb.
•
Make sure the appliance is cool before
replacing the bulb.
•
Open the oven door and remove the
shelves and wirework runners.
•
Remove the glass cover by turning it to the
left.
•
Unscrew the bulb by turning it to the left.
•
Fit a new bulb and then replace the glass
bulb cover.
•
Refit the wirework runners and replace the
oven shelves.
•
Restore the electricity supply and reset the
time of day.
28
Page 29
Troubleshooting
•
Maintenance must only be carried out by a
competent/qualified person. Do not try to
alter/modify the appliance yourself, as this
could be dangerous.
•
Please carry out the following checks on
your appliance before calling a Service
Engineer. It may be that the problem is a
simple one that you can solve yourself
without the expense of a service call.
PROBLEM POSSIBLE SOLUTION
The grill, ovens and timer do not work. Check that the appliance has been wired in to the
Check that the main appliance fuse is working.
If you have checked the above:
The grill and top oven work but the main oven does not.
The grill does not work or cuts out after being used for a
long period of time.
Leave the grill door open and allow the grill to cool. After
The timer does not work. Check that the instructions for the operation of the timer
The indicator neons are not working correctly.
The oven is not cooking evenly. Check that the appliance is correctly installed and is
Check that the recommended temperatures and shelf
The oven light fails to illuminate. The oven light bulb may need replacing.
If the Main Oven is set for automatic cooking the light
The oven fan is noisy. Check that the oven is level.
Check that the shelves and bakeware are not vibrating
The oven temperature is too high or too low. Check that the recommended temperatures and shelf
•
In-guarantee customers should make
sure that the checks have been made as
the engineer will make a charge if the
fault is not a mechanical or electrical
breakdown.
•
Please note that proof of purchase is
required for in-guarantee service calls.
appliance supply and is switched on at the wall.
Allow the appliance to cool for a couple of hours. The
appliance should now be working normally.
Check that the time of day has been set on the clock.
Check that the oven is set for manual cooking.
Ensure the cooling fan is running when the grill is on. If
the cooling fan fails, the grill will not operate correctly.
Contact your local service force centre.
a couple of hours check that the grill works as normal.
are being closely followed.
Check that you have selected only the function you
require. Ensure all other controls are in the off position.
level.
positions are being used.
will illuminate when the cook time begins.
in contact with the oven back panel.
positions are being used. Be prepared to adjust the
temperature up or down slightly to achieve the results
you want.
29
Page 30
Technical details
Voltage 230-240 Volts AC 50Hz
Power consumption 5.0-5.4kW
Height: 888mm
Width: 592mm
Depth: 563mm (excluding handles and knobs)
Weight: 55Kg
This appliance complies with: European Council Directive 73/23/EEC.
EMC Directive 89/336/EEC. CE Marking Directive 93/68/EEC.
Energy Label Directive 2002/40/EC.
Environment
After installation please dispose of the
packaging with due regard for safety and the
environment. Your local authority can arrange
this.
Energy save mode
•
By switching off the time display you can
save energy.
Switching off the time display
•
Press and hold any two buttons until the
display switches off.
Switching on the time display
•
Press any button to switch on the display.
IMPORTANT!
The display can only be switched off if none of
the timer functions, 'Cooktime', 'Endtime', or
'Countdown', is in use.
30
At the end of the appliances life
The symbol on the product or on its
packaging indicates that this product may not be
treated as household waste. Instead it shall be
handed over to the applicable collection point
for the recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local city office, your
household waste disposal service or the shop
where you purchased the product.
Page 31
Installation instructions
WARNING!
•
This appliance must be installed by a
qualified electrician/competent person.
Safety may be impaired if installation is
not carried out in accordance with these
instructions.
•
This appliance must be earthed.
•
Do not remove the screws from the earth
tab extending from the oven mains
terminal block
•
Before connecting the appliance make
sure that the voltage of your electricity
supply is the same as that indicated on
the rating plate. T
the front frame of the appliance and can be
seen upon opening either the main or top
oven door. Alternatively the rating plate
may also be found on the back or top of
some models (where applicable).
•
Do not alter the electrical circuitry of this
appliance.
his is usually situated on
Things to note
•
This appliance is designed to be fitted in
cabinets of the recommended dimensions as
shown (Recommended cabinet dimensions).
•
If your cabinet interior dimension is between
565- 570mm the oven may still be fitted.
However, a minor modification to the cabinet
will be required to reduce the aperture size
down to 560-565 mm, to allow the product to
be securely screwed into the cabinet.
•
The dimensions given provide adequate air
circulation around the unit within the cabinet,
ensuring compliance with BS EN60-335.
•
Enquiries regarding the installation of the
cooker point, if required, should be made to
your Regional Electricity Company to ensure
compliance with their regulations.
•
The appliance socket switch should be
outside the cabinet but within 2m of the
appliance to make it accessible to switch off
the appliance in case of an emergency.
•
To protect the hands, wear gloves when
lifting the oven into its housing.
WARNING!
Do not lift the appliance by the handles.
IMPORTANT!
House circuit
Earth leakage and continuity tests must be
carried out before the appliance is connected to
the mains supply and re-checked after fitting.
31
Page 32
Choice of electrical
connections
•
There are three possible ways to connect
your appliance. In each case the appliance
should be operated using at least 6mm2 twin
core and earth PVC insulated. Please
choose from the most appropriate after
reading the different methods: a) By connecting the appliance to a cooker
point (having a double pole isolating
switch with at least 3mm contact
separation in all poles and neutral) and
protected with a fuse or miniature circuit
breaker at your mains fuse box.
IMPORTANT!
Subject to Regional Electricity
Companies regulations if you wish to
connect the oven and hob to the power
supply you may use one of the following
two methods: -
b) By connecting the appliance together
with a hob directly to a cooker point(s).
Having a double pole isolating switch with
at least 3mm contact separation in all
poles and neutral.
c) If you wish to connect an oven and a hob
to a cooker point you can by connecting
the oven and hob separately to the
cooker point. Oven and hob units should
be separately connected to a cooker
point.
32
IMPORTANT!
It is good practice to:
•
Fit an Earth Leakage Circuit Breaker to your
house wiring.
•
Wire your appliance to the latest IEE
regulations.
Preparing cabinet for fitting of
oven
•
Make sure that the cabinet is the correct size
for the appliance to be fitted (Recommended
cabinet dimensions).
•
If the size is between 565-570mm, then the
cabinet should be modified so that at the
screw fixing points the recommended
dimension of at least 560-565mm is
maintained. The modification should ideally
be localised to ensure that after screw
fitment the oven is securely fixed into
position.
•
The cabinet must be stable and level by
firmly securing it to the wall or floor. If
necessary, make arrangements to ensure
the shelf upon which the oven will rest is
level.
•
When the appliance is installed ensure a
minimum gap of 2mm is maintained between
the trim on the bottom edge of the appliance,
and any corresponding door / panel
underneath.
Page 33
Recommended cabinet dimensions (mm)
33
Page 34
Installation instructions continued
•
How to finish unpacking
•
Place packed appliance next to the space
in which it will be installed.
•
Remove the appliance packing except for
bottom tray, which should be left in position
until the appliance is ready to be fitted into
its cabinet.
IMPORTANT!
It is imperative that the appliance is left in the
base to protect both the appliance and the floor.
•
Ensure the user is given these operating
instructions.
IMPORTANT!
Important: Switch off at the mains, miniature
circuit breaker and if appropriate, remove fuse
before commencing any electrical work.
Prise cover loose using screwdriver in
position (1) then lever off with screwdriver in
position (2) at either side.
•
Lift cover and remove screw from cable
clamp.
To remove the mains
terminal cover
•
From the rear of the appliance, remove
mains input terminal cover to gain access to
terminal block.
•
First remove retaining screw with pozidrive
screwdriver.
34
Connecting to the mains
terminal
WARNING!
This appliance must be earthed.
•
We recommend you use a new length of
6mm2 twin core and earthed cable to ensure
your safety.
•
Make connection as shown below by
proceeding as follows: -
•
Pre-form wires to the appropriate shape to
suit fitting into the mains terminal block.
•
Strip inner insulation on wires using wire
strippers.
Page 35
•
Twist the bared wires using pliers.
•
Cut bared wires 10mm away from the end of
the inner insulation. Where un-insulated
Earth wires are used ensure they are
suitably sheathed to leave 10mm bare wire
to fit into the terminal.
•
Clamp bare wires into the relevant terminal
and check they are held by tugging each one
in turn.
•
Clamp the mains cable securely ensuring
5mm of the outer insulation is inside the
terminal block and that the wires are not
taught but not so slack as to cause any
fouling.
•
Place fuse/miniature circuit breaker in circuit
and switch on at mains.
Checking electrical connections
Correct electrical connection can be confirmed
when switching on the appliance, as the timer
will be flashing.
IMPORTANT!
House circuit
Earth leakage and continuity tests must be
carried out before the appliance is connected to
the mains supply and re-checked after fitting.
Connecting to a hob or cooker
point
•
Either follow in general terms the instructions
for connecting to the terminal block or refer
to the hob suppliers installation instructions.
Feed the cable through the cabinet and
arrange to route the cable away from the
appliance which may become hot.
Fitting into the cabinet
IMPORTANT!
Ensure that the oven is switched off at the wall
before any further work is carried out.
•
Using a tape measure establish the internal
width of the cabinet. Refer to recommended
cabinet dimensions if greater than 565mm.
•
Position the appliance in front of the cabinet.
•
Take out all oven furniture before installation
to reduce the weight you need to lift. The
oven door should be taped up to keep it
closed whilst lifting.
•
To place the appliance into the cabinetry
follow the procedure below:
WARNING!
35
Page 36
IMPORTANT!
Two people will be required to carry out the
lifting procedure.
WARNING!
Do not attempt to lift this appliance by the
handle(s).
•
Each person should squat either side of the
appliance.
•
Tilt the appliance so that your hands can
support the underside of the appliance.
•
Keeping your back straight, raise the
appliance to the correct height by
straightening at the knees.
•
Rest the rear underside of the appliance on
the cabinet floor while your hands support
the front.
•
The appliance can be pushed fully into the
cabinet. Take care to avoid fouling the mains
lead.
•
Ensure the appliance is central and level.
•
Do not remove spacers fitted behind fixing
holes.
•
When the appliance is fully housed screw
the stability screws (supplied with the
appliance) into the side of the cabinet taking
care not to distort the side trims. It is
advisable to turn each screw alternatively to
avoid damaging the trims.
•
Switch on the appliance then refer to the
operating instructions.
Fixing points for stability
screws
36
Page 37
Service and spare parts
In the event of your appliance requiring service,
or if you wish to purchase spare parts, please
contact your local service force centre by
telephoning: -
0870 5 929929
Your telephone call will be automatically routed
to the service force centre covering your
postcode area.
For the address of your local service force
centre and further information about service
force, please visit the website at
www.serviceforce.co.uk.
Before calling out an engineer, please ensure
you have read the details under the heading
"Something Not Working?"
When you contact the service force centre you
will need to give the following details:
•
Your name, address and postcode.
•
Your telephone number.
•
Clear and concise details of the fault.
•
The model and serial number of the
appliance (found on the rating plate).
•
The purchase date.
Please note that a valid purchase receipt or
guarantee documentation is required for inguarantee service calls.
Customer care department
For general enquires concerning your Moffat
appliance or for further information on Moffat
products, please contact our customer care
department by letter or telephone at the address
below.
Customer Care Department
Moffat
Major Appliances
Addington Way
Luton
Bedfordshire
LU4 9QQ
Tel: 0870 5 727 727 (*)
*Calls to this number may be recorded for
training purposes.
37
Page 38
Guarantee conditions
Standard guarantee conditions
We, Moffat, undertake that if within 12 months
of the date of the purchase this Moffat appliance
or any part thereof is proved to be defective by
reason only of faulty workmanship or materials,
we will, at our option repair or replace the same
FREE OF CHARGE for labour, materials or
carriage on condition that:
•
The appliance has been correctly installed
and used only on the electricity supply stated
on the rating plate.
•
The appliance has been used for normal
domestic purposes only, and in accordance
with the manufacturer’s instructions.
•
The appliance has not been serviced,
maintained, repaired, taken apart or
tampered with by any person not authorised
by us.
•
All service work under this guarantee must
be undertaken by a service force centre.
•
Any appliance or defective part replaced
shall become the Company’s property.
•
This guarantee is in addition to your statutory
and other legal rights.
38
Home visits are made between 8.30am and
5.30pm Monday to Friday. Visits may be
available outside these hours in which case a
premium will be charged.
Exclusions
This guarantee does not cover:
•
Damage or calls resulting from
transportation, improper use or neglect, the
replacement of any light bulbs or removable
parts of glass or plastic.
•
Costs incurred for calls to put right an
appliance, which is improperly installed, or
calls to appliances outside the United
Kingdom.
•
Appliances found to be in use within a
commercial environment, plus those, which
are subject to rental agreements.
•
Products of Moffat manufacture which are
not marketed by Moffat.
Page 39
European guarantee
•
This appliance is guaranteed by Electrolux
in each of the countries listed below for the
period specified in the appliance guarantee
or otherwise by law. If you move from one
of these countries to another of the
countries listed below the appliance
guarantee will move with you subject to the
following qualifications: -
•
The appliance guarantee starts from the
date you first purchased the appliance
which will be evidenced by production of
a valid purchase document issued by
the seller of the appliance.
•
The appliance guarantee is for the same
period and to the same extent for labour
and parts as exists in your new country
of residence for this particular model or
range of appliances.
The appliance guarantee is personal to
the original purchaser of the appliance
and cannot be transferred to another
user.
•
The appliance is installed and used in
accordance with instructions issued by
Electrolux and is only used within the
home, i.e. is not used for commercial
purposes.
•
The appliance is installed in accordance
with all relevant regulations in force
within your new country of residence.
The provisions of this European Guarantee do
not affect any of the rights granted to you by
law.