Moffat GP8900G-LS, GP8900G-RB, GP8900G-B, GP8900G-CB User Manual

Technical data sheet for

GAS GRIDDLE 900mm

GP8900G-B, GP8900G-CB, GP8900G-LS, GP8900G-RB

GP8900G-LS

Heavy-duty thermostatic gas griddle

20mm thick griddle plate

Ribbed plate options

Chromed mirror plate options

Top weld sealed plates

80MJ thermostatic burner system

Separate left and right heat zones

3 models of base unit

1 model of ventilated 2 drawer refrigeration base

Stainless steel exterior

Easy clean

Easy service

Fully modular

Overall Construction

Griddle

• 20mm thick machined top plates standard

• Optional ribbed plate sections

• Optional mirror finish hard chrome plates

• 2.5mm thick 304 stainless steel splash guards sides and rear

• 2.0mm thick grease channel

• Two 40MJ 3 bar even heat burners with dual thermostatic controls

• Full pilot and flame failure protection with piezo ignition

• Welded hob surround with 1.5mm 304 stainless steel bull nose

• Splashback and side panels 1.2mm 304 stainless steel

• Front panels 0.9mm 304 stainless steel

• Stainless steel grease drawer

• Overlapping finish at front and rear of plate for easy clean

Bench mount (supplied as –B model)

• Four 63mm dia. heavy-dut y 1.2mm 304 stainless steel bench legs
with adjustable feet.

• Adjustable height 80mm – 105mm

Cabinet base (supplied as –CB model)

• Fully modular for match suite finish

• Double skin 0.9mm 304 stainless steel interior and exterior

• Optional GN 1/1 4 position racking kit (1 or 2 cabinet bays)

• Up to eight 65mm GN 1/1 capacity

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
adjustable feet

Leg Stand (supplied as –LS model)

• Fully modular for matched suite finish

• Framed top for connection to Griddle

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
adjustable feet

• Fully modular framed st and shelf with 0.9mm 304 stainless steel finish

• Suitable for rear or through shelf gas connection to Griddle

• Quick assembly design (no tools required)

Refrigerated base (supplied as –RB model)

• Self contained suite matched modular base

• Ventilated system with R134a refrigerant

• -2˚ to + 8˚C temperature (Tropical Climate rated)

• Two GN 1/1 drawers

• 100mm deep pan capacity

• Heavy-duty European telescopic drawer guides

• Magnetic drawer gaskets (replaceable without tools)

• 50mm fully foamed CFC free insulation

• 304 stainless steel exterior and interior

• Anti-corrosion treated evaporator

• No condensate drain required

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
adjustable feet

• Condensing unit removable through front of unit for service

• Easy clean interior

Controls

Griddle

• Separate left and right side heat zones

• Two 90-300˚C thermostats

• Large easy use control knobs - heat resistant reinforced

• Easy view control settings on knobs

• Flame failure pilot burners

• Piezo ignition to each pilot burner

Refrigerated base

• Digital control electronic thermostat

• Automatic defrost

• Automatic evaporation of defrost water

• -2 to +8˚C temperature range

Cleaning and Servicing

• All models with easy clean stainless steel external finish

• Plate is finished front and rear with overlap construction to remove
cleaning traps

• Control service and gas conversion through front of unit

• Burner service requires plate removal

• Refrigerated Base condenser removable through front of unit

Technical data sheet for

GAS GRIDDLE 900mm

Specifications

Griddle

Burner

Two 3 bar chromed steel burners
Individual pilot, flame failure and piezo ignition

Gas power

80MJ/hr, 22.2kW

Plate

Cooking surface 892mm x 530mm, 4728cm2

Gas connection

3

/4 (BSP) male

R
130mm from RH side, 32mm from rear,

and 655mm from floor
All units supplied w ith Natural and LP gas regulator

Refrigerated base

Typ e

Ventilate d syste m

Refrigerant

R134a (160grams)

Climate classification

T – tropical

Electrical connection

220-240Vac, 50Hz, 1.8A, 1P+N+E
3 pin 10A plug cordset f itted

Dimensions

Bench models

Width 900mm
Depth 805mm
Height 315mm
Incl. splashback 530mm

All models (excluding Bench model)

Width 900mm
Depth 805mm
Height 915mm
Incl. splashback 1130mm

Pack ing data

Bench and Leg Stand models

0.54m3
Width 940mm
Depth 865mm
Height 665mm

Cabinet Base and Refrigerated Base models

1.02m3
Width 940mm
Depth 865mm
Height 1255mm

Gas types

Available in Natural gas and LP gas
Please specif y when ordering
Units supplied complete with gas type

conversion kits
Other gas types on request

Options at extra cost

Joining caps
Castors
Plinth mounting
Ribbed plate options
Chrome plate options

GP8900G-B
Bench Model

GP8900G-CB
Cabinet Base

GP8900G-LS
Leg Stand

GP8900G-RB
Refrigerated Base

Plan

Australia

www.moffat.com.au

New Zealand

www.moffat.co.nz

Australia
Moffat Pty Limited

Victoria/Tasmania

740 Springvale Road
Mulgrave, Victoria 3170
Telephone [phone]
Facsimile 03-9518 3833
[e-mail]

New South Wales

Telephone [phone]
[e-mail]

South Australia

Telephone [phone]
[e-mail]

Queensland

Telephone [phone]
[e-mail]

Western Australia

Telephone [phone]
[e-mail]

New Zealand
Moffat Limited

Christchurch

Telephone [phone]
[e-mail]

Auckland

Telephone [phone]
[e-mail]

ISO9001

Quality
Management
Standard

Designed and manufactured by

ISO9001
All Waldorf products are designed and
manufactured by Moffat using the
internationally recognised ISO9001 quality
management system, covering design,
manufacture and final inspection, ensuring
consistent high quality at all times.

In line with policy to continually develop and
improve its products, Moffat Limited reserves
the right to change specifications and design
without notice.

Printed in New Zealand

© Copyright Mo ffat Limited

Moffat/4639/BH/1M/8.05