Moffat GP8121GEC User Manual

Technical data sheet for

GAS GRIDDLE CONVECTION ELECTRIC
OVEN RANGE 1200mm

GP8121GEC

Heavy-duty thermostatic gas griddle

20mm thick griddle plate

Ribbed plate options

Chromed mirror plate options

Top weld sealed plates

108MJ thermostatic griddle burner system

Separate left, centre, and right heat zones

GN 2/1 6.6kW electric convection oven

Drop down door

Storage cabinet on right hand side

Stainless steel exterior

Easy clean

Easy service

Fully modular

Overall Construction

• Galvanized steel chassis

• Welded hob surround with 1.5mm 304 stainless steel bull nose

• Splashback and hob sides 1.2mm 304 stainless steel

• Front panels and oven sides 0.9mm 304 stainless steel

• Full 0.9mm stainless steel storage cabinet on right hand side

• 150mm legs in 63mm dia. heavy-duty 1.2mm 304 stainless steel with
adjustable feet

Griddle

• 20mm thick machined top plates standard

• Optional ribbed plate sections

• Optional mirror finish hard chrome plates

• 2.5mm thick 304 stainless steel splash guards sides and rear

• 2.0mm thick grease channel

• Three 36MJ 3 bar even heat burners with dual thermostatic controls

• Full pilot and flame failure protec tion with piezo ignition

• Stainless steel grease drawer

• Overlapping finish at front and rear of plate for easy clean

Oven

• Fully welded and vitreous enamelled oven liner

• GN 2/1 capacity with 4 position racking

• Heavy-duty easy remove heavy wire chrome rack suppor ts

• Cast iron even heat oven sole plate

• 6.5kW heating elements

• 100W heavy-duty motor

• 200mm diameter heavy- duty circulation fan

• Welded frame drop down do or with heavy-dut y spring hinge system

• 0.9mm 304 stainless steel door outer

• 1.0mm press formed vitreous enamelled door inner

• High density fibreglass insulated

• Stay cool stainless steel door handle with cast metal handle mounts

• Supplied with two chrome wire oven racks

Controls

• Large easy use control knobs - heat resistant reinforced

• Easy view control settings on knobs

Griddle

• Separate left, centre and right side heat zones

• Three 90-300˚C thermostats

• Flame failure pilot burners

• Piezo ignition to each pilot burner

Oven

• 50-320˚C thermostatic control

• Indicator lights for power and heating

Cleaning and Servicing

• All models with easy clean stainless steel external finish

• Plate is finished front and rear with overlap construction to remove
cleaning traps

• Control service and gas conversion through front of unit

• Burner service requires plate removal

• Removable oven racking and sole plate

• Easy clean vitreous enamel oven and door inner

• Door hinge spring adjustable on unit (door outer removed)

• Door disengages for lift off removal and increased ser vice access

• Access to all parts from front of unit

Technical data sheet for

GAS GRIDDLE CONVECTION ELECTRIC
OVEN RANGE 1200mm

Specifications

Burners

Three 36MJ 3 bar chromed steel burners - Griddle
Individual pilot, flame failure and piezo ignition

Elements

4.5kW bot tom heat element

2.0kW top heat element

Oven Fan Motor

100W

Gas power

108MJ/hr, 30kW

Electrical requirements

6.6kW

1 phase connec tion:

230-240Vac, 50/60hz, 1P+N+E, 27.7A

3 phase connec tion:

400-415Vac, 50/60hz, 3P+N+E
L1 9.4A
L2 9.4A
L3 9.0A

Plate

Cooking surf ace 1192mm x 530mm, 6318cm2

Oven Dimensions

Width 665mm
Depth 590mm
Height 385mm
Rack size 660mm x 54 0mm
Rack positions 4

Gas connection

3

/4 (BSP) male

R
130mm from RH side, 32mm from rear,

and 655mm from floor
Optional underside connection

(refer specification drawing)
All units supplied w ith Natural and LP gas regulator

Electrical connection

369mm from RH side, 484 mm from rear,
and 150mm from fl oor

Dimensions

Width 1200mm
Depth 805mm
Height 915mm
Incl. splashback 1130mm

Pack ing data

1.37m3
Width 1240mm
Depth 865mm
Height 1255mm

Gas types

Available in Natural gas and LP gas
Please specif y when ordering
Units supplied complete with gas type

conversion kits
Other gas ty pes on request

Options at extra cost

Joining caps
Castors
Plinth mounting
Ribbed plate options
Chromed plate opti ons

GP8121GEC

Australia

www.moffat.com.au

New Zealand

www.moffat.co.nz

Australia
Moffat Pty Limited

Victoria/Tasmania

740 Springvale Road
Mulgrave, Victoria 3170
Telephone [phone]
Facsimile 03-9518 3833
[e-mail]

New South Wales

Telephone [phone]
[e-mail]

South Australia

Telephone [phone]
[e-mail]

Queensland

Telephone [phone]
[e-mail]

Western Australia

Telephone [phone]
[e-mail]

New Zealand
Moffat Limited

Christchurch

Telephone [phone]
[e-mail]

Auckland

Telephone [phone]
[e-mail]

ISO9001

Quality
Management
Standard

Designed and manufactured by

ISO9001
All Waldorf products are designed and
manufactured by Moffat using the
internationally recognised ISO9001 quality
management system, covering design,
manufacture and final inspection, ensuring
consistent high quality at all times.

In line with policy to continually develop and
improve its products, Moffat Limited reserves
the right to change specifications and design
without notice.

Printed in New Zealand

© Copyright Mo ffat Limited

Moffat/4639/BH/1M/8.05